ReviewsSerial To Usb Converter

DTECH FTDI USB to TTL Serial 5V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 10 8 7 Linux MAC OS 6ft Black

  • 6 ft FT232 USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header 5V TTL to USB converter cord is compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

DTech Slim USB to Hard Drive Cable HDD SSD 3.5 2.5 Inch 22 pin SATA to USB 2.0 Adapter with Power Supply LED Indicators External Converter for Laptop Desktop Computer SATAIII Disk Data Transfer

  • 15+7 pin SATA adapter - USB to SATA power cable connects standard (15 + 7) 22 pin 2.5 inch or 3.5 inch external hard drive enclosure to your desktop....
  • USB to SATA cable is equipped with a DC Jack port, this slimline USB to hard drive serial ata adapter with power supply enables you to use 3.5 in HDD....
  • SATA 3 to USB converter with LED INDICATORS design for easy trouble shooting.
  • supports SATA III, II, I, and is compatible with Windows10 / 8/ 7/ XP/....
  • USB HDD sata power cable enables you to connect hard disc to android phone (with OTG function), or directly connected to your TV for watching movies....
  • Portable HDD SDD sata data to USB transfer cord is plug and play, no driver needed.
  • four non-slip mats can be glued to your serial ATA hard disk for....
Check Stock

DTECH FTDI USB to TTL Serial 3.3V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 11 10 8 7 Linux 6ft Black

  • 6 ft FT232 USB to TTL serial adapter 3.3V (with 6 pin 0.1” pitch female socket header) connects devices with 3.3 V logic level UART signals....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable 3V3 (6 way outputs) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND (power line provides 5V and data....
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header USB TTL UART converter cord is compatible with Windows 11, 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, MacOS, Linux 2.4 and greater.
Check Stock

SparkFun ESP8266 Thing - Dev Board - WiFi-enabled microcontroller compatible with Arduino for Internet of Things WiFi Development On-board FTDI USB-to-Serial converter PCB trace antenna U.FL connector

  • All module pins broken out for ease of use. On-board FTDI USB-to-Serial. +19.5dBm output power in 802.11b mode.
  • 802.11 b/g/n. Wi-Fi Direct (P2P), soft-AP. Integrated TCP/IP protocol stack.
  • Integrated TR switch, balun, LNA, power amplifier and matching network. Integrated PLLs, regulators, DCXO and power management units.
  • Integrated low power 32-bit CPU could be used as application processor.
  • The USB-to-serial converter means you don't need any peripheral components to program the chip. Simply plug in a micro USB cable..
Check Stock

StarTech.com 1 Port RS232 to Ethernet IP Converter / Device Server - Aluminum - Serial over IP Device Server - Serial to IP Converter (NETRS2321P)

  • ACCESS YOUR SERIAL DEVICES REMOTELY: Use this RS232 to Ethernet IP converter to connect to, configure and remotely manage an RS232 serial device over an IP network.
  • DURABLE CONSTRUCTION: Built with a rugged aluminum housing, this serial to IP Ethernet device server delivers a reliable performance that can be used in almost any environment.
  • FLEXIBLE INSTALLATION: This serial to IP converter can be mounted to a surface or on a DIN rail with the built-in mounting bracket and included DIN rail clips.
  • Access a serial device from anywhere with an IP-based connection.
  • Mount on DIN-rails or on a wall with the attached mounting brackets.
  • Suitable for hash environments with a rugged, aluminum enclosure.
  • Configure via web browser or Virtual Com software interface.
  • Support for DHCP, HTTP, ICMP, ARP, IP, UDP, TCP.
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

Industrial Serial Rs232 Rs485 Rs422 to Fiber Converter Bidirectional High Speed Optic Modem Sc Single Mode 20km 1310nm Serial over Fiber Converter

  • Bi-directional high Speed Serial Data – The Serial Optic Modem have 1ch RS232, 1Ch RS485, 2Ch high Speed RS485, all are Bi-directional. Serial data is fully transparent, baud rate is self-adaptive, no setting is required..
  • High Speed RS485 RS422 – The Serial Fiber Extender's 2Ch RS485H can be grouped into 1Ch High Speed RS422 which can used for DMX512 communication in Stage Lighting Control..
  • 12~48V DC Input – The RS232 /RS485 /RS422 fiber media converter support 12~48V DC Input. Wide range voltage makes it compatible with more DC power supply system..
  • Industrial Grade Quality – Use industrial grade components and aluminum housing, it can work at wide range temperature -40°C to 75°C (-40°F to 167°F). You can use it in outdoor harsh environment..
  • Din-Rail & Wall Mount –The media converter come with 35mm Din-rail Clip and Wall mount accessories..
Check Stock

DSD TECH SH-RJ12A USB to RJ12 6P4C RS232 Serial Cable with FTDI Chip

  • USB to RJ12 6P6C RS232 FTDI Serial Converter APC PDU Cable for APC UPS 940-0144.
  • USB to RJ-12 PDU is a fully compatible replacement cable for APC 940-0144 and 940-0144a in a USB version.
  • Durable molded cable on both ends. Tested to perform as the original PDU 940-0144 Cable.
  • Compatible with APC metered and switched PDU AP78xx, AP79xx, AP86xx, AP88xx, AP89xx, etc.
  • FTDI chipset allows for easy installation on Windows, MacOS, and Linux. Linux has driver installed by default. Windows automatically downloads the driver from windows update Drivers are available for download if needed.
Check Stock

DTECH 6 Feet USB to RS232 DB9 Female Serial Adapter Cable Windows 11 10 8 7 Mac Linux Serial to USB 2.0 (PL2303 Chip)

  • RS232 USB to serial female adapter cable allows any PC to connect serial devices and programs that communicate through COM ports.
  • DB9 Serial cable to USB adapter is designed for connecting Serial devices such as DB9 equipped PCs, routers, GPS, Programming machine, barcode scanners, label writers, serial modems, digital cameras, card readers, palm PCs and digital organizers, etc.
  • 6ft USB to serial cable with standard USB Type A Male to standard 9-pin DB9 Female RS-232 serial connector.
  • USB to RS232 adapter is with Prolific PL-2303 Chipset for widest possible compatibility with Windows 11, 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms..
  • Note that the interface is 9-pin RS232 Female socket, please make sure that your serial device with a 9-pin Male Port before purchasing this USB to serial port adapter with Prolific PL2303 chipset (NOT FTDI chip).
Check Stock

DIGI XBP9B-DPST-001 RF TXRX Module XBee-PRO 900HP S3B Point2Multipoint 900MHz 250mW RPSMA 10Kbps

  • Plug the unit directly into your USB port and have it act as a gateway between your computer and the XBee..
  • This unit works with all XBee modules including the Series 1 and Series 2.5, standard and Pro version.
Check Stock

6PCS 3D Printer TMC2208 V1.2 Stepper Motor Driver, TMC2208 Stepstick Stepper Motor Driver Module with Heat Sink Screwdriver for 3D Printer Controller Boards Reprap Ramps1.4 MKS Gen Ender-3 Pro

  • TMC2208 is an ultra-quiet two-phase stepper motor drive chip, continuous drive current 1.4A, peak current 2A, voltage range 4.75V-36V, 256 subdivision..
  • The flexible microPlyer interpolation unit provides up to 256 subdivisions, allowing perfect sinusoidal control even in systems with limited pulse frequencies.
  • these are also designed because stealthChop2 ultra-quiet technology is widely used in 3D printing..
  • Compatible with existing 3D printer electronics, eliminating the expensive costs of redesign. It can replace the original TMC2100 A4988 DRV8825 LV8729, lower heat, especially for 3D printing market..
  • With this adapter you can test your SilentStepStick or flash the TMC2208 SilentStepStick with an USB-to-serial converter..
  • The adapter comes with stackable headers, so you can use it direct on your 3D printer board. The tester is pre-configured for standalone operation on an USB to serial adapter (VIO-VM jumper closed)..
Check Stock