ReviewsSerial Usb

Treedix USB to TTL Converter CH340 Module 3.3V/5.5v Serial Converter Development Tool with Micro USB Adapter for Arduino

  • Serial Basic Breakout Board CH340G serial signal serial ic breakout development board usb micro b connector save space diy electronics projects micro b cable jumper wires.
  • Base on USB converter IC CH340G, there is a wide range of operating systems . You may need to install drivers the first time you connect the chip to your computer's USB port or when there are operating system updates..
  • The output voltage is 3.3v by default, there is a 3.3v signal, it can also be changed to 5V, changing to 5V will cause the board to output 5V and 5V signals on the VCC pin(3 .3v to 5V by a short circuit selection).
  • There are two LEDs on the board connected to TX (green) and RX (yellow) for faster viewing of serial traffic.
  • Suitable for: Arduino Pro Mini, our GPS module, cellular module and many other devices that use serial communication.
Check Stock

USB to Serial Adapter, Benfei 6 Feet USB to RS-232 Male (9-pin) DB9 Serial Cable, Prolific Chipset, Windows 10/8.1/8/7, Mac OS X 10.6 and Above

  • HOW IT WORKS: BENFEI USB to RS232 DB9 Male Serial Adapter is designed for connecting to serial devices such as DB9 equipped serial modems, ISDN Terminal Adapters, digital cameras, label writers, palm PCs, barcode scanners, PDAs etc through USB port with 1Mbps data transfer rate.
  • CONNECTORS: With standard USB Type A Male to standard Male 9-pin DB9 RS-232 serial connector.
  • Pay attention, it's not the USB to VGA(DB15) solution, unable to mirror video/audio to external montor. It's the USB to DB9 solution..
  • CONDUCTOR & SHIELDING: Tinned Copper Conductor(Wire guage#24#28) and triple shielding ensure the best data transfer rate. Powered by USB port, no external power adapter required. Simple installation, plug & play after one time driver installation.
  • WIDE COMPATIBILITY: USB to RS232 adapter is with Prolific PL-2303 Chipset for widest possible compatibility with Windows 10, 8, 7, XP, Vista, 2000, 98, MacOS8 or higher, Linux 2.4.0 and later, and other platforms..
  • 18 MONTH WARRANTY: Exclusive BENFEI Unconditional 18-month Warranty ensures long-time satisfaction of your purchase.
  • Friendly and easy-to-reach customer service to solve your problems timely.
Check Stock

Gearmo 16in USB 2.0 to RS-232 Serial Converter w/LED Indicators & FTDI

  • USB TO RS232 SERIAL – 5ft in length serial adapter. Connect legacy DB-9 serial communications devices to a modern computer with USB.
  • EASY TEST - Easy test RS-232 host to device link. With a full LED, dual color display, tester output. This will make testing your connections with....
  • COMPATABILITY - With support on multiple OS platforms this makes our USB RS- 232 very versatile. Supported OS platforms are Windows 7, 8 and 10 as....
  • WHY Gearmo? Your Trusted Partner based in the USA, Providing Advanced Engineering, Highly Reliable and Superior Built Products to handle the most....
  • RS-232 - DB9 / M Data rate : Over 1000kbps.
Check Stock

Cable Matters USB C to Serial Adapter Cable (USB-C to Serial, USB C to DB9, USB C to RS232) 3 ft - Thunderbolt 4 / USB4 / Thunderbolt 3 Port Compatible with Dell XPS 13, 15, Surface Pro and More

  • USB C to RS232 adapter cable connects from the USB-C port of a computer to a device with a female DB9 port.
  • USB bus-powered cable connects to devices for configuration or programming.
  • Male to male serial to USB cable provides a convenient solution for communicating with equipment that require a DB9 connector.
  • Use a DB9 mini gender changer (sold separately) if the fixed hex screws will not mate with the equipment port.
  • Simple installation of USB C to serial adapter using the drivers available for download from Cable Matters.
  • Connect a null modem adapter (sold separately) to directly connect two computers with serial cables.
  • Windows & Mac compatible with the latest OS versions.
  • Some equipment may require additional proprietary software that may limit the OS compatibility.
  • RS-232 compatible USB C serial cable is required for many types of equipment including a CNC Machine, GPS, telescope, Set-top box, Cisco network switch, sewing Machine and more.
Check Stock

DIYmall USB to TTL Serial Cable Adapter FTDI Chipset FT232 USB Cable TTL for Arduino ESP8266 Pack of 1pc

  • FTDI based USB to TTL Serial Cable are designed using the the standard FT232BL chipset.
  • Please note that this cable supports very low power devices-5V..
  • It can work with Raspberry Pi serial console.
  • UART interface IC device which handles all the USB signal and protocols.
  • What you will get is : 1 X USB to TTL serial cable.
Check Stock

USB to TTL Serial 3.3V UART Converter Cable with FTDI Chip Terminated by 6 Way Header Works with Galileo Gen2 Boards/BeagleBone Black/Minnowboard Max and More

  • Moyina USB TTL +3.3V levels (signals only, VCC= +5V) Serial cable is a range of USB to TTL serial UART converter cables featuring FTDI's FT232RL USB....
  • Provides a fast, simple way to connect devices with a TTL level serial interface to USB. Support EEPROM, Vendor ID re-write and Mprog3.5.
  • Provides access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections. RoHS compliant and CE approved.
  • Operating system Compatibility: Windows 10/8/7, Windows Vista, Windows XP, Windows 98, Windows ME, Linux and Mac OS. Please check for details in....
  • The USB side of the cable is USB powered and USB 2.0 full speed compatible, while the other end is a 6 way, 0.1”, Single-In-Line (SIL) pitch gold....
Check Stock

KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 1.5A Output, More Powerful MCU Contoller Board

  • This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins.
  • The USB-to-Serial chip of this board is stable and compatible CP2102.
  • Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor.
  • Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel).
  • Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU.
  • The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
  • How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
Check Stock

Tripp Lite Keyspan High-Speed USB to Serial Adapter, PC & Mac, USB-A to DB9 RS232 Male, 3 Foot / 0.91 Meter Cable, 3-Year Warranty (USA-19HS)

  • Serial adapter allows a serial device to be connected to a USB computer.
  • Plug-and-play convenience:DB9 serial port is seen as a COM port by your computer, and is available for use by any program that accesses COM ports.
  • No need for an external power adapter:draws power directly from your computer via the USB connection.
  • DB9 serial port supports data transfer rates up to 230 Kbps:twice the speed of a standard built-in serial port.
  • LED shows adapter status and data activity at a glance.
Check Stock

Gearmo USB 2.0 RS-232 Serial Adapter with LED Indicators

  • USB TO RS232 SERIAL – 5ft in length serial adapter. Connect legacy DB-9 serial communications devices to a modern computer with USB.
  • EASY TEST - Easy test RS-232 host to device link. With a full LED, dual color display, tester output. This will make testing your connections with ease..
  • COMPATABILITY - With support on multiple OS platforms this makes our USB RS- 232 very versatile. Supported OS platforms are Windows 7, 8, 10, and 11 as well as Linux and MacOS 10.X.
  • WHY Gearmo? Your Trusted Partner based in the USA, Providing Advanced Engineering, Highly Reliable and Superior Built Products to handle the most demanding industries for over 20 years. Reach out to us for CAD, Mechanical Drawings and, Data Sheets..
  • Os compatibility: Windows 7, 8, 10, and Windows 11 as well as Linux and MacOS 10.X.
Check Stock

StarTech.com 4 Port USB to Serial RS232 Adapter - Wall Mount - Din Rail - COM Port Retention - FTDI USB to DB9 RS232 Hub (ICUSB2324I)

  • INDUSTRIAL STRENGTH: Built to withstand harsh environments, this 4 port USB to serial RS232 adapter has a rugged all-metal enclosure for added durability in industrial settings.
  • COM RETENTION CAPABILITIES: For added convenience, this FTDI USB to DB9 RS232 hub features COM retention so COM port assignments are maintained during reboots.
  • PLUG AND PLAY INSTALLATION: This DB9 serial converter is powered by an available USB port / cable so no external power adapter is required.
  • INSTALLATION OPTIONS: This USB serial adapter has integrated wall mount brackets and included DIN Rail clips for versatile mounting options.
Check Stock

Adafruit Feather 32u4 Bluefruit LE [ADA2829]

  • ATmega32u4 clocked at 8 MHz and at 3.3V logic - same chip setup as the Flora.
  • USB native support, built in USB bootloader and serial port debugging - no need for an FTDI-like chip.
  • It can also act like a mouse, keyboard, USB MIDI device, etc..
  • Hardware Serial, hardware I2C, hardware SPI support.
Check Stock