ReviewsServer Rack Screws

Jingchengmei 1U Lightweight Foldable 19 Inch Steel Vertical Rack and Wall Mountable Server Rack Mount (1U35P)

  • NO ASSEMBLY REQUIRED: this 1U vertical rack arrives fully assembled with cage screws and nuts for mounting equipment..
  • W 19.29" x D 2.3" x H 3.54", compatible with Most 19" Rack Mountable Equipment.
  • VERSATILE FUNCTIONALITY: Besides vertically mounting onto wall, this bracket enables your server or networking equipment horizontally under a desk for added versatility. Including almost all screws for assembly onto wood wall, desk or concrete wall..
  • DURABILITY: this 1U vertical rack features a solid steel design. Max Loading Weight Capacity: 35 Pounds.
  • ENVIRONMENTALLY FRIENDLY: this 1U foldable rack is at less volume, lower freight charge, smaller packaging. Easy to carry..
Check Stock

HVAC for Beginners: The Most Updated Guide to Heating, Ventilation, and Air Conditioning Technology | How to Repair and Install Equipment for Residential and Commercial Buildings

  • AxcessAbles RK 16U is an AV rack cabinet designed for standard 19-inch gear. Perfect for organizing server/networking equipment, power amplifiers, microphones, DVD players, DJ gear..
  • Compatible with American 5mm and European 6mm rack mount standards. Screws packs for both are included..
  • Locking 3-inch caster wheels are removable for additional weight load. Side panel install is optional if you need an open-frame server rack for additional airflow as they are none-weight bearing..
  • Front and rear rails. Textured-matte black finish. For gear up to 18-inche deep. Dimensions assembled: 18” x 20” x34.5" with wheels. Weight capacity is 440lbs with wheels and 550lbs without wheels.
  • AxcessAbles RK16U rack is compatible with all AxcessAbles drawers, trays, and panels. And it is also compatible with all standard 19" rack accessories..
Check Stock

StarTech.com M6 Screws and Cage Nuts - 50 Pack - M6 Mounting Screws and Cage Nuts for Server Rack and Cabinet - Silver CABSCREWM6

  • EASY TO USE: This 50 Pack of M6 Mounting Screws and Cage Nuts is used for installing server, network, AV and other rackmount equipment securely into....
  • SIMPLE INSTALLATION: Each pack includes a cage nut installation tool to ensure a fast and simple installation of each cage nut..
  • TAA COMPLIANT: These TAA compliant M6 rack screws and cage nuts adhere to the requirements of the US Federal Trade Agreements Act (TAA), allowing....
  • INCLUDED COMPONENTS: The pack includes 50 rack screws and 50 cage nuts, providing enough mounting hardware to setup any rack you might be working on..
Check Stock

Mofangtech 2U Folding 19 Inches Cold Rolled Steel Wall Mountable Simple Vertical Rack and Networking Euipment Rack Including Hardware for Assembly (2U100)…

  • NO ASSEMBLY REQUIRED: this 2U wall mount rack arrives fully assembled with cage screws and nuts for mounting equipment..
  • VERSATILE FUNCTIONALITY: Besides vertically mounting onto wall, this 2U wall mount rack enables your server or networking equipment horizontally under a desk for added versatility. Including almost all screws for assembly onto wood wall, desk or concrete wall..
  • ENVIRONMENTALLY FRIENDLY: this foldable rack is at less volume, lower freight charge, smaller packaging. Easy to carry..
  • W 19.29" x D 4.05" x H 3.94" compatible with most 19" rack mountable equipment..
  • DURABILITY: this wall mount rack features a solid steel design for ultimate durability. Max Loading Weight Capacity: 44 Pounds.
Check Stock

StarTech.com 8U Wall Mount Patch Panel Bracket - 13.75 inch Deep - 19\ Patch Panel Rack & 1U Server Rack Shelf - Universal Vented Rack Mount Cantilever Tray, Black (CABSHELFV1U)

  • ...and to ensure a safe and sturdy mounting solution & includes wall mounting hardware.
  • Installs onto 16" studs with mounting holes.
  • Product 1: EASY CABLE MANAGEMENT: Built with efficiency in mind, the small wall mount patch panel bracket has rear cable routing access for easy cable organization in your network closet, server room, wiring closet, classroom.
  • Product 2: UNIVERSAL 19'' FIT: This 1U vented server rack mount shelf is designed to fit virtually any 19in server rack and can accommodate an internal depth of 10in (25cm) for your data, IT, networking, or other non-rack mount equipment.
  • Product 2: MAXIMIZE VENTILIATION: The vented shelf plate on the cantilever rack shelf ensures consistent airflow to effectively dissipate heat on servers.
  • it also works great to keep your computer and AV equipment cool in your home, studio, or office space.
  • Product 2: HEAVY-DUTY & DURABLE DESIGN: Constructed with SPCC commercial cold-rolled steel, the sturdy front mounted cabinet shelf ensures long term durability and supports a total weight of 44lbs/22kg making it the perfect rack shelf solution for any environment.
  • Product 2: VERSATILE FUNCTIONALITY: At 10in deep, this fixed rack mount shelf is designed to work with any 19in cabinet or equipment rack.
Check Stock

AxcessAbles RK 16U 19 Inch Cabinet AV Rack Stand with Wheels With Open-Frame Rack Install Option and Removable Wheels For Audio Video DJ Home Theater Network Server Equipment Sound Studio

  • AxcessAbles RK 16U is an AV rack cabinet designed for standard 19-inch gear. Perfect for organizing server/networking equipment, power amplifiers, microphones, DVD players, DJ gear..
  • Compatible with American 5mm and European 6mm rack mount standards. Screws packs for both are included..
  • Locking 3-inch caster wheels are removable for additional weight load. Side panel install is optional if you need an open-frame server rack for additional airflow as they are none-weight bearing..
  • Front and rear rails. Textured-matte black finish. For gear up to 18-inche deep. Dimensions assembled: 18” x 20” x34.5" with wheels. Weight capacity is 440lbs with wheels and 550lbs without wheels.
  • AxcessAbles RK16U rack is compatible with all AxcessAbles drawers, trays, and panels. And it is also compatible with all standard 19" rack accessories..
Check Stock

StarTech.com 2U Vertical Wall Mount Patch Panel Bracket - Steel Rack Mount Bracket w/Hardware for 19

  • VERSATILE FUNCTIONALITY: This multi-use 2U vertical patch panel bracket enables you to mount your server, data, networking or AV equipment vertically on a wall or horizontally under a desk for added versatility..
  • STURDY DESIGN: Constructed to EIA-310 19in rack standards, the black wall mount patch panel bracket features a solid steel design for ultimate durability. The rack can hold up to 125.3lb (56.7kg) to ensure your equipment is secure..
  • NO ASSEMBLY REQUIRED: The open frame, L-shaped rack arrives fully assembled with cage screws for mounting equipment and 1 ½” screws for mounting the rack to wood surfaces. It’s a convenient solution for all your SoHo (small office/home office) rack needs..
  • STANDARDIZED HOLE SIZING: The wall mounting holes on the 2U vertical mountable rack bracket are 16” center to center to provide greater stability and match standard wall studs. It works with most 19” rack mountable equipment for ultimate compatibility..
  • INDUSTRY-LEADING SUPPORT: StarTech.com offers a lifetime warranty and free lifetime technical support on this wall mount patch panel bracket, and has been the choice of IT professionals and businesses for over 30 years..
Check Stock

Rack Mount DIN Rail Bracket

  • High quality cabinet cage nuts and screws.
  • Package includes: cage nuts x 50pcs screws x 50pcs Washers x 50pcs.
  • Fit all square hole racks server rack or cabinet.
Check Stock

AxcessAbles 12U AV Rack Stand | 12 Space Component Rack Cabinet | Removable Side Panels for Open-Frame | 550lb Capacity Four Post Network Server Case| 19-Inch Rack-mountable Cabinet (RK12U)

  • OPEN-FRAME RACK option. Open front and back, 12U spacing rack with vented-side panels for protection. Side panels are none weight-bearing thus can be left off for additional airflow. Powder coat textured-matte black finish. Holds equipment up to 18 inches deep..
  • Rack rails are compatible with American 5mm and European 6mm rack screws.( 5mm and 6mm rack screws are included.) Designed with many functions in mind. Can serve as a stereo rack, av equipment cabinet, media rack, server stand and more...
  • Dimensions Assembled: 18” x 20” x27.5” with wheels. Shipping Weight 39.7lb. Weight Capacity is 440lbs w/ wheels. Remove wheels and increase load capacity to 550lbs..
  • Sturdy 3" caster wheels are preinstalled.
  • 2 wheels are lockable. 1U Blank Panel is included..
  • Assembly Required. This 12U equipment rack is compatible with standard rack drawers, rack accessories. AxcessAbles also carries racks in 8U, 16U, and 22U.
  • as well as family of rack accessory panels and rack drawers..
Check Stock

StarTech.com 19" 24U Server Rack Cabinet - 4-Post Adjustable Depth 2 to 30" Network Equipment Rack Enclosure w/Casters/Cable Management/1U Shelf/Locking Doors and Side Panels (RK2433BKM)

  • SECURE RACK: 19" server rack cabinet w/adjustable mounting depth up to 30", internal depth of 33", height 46.1".
  • FULLY ASSEMBLED WITH CASTERS: Pre-built w/casters & leveling feet to offer maneuverability & stability.
  • 100 Cage nuts/screws, hook & loop tape & 1U shelf provided to easily mount equipment.
  • DESIGN AND VENTILATION: Strong mesh doors and side panels with vented top allow for airflow.
  • 1U height intervals marked for identification.
  • COMPATIBILITY: EIA/ECA-310-E Compliant for server/networking equipment, supporting brands like HPE ProLiant, Dell PowerEdge, and Lenovo ThinkSystem.
  • Specs: 24U 19in Enclosure Cabinet | Mounting Depth 2 to 30in. | 995 lb stationary capacity| 100xM6 cage nuts & screws | 1U vented shelf | 10ft hook and loop tape inc. | Grounding lugs.
Check Stock

WORKDONE 12-Pack - 3.5\ Hard Drive Caddy - Compatible for Dell PowerEdge Selected 14-15th Gen. Servers - with Detailed Setup Manual - Front Sticker Labels - Screwdriver - Strong Tray Screws

  • README FIRST: The same PowerEdge server type can have two different sizes of the drive bay.  Your server HAS TO HAVE 3.5 inches Hot-Plug Drive Bay. This 3.5 inch Drive caddy supports ONLY 3.5-inch hard drives. Check that your PowerEdge Server or Drive Array is LISTED and supported..
  • SUPPORTED 3.5 inch MODELS PowerEdge 15th Generation: R250, T350, R450, T550, R550, R650, R650xs, R750, R750xs, R6515, R6525, R7515, R7525, C6520 enclosure.
  • PowerEdge 14th Generation: R240, R340, R440, R540, R640, R740, R740xd, R740xd2, R6415, R7415, R7425, XC Series appliances XC640-10, XC740xd-12 and C6420/25 enclosure, Precision 3930 Rack and 7920 Rack. Supported ONLY Hot-Plug 3.5-inch Drive Bay models. NOT compatible when your server has a 2.5-inch drive bay.
  • WORKDONE BRIGHT LED: This innovation make hard drive indicator lights brighter. The PowerEdge server backplane has activity LEDs and LED signal lights are transferred special plastic rail to the front of drive caddy. Indicator lights tell important status from the hard drive. Hard drive activity indicator green and hard drive status indicator - green and amber are now cleaner and brighter. (compared typical aftermarket products - green light in the pictures are just an illustration).
Check Stock