ReviewsServo Connector Board

15PCS ShareGoo 150mm Male to Female JR Plug RC Remote Control Servo Extension Lead Wire Cable

  • Connector Type:JR male & Female plug,compatible each other..
  • For RC Car, plane and helicopter servo connection or receiver connection..
  • Servo extension cable, 3 pin female to male connector..
Check Stock

Weytoll 30KG Motor Servo High Torque Metal Gear Digital Servo Waterproof for RC Car Robot Boat with 25T Arm Control Angle 180°

  • 【Motor Servo】- This 30kg servo offers a full range of 180° with metal gears..
  • 【Large Torque】Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60° - 0.17sec/60°, peak stall torque: 29.5kg.cm - 32kg.cm..
  • 【High Quality】- High performance digital standard servo,equipped with strong gears,Dual ball bearings.
  • 【Application 】- Digital servo can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • 【Accessories 】Connector wire length 12.6 inches(32cm),and also send with a 25T metal servo arm.
Check Stock

KEYESTUDIO Mega Plus 2560 R3 Board for Arduino with Type-C USB Cable, 1.5A Output, More Powerful MCU Contoller Board

  • This Mega Plus board can work like the Arduino Mega R3 2560 but it is more powerful and has more pins.
  • The USB-to-Serial chip of this board is stable and compatible CP2102.
  • Up to 5V, 1.5A output, can drive drive high-current devices like servo and motor.
  • Additional SPI communication interface, IIC communication interface, Serial communication interface(4 channel).
  • Serial2 (D17 is RX2, D16 equals to TX2), Serial3 (D15 is RX3, D14 is TX3), D0 and D1 are connected to MCU.
  • The yellow text on black board makes identifying pinsets a breeze. FCC and CE is available.
  • How to use: Search for "keyestudio wiki KS0499" in Google Chrome to get the wiki online tutorial for this product. Technical supports are available at any time!.
Check Stock

20 Pack Servo Extension Cable Safety Connector Clips Lead Wire Lock for RC Products

  • 1. Lock Clips keep Servo Connection stable to avoid a costly crash if a Servo was Un-plugged..
  • 2. Made of Nylon. Lightweight without any burden to RC models..
  • 3. Fit for JR, RC Car, Plane, Helicopter and Drones Servo Extensions.
  • 5. Package List: Wire Lead Connector Clip X20..
Check Stock

BotBrain Robotics Control Board

  • Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
  • Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
  • Holes on side on the side of the board bolt to Merkur parts.
Check Stock

[4-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

[2-Pack] MG996R 55g Metal Gear Torque Digital Servo Motor for Futaba JR RC Helicopter Car Boat Robot

  • The MG996R model compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc..
  • This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy all increase).
  • Power Supply: Through External Adapter. Stable and Shock Proof. Coreless Motor , Metal Gear ..
  • Torque at 6V 12kg/cm, 7.2V 13kg/cm.(Recommended voltage: 5V, current usage: 3A ). Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • Universally Applicable: Micro Servo Motor for 1:10 RC car robot helicopter servo remote controlled aircraft and suitable for most DIY projects..
Check Stock

uxcell RC Products 4 Way Servo Wire Extension Cord 30 Core 168mm 3 Pin in Brown/Red/Orange 2pcs

  • Used for: RC car, RC plane and RC helicopter servo connection or receiver connection..
  • Feature: 4 way,1 male to 3 female cable splitter..
  • Parameter: 30 core, 6.61Inch / 168mm long, 3 pin, pin pitch : 2.54mm..
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

ETMall 6PCS MG996R Servo Motor Metal Gear Servo Motor Torque Digital Servo Motor High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Compatible Arduino Raspberry Pi Project

  • WHY CHOOSE IT: This MG996R Servo motor which updated from SG90 and MG90S micro servo motor. (the Speed, Tension and Accuracy allincrease).This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
  • WIDE APPLICATIONS: The MG996R Servo model Good performance digital standard servo, compliant with most standard receiver connector,for Futaba, Hitec, Sanwa, GWS etc. Which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • ELECTRICAL SPECIFICATION: The MG996R Servo Torque at 4.8V 13.5kg/cm, 6V 15.2kg/cm. Positioning speed at 4.8V without load 0.17s / 60 degrees.
  • 6.0V without load 0.15s / 60 degrees. Recommended voltage: 5V, current use: 3A..
  • STABLEPERFORMANCE:Stable and shock-proof iron core motor, metal gears, power supply through external adapter..
  • Tips: If you’re not completely satisfied for any reason, simply return it or contact us.Your 100% satisfaction is our goal..
Check Stock

uxcell 10pcs Adjustable Pushrod Connector Linkage Stopper 1.2mm x L450mm (17.7 Inch) Steel Z Push Rods Parts

  • Package Content: 10 x Steel Z Push Rods, 10 x Adjustable Pushrod Connector, 1 x Hex Wrench..
  • Push Rods Diameter: 1.2mm/0.047", Push Rods Length: 450mm/17.7".
  • Pushrod Connector: Diameter of the Hole:1.2mm, Fit Pushrods 0.8-1.2mm..
  • Pushrod, easy to bend to fit the angles that you need, compatible with the micro servos and projects..
  • The Steel Push Rods Parts are used for connection between servo and servo horn..
  • Metal Quick Adjuster comes with a hex wrench, easy to install..
Check Stock