ReviewsServo Control

Globact RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)

  • 【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
  • 【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
  • 【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
  • 【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
  • 【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.
Check Stock

3pcs M0090 9G Metal Gear Mini Servos 1.9KG Torque RC Servo Analog Servo Motor Micro Servo for RC Model Car Robot Flight Controller Toy Product

  • ✔️【High Speed Servo】Torque: 1.7kg-cm/4.8V.
  • 0.08sec/60°/6.0V Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec.
  • ✔️【High performance】rc helicopter servo.Precision metal gears forms a strong and solid framework..
  • ✔️【High-strength】M0090 RC Servo Suitable for use in planes, helis, cars and robots. Mini Analog Servo M0090 13g/1.9kg-cm/0.08sec. Interface Type: JR .
  • ✔️【Metal Gear Servo Motor】Over-spec refined design out performs ordinary micro size servo.Weight:13g / 0.5oz (not include wires weight).
  • Dimension:22.4*12.5*22.8mm³ / 0.9*0.5*0.9in³.
  • ✔️【Good Quality Servo】Strict production and quality control of plastic components.High reliability,good stability,strong adaptability, Low noise,small vibration,smooth operation long life.
Check Stock

AEDIKO MG996R Servo Motor Control 180 Angle Metal Gear Servo Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter 2-Pack (MG996)

  • Positioning Speed Without Load: 0.17s / 60 degrees 4.8V.
  • Compliant with Futaba, Hitec, Sanwa, GWS, etc ..
  • Latest Version: MG996R Servo Motor Which Updated from SG90 and MG90S Micro Servo Motor,Made of High Precision Potentiometer and High Resolution Digital Chip to Ensure Stable Performance and Solve Problems:Unsuitable R / C and Slow Response Time.
  • Gear Type: All Metal Gear RC Servo Can Control the Angle Range from 0 to 180, with Precise Control and Gears are Consistent,Which Can Rotate 360 Degrees When Power Off.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys and Arduino Experiments.
Check Stock

Dilwe RC Car Servo,Durable Plastic Gear Servo for WLtoys 12428 / 12427 1/12 RC Car Upgrade Spare Parts

  • ✔20KG Large Torque - 20KG Servo Motor 20.5 kg.cm(4.8V) - 22.8 kg.cm(298.5 oz/in)(7.2V)..
  • ✔270 Degree Rotation - Pulse width signal of 20kg servo motor from 500 to 2500 μsec, well controlled from 0 to 270 degrees. When the input signal is 500usec, the angle is 0 degrees, and at 2500 μsec, the angle is 270 degrees..
  • ✔High Precision - DS3218 20kg digital servo accuracy with precision potentiometers. Excellent linearity, precision control, high quality leads and center nicely..
  • ✔High Rotation Support Waterproof - Waterproof performance: IP66. Metal servo motor accuracy and linearity have been greatly improved! Perfect satisfy the needs of making robots. Also for cars, boats, vehicles and remote control toys and so on..
  • ✔Dimensions - 40*20*40.5mm(1.58*0.79*1.60in).
  • Weight - 56g±5%(2oz±5%). Operating voltage range: 4.8-7.2V.
Check Stock

Miuzei 10 Pcs SG90 9G Micro Servo Motor Kit for RC Robot Arm/Hand/Walking Helicopter Car Boat Control with Cable, Mini Small Servos for Arduino Project

  • Application Fields: Miuzei SG90 9G Servo Motor Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys and Arduino Experiments.
  • Interface Type: This SG90 Servo Compatible With JR & Futaba Interface. Miuzei Micro Servo 9g no Load Running Speed: 0.09±0.01 sec/60° at 4.8V.
  • Miuzei Micro Servo Motor Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW Signal, Then it Will Be Work Normally.
  • How to Reach 180 degree -- Miuzei SG90 9g Servo Motor Need to Meet 4.8V Power Supply Voltage and 2500usec Pulse Signal, the Angle of Rotation.
Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

  • Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
  • Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
  • 2.You should connect higher power supply for higher-power servo.
  • 3.Make sure servo are connected properly, otherwise they will not move..
  • Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
  • Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
  • Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
  • Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..
Check Stock

DIYmall HJ Digital RC Servo Tester ESC Consistency Tester Speed Controller for RC Helicopter Airplane Car Motor Throttle Display

  • 1 X HJ Digital Servo Tester / ESC Consistency Tester.
  • 4CH tester servo: It can control 4 servos at the same time.
  • 50H analog servo signal cycle 20us frequency 50Hz,125H digital the steering gear a signal cycle 8us frequency 125Hz.
  • 250H Digital Servo signal cycle 4us frequency 250Hz.
Check Stock

Weytoll 30KG Motor Servo High Torque Metal Gear Digital Servo Waterproof for RC Car Robot Boat with 25T Arm Control Angle 180°

  • 【Motor Servo】- This 30kg servo offers a full range of 180° with metal gears..
  • 【Large Torque】Operat Voltage: 4.8V - 7.4V, no load speed: 0.24sec/60° - 0.17sec/60°, peak stall torque: 29.5kg.cm - 32kg.cm..
  • 【High Quality】- High performance digital standard servo,equipped with strong gears,Dual ball bearings.
  • 【Application 】- Digital servo can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • 【Accessories 】Connector wire length 12.6 inches(32cm),and also send with a 25T metal servo arm.
Check Stock

Favordrory 30 Pieces 3-Pin Extension Cable Cord Male to Female Lead Wire Connectors for Servo Extension Connection Control Board Remote Control Parts, 5 Sizes

  • Size: 5 different lengths of 10 cm/ 3.95 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch, 50 cm/ 19.7 inch and 60 cm/ 23.6 inch, each length has 6 pieces servo extension cords.
  • Quantity: this package includes 30 pieces of female to male servo extension cable, enough for you to use, different length can meet your different needs.
  • Good connector: the connector of these wires are Futaba style connector with 3 pins, and it has an angle, in case you will install incorrectly, very convenient.
  • Feature: Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
  • Widely Application: these servo extension leads can be applied for Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
Check Stock

Servo, Metal Gear Servo, Resistance RC Car Accessory Car Part

  • High-Precision ManufacturingHigh-precision metal gears, necessary practical upgrade parts and accessories, used to replace old and damaged RC car servos..
  • Simple and Convenient InstallationThis metal gear servo is simple and convenient to install, and will not cause additional burden to your RC car..
  • Using Durable and SolidSmall digital servo, durable and reliable in use, and long service life..
  • Exquisite WorkmanshipThe RC servo adopts exquisite workmanship, which helps to better control your remote control car..
  • Stable PerformanceThe RC high-quality server weighs 17g and is specially designed for RC model cars. It is used to maintain your car and make your car performance more stable..
Check Stock

Hosyond 10 Pack Servo Motors SG90 9G Micro Servo for RC Robot Helicopter Airplane Boat Remote Control Toys, Servo for Arduino Project, Blue

  • [Applications] SG90 9G servo motor, compatible with RC helicopters, micro robots, robot arm and ships etc. Support various remote control toys and Arduino project.
  • [Interface type] This SG90 servo is compatible with JR & Futaba interface.
  • [Operating speed] 0.12 second/ 60degree ( 4.8V no load), 0.1 second / 60degree ( 6.0V no load), Max rotation angle:180 degrees.
  • [Reminder] The starting current of the analog servo motor must be greater than 1A. SG90 Servo is an analog servo and needs to continuously provide PMW signal to work normally.
Check Stock