ReviewsServo Signal Generator Board

BotBrain Robotics Control Board

Basic Stamp microprocessor, the board uses sensor inputs, a program, and servo outputs to operate a robot using the Parallax pBasic language.
Features include 8 sensor inputs and 5 servo outputs, all with polarized connectors as well as a built-in piezo "speaker".
Holes on side on the side of the board bolt to Merkur parts.

Check Stock

9 Pieces JST Y Connector 3 Pin JST Plug Splitters Servo Extension JST Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car or Airplanes (Mixed Style)

Package includes: you will 9 pieces of servo extension cord, 3 pieces of male JST to female JR (Futaba) cable, 3 pieces of male to 2 female Y harness, 3 pieces of male to 3 female Y harness.
Abundant quantity and diverse styles that can meet your various needs.
Appropriate sizes: the servo extension cord measures approx. 15 cm/ 5.9 inches in length, universal size for your use, the color is white, black and red.
Extensive usages: these JST male to female are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
Well made: JST connector is made of quality PVC material, with good insulation and flame retardant.
The interior is made of tinned copper, which has a good transmission and low resistance.
Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control unit, which is male to female.

Check Stock

10 pcs 3.93inch JR Style Servo Extension Cable Lead Wire - 3-Pin JR Plug Male to Male RC Servo Wire Extension Cord

3-Pin JR plug male to male connector servo extension lead wire cable..
There is a 3 pin JST RE connector on each end. This is a simple 3 wire cable. Ideal for jumping from board to board, or something else..
Practical range: For Airplane, Helicopter, Quad co-pterter , Multi-coater RC car servo connection or receiver connection..
Packaging quantity ：10 Pcs * 10cm JR 3pin male to male plug servo extension cables wires cords leads..

Check Stock

15 Pcs Servo Extension Cable JST Y Connector 3 Pin JST Plug Splitters Male to Female Servo Adapter JST Extension Servo Wire Connector Compatible with RC JR Futaba RC Car or Airplanes, 3 Styles

You Will Get: the package comes with 15 pieces of servo extension cables, including 5 pieces of male JST to female JR (Futaba) cable, 5 pieces of male to 2 female Y harness, 5 pieces of male to 3 female Y harness, sufficient quantities and multiple styles can satisfy your different using needs.
Proper Size: the servo connector is about 15 cm/ 5.9 inches in length, suitable size for your to use, with colors of white, black and red.
Wide Application: these JST plug splitters are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also suitable for remote control car, RC car and so on, providing a lot of usages for you.
Nice Craftmanship: the JST plug connector is made of quality PVC material, which has good insulation and flame retardant, and the interior is made of tinned copper, featured a good transmission and low resistance performance, you can rest assured to use it.
Practical Function: the servo wire connector can be applied for jumping from board to board, or nice to control panel cable remote control part that is male to female.

Check Stock

MakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano

Note: The Raspberry Pi and Servo in the photo are not included. User Manual: Please get the link from the operation guide below.
Note: 1.If you only connect 5V power supply to USB interface, servo cannot be driven.
2.You should connect higher power supply for higher-power servo.
3.Make sure servo are connected properly, otherwise they will not move..
Servo Motor Driver: You may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you..
Raspberry Pi connectivity, compatible with Raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano..
Up to 16-Channel servo/PWM outputs, 12-bit resolution for each channel (4096 scales).
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal..

Check Stock

Frequency Generator, DROK DC 3.3V-30V 5-30mA 1Hz-150kHz Adjustable Output PWM Pulse Duty Cycle Square Wave Function Signal Generator Module

PARAMETER --- working voltage range 3.3V-30V.
APPLICATION --- as square wave signal generator for experimental development.
as square wave signal generator for motor driver.
as adjustable pulse generator for PWM dimming, speed regulating, etc..
DISPLAY--- clear LCD displays frequency & duty ratio value..
MODE --- 2 modes, normal mode & accurate mode..
PWM output, can set frequency & duty cycle separately.
duty cycle upper and lower bounds adjustable.

Check Stock

Rigol DP832A (3 Channels) Programmable DC Power Supply

25 MHz, 2 ch, 200MS/s Waveform Generator with deep memory arbitrary waveform capability and SiFi signal fidelity technology.
DG1022Z 25 MHz Arbitrary Function Generator with second channel.
SiFi (Signal Fidelity) for 100% waveform replication.
2Mpts or 8Mpts/CH(std.), 16Mpts/CH (opt.) arbitrary waveform length.
Standard 2 full functional independent channels.

Check Stock

Signal Generator, DROK DC 3.3-30V Function Generator 5-30mA LCD Display PWM Pulse Frequency Duty Cycle Rectangular Wave Square Wave Signal Generator

PARAMETER ---- operating voltage range DC 3.3v~30v.
APPLICATION ---- as square wave signal generator for experimental development.
as square wave signal generator for motor driver.
as pulse generator, control related circuits (PWM dimming, speed regulating)..
SERIAL COMMUNICATION ---- support serial communication, TTL level..
DATA AUTO STORAGE ---- all parameters will be saved automatically after setting and therefore won't lose when power off..
OTHER FEATURES ---- with LCD display to display frequency and duty cycle value.
PWM output, can set frequency and duty cycle separately by buttons.
frequency value is divided into 4 range and switched automatically, with high precision..

Check Stock

HiLetgo 5pcs Nano I/O Expansion Sensor Shield for Arduino UNO R1 Nano 3.0 Duemilanove 2009

14 I/O Pin (servo type with GND, power and signal).

Check Stock

Miuzei 20KG Servo Motor High Torque Digital Servo Metal Waterproof Servo for R/C Car Robot, DS3218 Control Angle 270°

DS3218 20kg digital servo,accuracy with precision potentiometers, high quality leads and center nicely..
High torque steering servo for robot arm,boats,vehicles and remote control toys..
Size:40*20*40.5mm Weight: 60g Operating voltage range(4.8-6.8V) Dead band width:3 μsec.
Stall torque (at locked):18 kg-cm(5V)/21.5 kg-cm(6.8V) Waterproof performance: IP66.
Please Note: To use a 20kg steering gear, you need to ensure the correct line connection, provide 500~2500usec pulse signal, meet the power supply voltage of 4.8V~6.8V.
when the input signal reaches 2500usec, the angle rotates to 270 degrees).

Check Stock

UNI-T UTG932 + UTP1306, Function Generator and Switching DC Power Supply Kit

Mini palm-sized signal generator Palm-sized signal generator, your personal signal output source, bring you a different sense of experience.
60 MHz MAX. OUTPUT FREQUENCY 200 MSa/s SAMPLE RATE 14 bits VERTICAL RESOLUTION 2 CHANNELS - ARBITRARY WAVE LENGT.
Standard 2 Channel, multiple waveform signals Maximum output frequency 60MHz, dual channel, multiple waveform signals: sine wave, square, ramp, pulse, noise, DC, arbitrary waveform.
Modulation function Easy-to-use modulation types: AM, FM, PM, FSK Built-in 24 arbitrary waveforms 24 kinds of non-volatile digital arbitrary waveform storage.
UTG932E 30 MHz 200 MSa/s 14-bit 2 UTG962E 60 MHz 200 MSa/s 14-bit 2.

Check Stock