ReviewsServo System Cable

Differential Amplifiers EL5172ISZ 200MHZ DIF REC (50 pieces)

Power supply EMI filter is a kind of reactance-type low-pass filter, installed at the power supply input of electronic equipment..
It can inhibit noise transmitted through grid power cable, and can inhibit high-frequency interference signals generated by the electronic device itself..
High quality imported components provide obvious filtering effect..
EMI has become a must have device installed in electronic equipment..
Widely used for precision measuring instruments, building automation, precision machinery, elevator lifting equipment, automated system, calculator inverter office equipment, servo system inverter equipment, frequency conversion equipment, lighting equip.

Check Stock

CenryKay MG90S Servo, Helicopter QC Module 9G Servo Motor Metal Gear Micro Servo Motor Smart Robot Helicopter Plane Boat for Arduino Raspberry Pi Project(6PCS)

Metal gear servo 9g is equivalent to the metal tooth plate of SG90. The installation size is slightly different from that of SG90. The servo system is more comfortable than cheap plastic gears..
Servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds but smaller..
This MG90S Micro Servo has metal gears for added strength and durability.It comes with a 3 horns (arms) and hardware..
The servo motors weight is 13.6g, suitable for 450 electric straight, swash plate steering gear, fixed-wing RC airplane..
The package included 6pcs MG90S Micro Servo, each MG90S come with one motor and three servo arms and three screws..

Check Stock

40 Sets Servo Plug Male Female Connector Crimp Pin Cable Kit, Servo Extension Cord Wire Kits Compatible with JST SYP Futaba for RC Hitec Spektrum Model, Model Receiver Battery ESC Connection

Items Sent to You: there are 20 sets of servo male, 20 sets of female connector, 20 sets of red male SYP connectors, 20 sets of female SYP connectors, 1 piece of 3 meters long 22AWG cables and 1 piece of tweezers in the package.
A complete combination to serve you for a long time.
Reliable Material Selection: the servo wire connector is mainly made of multi core tinned copper, which is strong and can endure enough current.
Besides, the cable is 3 meters long 3P wires, and 22AWG, nice to provide you with a satisfactory using experience.
Applicable for: the black connector compatible with Futaba and JR connectors, ideal for servo extensions DIY, repairing servo connectors.
And the red connector compatible with JST SYP connectors, ideal for power cable.
Notable Size Details: the servo connector is 2.54 mm pin spacing and the red connector is 2.5 mm pin spacing, can be widely applied for plugging in various normal parts of remote control cars, multi rotor quadrotor helicopters, aircraft and cars.
Thoughtful Accessories: we provide you with 1 piece of tweezers for easy operation, also each set includes connector housing, protective connector housing and crimp pin connector, efficiently satisfying your various decorating needs through one time purchase.

Check Stock

Globact RC Digital Servo Tester/ESC Consistency Tester for RC Helicopter Airplane Car(Servo Tester,ESC Consistency Tester,RC Helicopter Tester Tool)

【High Srecision】The RC ESC tester used to compare the performance steering gear control of the steering servo output signal can be accurate to 2us (1 milliseconds = 1000 microseconds).
【Button The Select】 (Note: the key switch function, circulation patterns) 1. S-1 manual mode (Manual) 2.S-2-bit mode (Neutral) 3.S-3 automatic mode (Automatic).
【Keys Pulse Width】1. 50H analog servo signal cycle 20us frequency 50Hz, 2. 125H digital the steering gear a signal cycle 8us frequency 125Hz,3. 250H Digital Servo signal cycle 4us frequency 250Hz.
【Powerful Testing Function】RC plane servo tester can test the steering gear is able to respond to subtle changes With PPM signal test function in the display.
【How To Use】Digital or analog signal button selects the corresponding servo system and then plugs into the steering servo to avoid damage to the steering servo.

Check Stock

15 Pieces Servo Extension Cables Servo Extension Male to Female RC Servo Extension Cord Wire Cable Compatible with RC JR Futaba RC Car Airplanes (3.9 Inch,5.9 Inch,11.8 Inch,19.7 Inch,23.6 Inch)

Wide application: these servo extension s are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, also nice for remote control car, RC car and more.
Appropriate sizes: the servo extension cord measures approx. 3.9 Inch, 5.9 Inch, 11.8 Inch, 19.7 Inch, 23.6 Inch in length, different size for your use, the color is black and red.
Package includes: this package includes 15 pieces of male to female servo extension cables, enough quantity for you to use and replacement, providing more convenience for you.
Feature: this male to female servo extension cord featured with female connector on one side, and male connector on the other side, can be connected to the receiving set and steering engine.
Useful function: the servo extension wire is suitable for jumping from board to board, or can be applied to control panel cable remote control, which is male to female.

Check Stock

FEETECH 35KG Servo Motors FT5330M High Torque RC Servo Full Metal Gear Digital Servo,Aluminium Case, Control Angle 180° for Scx24,1/8 1/10 RC Cars,TRAXXS x4, Baja, RC4WD, GTR and More

BRAND SERVO-FEETECH 35KG digital rc servo, high sensitivity, stable and low-noise. High quality PA aluminum case, more sturdy. Hard iron shaft, provide higher stability..
EXCELLENT SERVO PERFORMANCE-High precise upgrade metal gear, with better accuracy and longer service life.The output torque exceeds the overload torque, lasts 8S, or the temperature over 70 ℃, the steering gear will automatically stop the output torque. The overload torque can be modified..
UPGRAD SERVO-Upgraded high torque rc servo, high rotation – well-controlled 180° (at 500→2500μsec) large steering angle, when the power is stopped, it can rotate 360 degrees. Dead width ≤ 4 μsec. Durable and reliable. React quickly and accurately. No stuck problem..
MATCHING SERVO ACCESSORIES-This mini micro servo is equipped with metal mount and servo horn, replaces the original plastic accessories. No need to order accessories with more trouble..
WIDE-APPLICATION-Perfect for Axial scx24, 1/8 and 1/10 scale RC robots, trucks, off-road vehicles, robotic arms, and any application that uses a standard servo system. The servo size is 55X20x43mm..

Check Stock

15PCS ShareGoo 150mm Male to Female JR Plug RC Remote Control Servo Extension Lead Wire Cable

Connector Type：JR male & Female plug,compatible each other..
For RC Car, plane and helicopter servo connection or receiver connection..
Servo extension cable, 3 pin female to male connector..

Check Stock

TOPMAO 10 Pack A6BAT PLC Lithium Battery 3.6V for Mitsubishi Servo A6bat ER17330V FANUC CNC System

Product ID: A6BAT, ER17330V/3.6V, ER17330V.
Cable Length : 160mm, 2 wire 2-pin connector.
Other applications: Alarm system, PLC memory backup power supply, CNC system, servo motors, machine tools, instruments, special electronic equipment, etc..

Check Stock

Metal Servo Stand Mount, RCPLAGA RC Servo Stand Mount Part for 1/10 RC Crawler Car AXial SCX10 II 90046 90047 Axle Upgrade Parts (Black)

【FIT FOR】: RC Servo Stand Mount Part are suitable for 1/10 SCX10 II 90046 90047 RC crawler car. It is a good choice to upgrade your RC car..
【PREMIUM MATERIAL】: The Metal Servo Stand Mount Part is made of high-quality metal, which has strong wear resistance, corrosion resistance, no rust, and durability..
【EASY TO USE】:The 1/10 Metal Servo Stand Mount is attached with screws, which is easy to install and helps to install the steering gear on the front axle..
【Exquisite ACCESSORIES】: Exquisite craftsmanship and excellent quality, increase rigidity, prevent deformation, and help extend the service life of the servo system..
【PACKAGE LIST】 :1 x upgrade metal servo stand mount,1 x Bag of Screw.

Check Stock

Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control

100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
Mini servo SG90 is tiny and lightweight with high output power..
SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system..

Check Stock

Liyeehao 1/10 Servo Stand Mount, RC Servo Stand Mount, Assemble Wear Resistance RC Accessory for RC Car Easy to Install Replacement

The servo stand mount can be firmly assembled together without any other attachment, very easy to install and does not take much time..
Superb craftsmanship and superior quality enable to increase rigidity and prevent distortion, help extend the service time of servo system..
Servo stand mount with steering link rod, fit for AXIAL SCX10 II 90046 1/10 RC car..
Servo stand mount is made of high quality aluminum alloy material, steering link rod is mainly made of high quality metal, strong wear resistance, corrosion resistance, no rust and durability..
Wonderful replacement for the old or broken one, directly fitment..

Check Stock