ReviewsServo To Ttl Board

1pcs 1-Bit AC 220V Optocoupler Isolation Module

  • Output TTL level can be detected with the microcontroller. The power supply can be 3-5V.
  • the PLC input terminal of the PLC COM power supply 24V input termination of the board signal output OUT, optocoupler board GND power negative.
  • When the power module in the power of the board after the white wire frame can not touch any device .. because it is high voltage. Note the safety of electricity.
Check Stock

DTECH USB to TTL Serial 3.3V Adapter Cable TX RX Signal 4 Pin 0.1 inch Pitch Female Socket PL2303 Prolific Chip Windows 10 8 7 XP Vista (6ft, Black)

  • 6 ft USB to TTL serial adapter (with 4 pin 0.1” pitch female header socket) connects devices with 3.3 V logic level UART signals interface to a laptop via USB port.
  • A genuine PL2303TA chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet USB to TTL serial cable 3V3 (4 way output flying leads ) provides access to UART (transmit) Tx, (receive) Rx, VCC (5V) and GND.
  • PL2303 Prolific chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 4 pin 3.3V USB to TTL converter cord Compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE.
  • ideal USB 2.0 debug cord for Vendor ID re-write, router, GPS, set top box, transmitter, flash firmware on hard drive, etc..
Check Stock

Doesbot GRBL 1.1 A4988 Control Board CNC Controller Router CNC Engraving Machine Control Board 3018 3 Axis USB Control Laser Board Corexy Open Source with External Driver Interface

  • Input voltage (board power supply): 12V to 24V.
  • Support 12V, 5V with TTL and without TTL laser.
  • Support external Offline Controller(Optional).
Check Stock

DSD TECH USB to TTL Serial Adapter with FTDI FT232RL Chip Compatible with Windows 10, 8, 7 and Mac OS X

  • With this USB to TTL adapter, you can establish communication with your board/MCU through your computer. Maximum transmission speed up to 3Mbps.
  • The main chip is FT232RL from FTDI ,High stability. LED indicator for TX,RX,Power,It is very useful when you are debugging or downloading..
  • Support VCC output 3.3V and 5V, switch by jumper..
  • Works with Windows 10, 7(32/64bit) Vista 2008, XP, 2003,Mac Etc..
  • WARRANTY:We back this FDTD USB to TTL Converter with 12 months warranty.If you meet any question, Please contact us, We will fix your issue within 24 hours..
Check Stock

KEYESTUDIO 16-Channel 12-bit Servo Motor Driver Board I2C Interface for Arduino

  • This expansion board can directly stack on the controller R3 board and can drive up to 16 servos.
  • Uses I2C input, just occupy A4 and A5 interface on the control board.
  • Contains PCB double sided holes, can direct to solder with components to build up prototyping circuits.
  • Servo power supply independent V + input up to 6V.
  • How to use: Search for "keyestudio wiki KS0258" in Google Chrome to get the wiki online tutorial for this product..
Check Stock

Arduino Uno 3 Ultimate Starter Kit Includes 12 Circuit Learning Guide

  • This is the ultimate Arduino Uno kit enough to get you started with hundreds of arduino projects.
  • Bread Board — Holder — Jumper Wires — USB Cable — LEDs — DC Motor — Small Servo — Relay.
  • Includes a total of over 190 electronic parts and components.
Check Stock

sb components Motor Driver Board for The BBC Micro bit 2 Channel DC Motors and 3 Channel Servos Motors Motor Driver for Micro bit BBC microbit Motor Driver Board

  • micro:bit edge connector, directly pluggable.
  • 2x DC motor interfaces, 3x servo interfaces.
  • Integrates 5V regulator, up to 3A output current.
  • Onboard multi connector options for DC motors in different specifications, onboard standard servo headers.
Check Stock

Canon EOS 6D Mark II DSLR Camera + Canon EF 24-105mm f/4L is II USM Lens + Fully Dedicated TTL Flash + 64Gb SDXC Card + 57 Inch Monopod + FB-150 Flash Bracket + Backpack Case (21 Items kit)

  • ...with 1-year Seller Warranty and includes:.
  • Canon EOS 6D Mark II - 26.2MP Full-Frame CMOS Sensor - DIGIC 7 Image Processor - 45-Point All-Cross Type AF System - Full HD Video at 60 fps.
  • Digital IS - 3" 1.04m-Dot Vari-Angle Touchscreen LCD - Dual Pixel CMOS AF and Movie Servo AF - Native ISO 40000, Expanded to ISO 102400 - 6.5 fps Shooting.
  • Time-Lapse & HDR Movie - Built-In GPS, Bluetooth, & Wi-Fi w/ NFC. Optical viewfinder offers approximately 98% coverage of the frame and has a magnification of 0.71x..
  • Canon EF 24-105mm f/4L IS II USM Lens - EF-Mount L-Series Lens/Full-Frame Format - Aperture Range: f/4 to 22 - Four GMo Aspherical Elements - Air Sphere Coating - Ring-Type Ultrasonic Motor AF System - Optical Image Stabilization - Internal Focus.
  • Full-Time MF Override - Zoom Lock Switch.
  • Fluorine Coating - Dust- and Water-Resistant Construction - Rounded 10-Blade Diaphragm. Constant f/4 maximum aperture offers consistent performance and light transmission throughout the zoom range..
  • SanDisk 64GB Ultra Class 10 SDXC UHS-I Memory Card - Great choice for compact to mid-range point and shoot camera - Twice As Fast A....
Check Stock

Canon EOS 6D Mark II DSLR Camera + Canon EF 24-105mm f/4L is II USM Lens + Fully Dedicated TTL Flash + 64Gb SDXC Card + 57 Inch Monopod + FB-150 Flash Bracket + Backpack Case (21 Items kit) (Renewed)

  • ...with 1-year Seller Warranty and includes:.
  • Canon EOS 6D Mark II - 26.2MP Full-Frame CMOS Sensor - DIGIC 7 Image Processor - 45-Point All-Cross Type AF System - Full HD Video at 60 fps.
  • Digital IS - 3" 1.04m-Dot Vari-Angle Touchscreen LCD - Dual Pixel CMOS AF and Movie Servo AF - Native ISO 40000, Expanded to ISO 102400 - 6.5 fps Shooting.
  • Time-Lapse & HDR Movie - Built-In GPS, Bluetooth, & Wi-Fi w/ NFC. Optical viewfinder offers approximately 98% coverage of the frame and has a magnification of 0.71x..
  • Canon EF 24-105mm f/4L IS II USM Lens - EF-Mount L-Series Lens/Full-Frame Format - Aperture Range: f/4 to 22 - Four GMo Aspherical Elements - Air Sphere Coating - Ring-Type Ultrasonic Motor AF System - Optical Image Stabilization - Internal Focus.
  • Full-Time MF Override - Zoom Lock Switch.
  • Fluorine Coating - Dust- and Water-Resistant Construction - Rounded 10-Blade Diaphragm. Constant f/4 maximum aperture offers consistent performance and light transmission throughout the zoom range..
  • SanDisk 64GB Ultra Class 10 SDXC UHS-I Memory Card - Great choice for compact to mid-range point and shoot camera - Twice As Fast A....
Check Stock

MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard

  • MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
  • Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
  • Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
  • Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
  • Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....
Check Stock

Godox AD200Pro Godox AD200 PRO Outdoor Speedlite,200ws TTL HSS 1/8000s 2.4G Pocket Flash Strobe Monolight with 2900mAh Lithium Battery,0.01-1.8s Recycling, 500 Full Power Flashes,Bare Bulb Flash Head

  • ...e compensation. 1/8000s high-speed sync, first curtain sync, second curtain sync, modeling lamp, manual flash, multi flash, Multi Controls the Stroboscopic Rate up to 90 Times.
  • Built-in Godox 2.4G wireless X system,Use Godox 2.4G wireless X system ,Godox AD200Pro Speedlite Studio Monolight is compatible with Nikon I-TTL, Canon E-TTL, Sony TTL, Fujifilm TTL, Olympus TTL, Panasonic TTL,Pentax TTL. With Master＆Slave Function, Godox AD200Pro flash Monolight Can be Used in Combination with Godox TTL Camera Flashes, TTL Outdoor Flashes, etc.
  • 200Ws, with Bare bulb flash head,GN60(m ISO 100, with AD-S2 standard reflector, @28mm), with Speedlite flash head,GN52 (m ISO 10, @35mm). Stable color temperature at 5600° ±100°K over the entire power range. Professional lithium battery pack has large capacity(14.4V/2900mAh) to provide 500 full power flashes and 0.01-1.8s fast recycling.
  • Use Godox 2.4G wireless X system to achieve TTL control or use Godox TTL wireless flash trigger X1 /Xpro/ X2 to wirelessly control functions, wireless adjust flash's power levels, sound beep, as well as triggering the flash. There are also 3.5mm sync cord jack and wireless control port to achieve multiple triggering methods.
Check Stock