ReviewsServo To Uart Board

Geniatech XPI-3128 Single Board Computer,Embedded Computer Module,Development Board ,Rockchip RK3128 Quad Core Cortex-A7 8GB WiFi ,Card-Sized High Performance Board

  • 85mm*56mm, Credit-card-sized High Performance Board.
  • 4*USB HOST, 1*HDMI Out, 1*Micro USB, 1*UART, 1*GPIO interface, WiFi and 100M LAN interface,Support Micro SD card.
  • Rockchip RK3128 with Quad-core Cortex-A7 up to 1.2GHz.
  • 40 Pin header enables hardware re-use by maintaining compatible alternate pin functions like I2S, I2C, PWM, UART, and GPIO. Form-factor compatible with Raspberry Pi 3 for easy migration..
  • Form Factor & GPIO Compatibility with Raspberry Pi for Maximum Re-usability.
Check Stock

XISAOK UART Serial MP3 Music Player Module with Speaker Monaural Amplifier Board for Arduino MP3 Music Player Module

  • ㊥ Our product design is unique, not only beautiful but also practical..
  • ㊥ The module is a kind of simple MP3 player device which is based on a high-quality MP3 audio chip. It can support 8k Hz ~ 48k Hz sampling frequency....
  • ㊥ There is a TF card socket on board, so you can plug the micro SD card that stores audio files. MCU can control the MP3 playback state by sending....
  • ㊥ UART port, such as switch songs, change the volume and play mode and so on. You can also debug the module via USB to UART module. It is compatible....
  • ㊥ Our Brand is dedicated to provide high standard products,we have confidence in our products and provide after sale support,if you have products....
Check Stock

6Pcs ShareGoo JR Style Servo Splitter Cable, 2.75' Servo 1 Male to 2 Female JR Y Harness Y Cable Extension Wire for RC Models Car Airplane Helicopter Drone Boat

  • Used for RC cars trucks airplanes helicopters rc boat servo connection, receiver connection and flight control board..
  • This servo Y-cable allows you to control two servos with one radio channel..
  • Material: 22AWG silicone wire.Wire Length: 7CM/2.75".
  • 3Pin wire cable.Male JR plug to 2 Female JR plug Y Harness cable..
  • Pack of 6 JR style servo splitter cable,unique design, professional quality JR style connectors..
Check Stock

Creality 3D Printer Part Limit Switch with Separate Package CNC for RAMPS 1.4 RepRap 3D Printer CR-10 10S,S4,S5,Ender 3/Ender 3 Pro/Ender 3 V2/Ender 5 (Pack of 3)

  • 1.Upgrade the firmware by SD card. It is easy and convenient to operate.This display board has higher compatibility. Users can select two work modes,they are UART serial port screen mode and 12864 screen mode..
  • 2.Serial port screen mode supports two printing modes: SD card and U disk..
  • 3.Reserve WIFI port, and WIFI function is realized by external WIFI module.
  • 4.Reserve the extension port of filament breaking detection (FIL-DET).
  • Reserve the extension port of automatic shutdown after printing (PS-ON).
  • 5.2 sets of UART serial port extension ports are reserved for DIY use..
Check Stock

DTECH FTDI USB to TTL Serial 5V Adapter Cable 6 Pin 0.1 inch Pitch Female Socket Header UART IC FT232RL Chip Windows 10 8 7 Linux MAC OS 6ft Black

  • 6 ft FT232 USB to TTL serial adapter (with 6 pin 0.1” pitch female socket header) connects devices with 5V logic level UART signals interface to a....
  • A genuine FT232RL chip module is housed in USB 2.0 type A male terminal for wider compatibility and supports reliable data transfer rates.
  • 6 feet FTDI USB to TTL serial cable (6 way outputs, Single-In-Line ) provides access to Tx, Rx, RTS#, CTS#, VCC (5v) and GND.
  • FTDI chipset on the PCB board has configurable internal EEPROM and UART signals can be individually inverted by configuring the EEPROM.
  • 6 pin header 5V TTL to USB converter cord is compatible with Windows 10, 8, 8.1, 7 (32, 64-bit), 2008/XP/Vista/CE, Mac OS, Linux 2.4 and greater.
Check Stock

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP for Arduino (4pcs)

  • The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core.
  • ESP32-CAM WiFi Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP for Arduino, Support Image WiFi Upload and TF Card.
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
  • Support OV2640 and OV7670 cameras, built-in flash.
  • Support image WiFi upload and Support TF card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Check Stock

Raspberry Pi Pico With Vilros Keychain Carrying Case

  • The Pico is a low cost, high performance microcontroller board built around the Raspberry Pi RP2040 chip Dual core ARM Cortex M0+ processor at up to 133MHz with variable core frequency 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC and 16x controllable PWM channels.
  • Includes Vilros Picoboat Keychain Carrying Case.
Check Stock

Raspberry Pi Pico With Vilros Keychain Carrying Case

  • The Pico is a low cost, high performance microcontroller board built around the Raspberry Pi RP2040 chip Dual core ARM Cortex M0+ processor at up to 133MHz with variable core frequency 2x SPI, 2x I2C, 2x UART, 3x 12-bit ADC and 16x controllable PWM channels.
  • Includes Vilros Picoboat Keychain Carrying Case.
Check Stock

Beaster Voice Recognition Module with Microphone Dupont Jumper Wire Speech Recognition Voice Control Board for Arduino

  • This product is a speaker-dependent voice recognition module. It supports up to 80 voice commands in all..
  • This board has 2 controlling ways: Serial Port (full function), General Input Pins (part of function). General Output Pins on the board could generate several kinds of waves while corresponding voice command was recognized..
  • Digital Interface: 5V TTL level for UART interface and GPIO.
  • Analog Interface: 3.5mm mono-channel microphone connector + microphone pin interface.
Check Stock

Orange Pi R1 Plus LTS 1GB RAM, Rockchip RK3328, Open Source Single Board PC Functional Computer Running Android 9/Ubuntu/Debian/Open WRT OS (R1 Plus LTS+Black Metal Shell Panel+Type-C Power Supply)

  • ...g fan interface (5V), double gigabit ethernet interface ..
  • 【EXTENSIBILITY】: 13pin connector with UART, I2C, IR pin, Tv-out, AUDIO (no MIC), 2*USB2.0 (not supported) and 1 GPIO port. Note: 13pin headers will not be welded. UART-TX、UART-RX&GND of debug serial port..
  • 【SUPPORT OPEN-SOURCE】: The Orange Pi Single Board Computers can builed a computer, a wireless server, Games, music and sounds, HD video, a speaker, Android, Scratch Pretty much anything else. Popular Linux-based distributions like Ubuntu、Debian ect operating system..
  • 【NOTICE!!!】: Packeage includ:1✖ Orange Pi R1 Plus LTS 1GB RAM, 1✖Type-C Power Supply, 1✖ Black Metal Shell Panel.By default, we won't responsible for customs clearance fee charged by your local. Our shipping time generally takes 15 days, Not as long as Amazon suggests.If you have any questions, pls contact with us, we will solve your problem within 12 hours..
Check Stock

SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic) High-Precision Breakout No Soldering Required Breadboardable Contains a Rechargeable Backup Battery Allowing a Warm-Start decreasing time-to-First-fix

  • Capable of 10mm, three-dimensional accuracy and both rover and base station operations.
  • Geofencing, variable I2C address, variable update rates, even the high precision RTK solution can be increased to 20Hz.
  • USB-C (which enumerates as a COM port), UART1 (with 3.3V TTL), UART2 for RTCM reception (with 3.3V TTL), I2C (via the two Qwiic connnectors or broken out pins), and SPI.
  • Compatible with Arduino library shows how to read latitude, longitude, heading and speed over I2C without the need for constant serial polling. Time to First Fix: 25s (cold), 2s (hot).
  • Note: This is the GPS board only. It does not come with cables or microcontroller..
Check Stock