ReviewsServo To Wifi Board

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard

  • MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
  • Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
  • Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
  • Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
  • Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....
Check Stock

Barnabas Robotics Servo Motor Tester Kit | 180 Degree 9g Servo Motor + RC Servo Tester Controller + 6V Battery Holder

  • [CONVENIENT, ALL-IN-ONE KIT FOR TESTING SERVO MOTORS] Experiment with servo motors with this all-inclusive kit. Includes 9g servo motor + servo tester controller + 6V battery holder at a low price!.
  • [9G Servo Motor] 180 degree range of motion. Includes 3 types of servo horns..
  • [4 CELL x AA BATTERY HOLDER] Fits 4 x AA batteries, which produces 6V for your servo tester and servo motors..
  • [SERVO TESTER] Includes 3 modes to test servo motors or ESC.
  • [GREAT FOR RC APPLICATIONS] Use as a power source for robotics, RC cars, helicopters, planes, boats and or any hobby projects.
Check Stock

WEISHUJI 10PCS 25T Aluminum Servo Horns Arms, M3 Threads Metal Steering Arm for Towerpro, HSP, HD power, Futaba, Axial, Savox, Xcore, Standard Servos Motors, MG995 MG996R MG946R, S3003 etc servo (Red)

  • 25T Aluminum Servo Horns Arms are suitable for mostly 25T Standard Servo Motor, and M3 Threads Metal Steering Arm is compatible with Towerpro HSP HD power Futaba Axial Savox Xcore Standard Servos Motors MG995 MG996R MG946R S3003 etc servo..
  • 25T Aluminum Servo Horns Arms are made of strong aluminum, 25T Aluminum Servo Horns M3 Threads are hard to break..
  • 25T Aluminum Servo Horns Arms are of dimension 35x15x6mm, and Metal Steering Arm behaves very well on your RC models..
  • 25T Aluminum Servo Horns Arms are djustable type servo arm, and M3 Threads Metal Steering Arm have two steel bolts to secure the split-clamp onto the servo output..
  • Package of 25T Aluminum Servo Horns Arms include: 10 x 25T Aluminum Servo Horn-Red, M3 Threads Metal Steering Arm, 25T Aluminum Servo Horns M3 Threads some hardware.
Check Stock

SkyWatcher S11800 GoTo Collapsible Dobsonian 8-Inch (White)

  • LARGE APERTURE: Get a bright, bold viewing experience at a fraction of the cost of other optical designs..
  • INNOVATIVE COLLAPSIBLE DESIGN: Unique strut design allows for optical tube to collapse for ease of portability while keeping collimation..
  • BUILT-IN WIFI: Control your telescope using a smartphone or tablet with Sky-Watcher’s proprietary built-in wifi signal..
  • ALL METAL GEARING: Using all-metal gearing on a pair of DC servo motors, the SynScan Dobsonian combines the precise automated tracking of a computerized GoTo telescope with the bright large-aperture viewing of a Dobsonian..
  • 94% REFLECTIVE MIRRORS: Fully multi-coated borosilicate primary and secondary mirrors deliver exceptional views..
  • 42,000 OBJECT DATABASE: SynScan hand controller with 42,000+ object database will keep even the most experienced astronomer busy for countless observing nights..
  • COMES COMPLETE: All accessories such as, 2-inch Crayford-style focuser with 1 1/4-inch adapter, two super wide-angle eyepieces (25mm and 10mm), and 9x50 straight-through finder scope are included with purchase..
  • STURDY AND LIGHTWEIGHT DESIGN: When fully assembled, the Dobsonian weighs only 57 pounds fully assembled (24 pound tube, 33 pound base).
Check Stock

Gym Trainer

  • NEW UPDATeS MORE RESISTANCE: The New Apollo Board functions as 5 Industrial Cable Gym Machines in One Compact Device. It replaces home weights, dumbbells, and stationary gym equipment. No installation. No assembly. 288 lbs of total resistance..
  • WORKS WONDERS FOR MULTIPLE WORKOUTS: The Apollo Fitness Board lets you choose from standard, eccentric, and isokinetic training modes. Now with two NEW training modes - elastic and rowing! For bodybuilding, weight training, yoga, core, and fat burning!.
  • WIFI AND BLUETOOTH COMPATIBLE: With WiFi and Bluetooth streaming compatibility, this fitness board lets you accompany yourself with music during hours of workout. 200+ Free Courses, Stream Classes, and track your training with the built in FITZ APP.
  • HEAVY DUTY FITNESS BOARD: Made from premium quality materials, this fitness board is made to last and ensures your safety during workouts. The board can adjust from 3 - 288 LBS of resistance!.
  • FOLDABLE DESIGN: This fitness board’s foldable design allows for easy portability. You can also carry it easier with the handle by the center when fo....
Check Stock

MACH3 Controller USB MACH3 100Khz Motion Controller Card Breakout Board Controller Card for CNC Engraving Servo Motor Stepper Motor Servo motor

  • 【Functions】The function of this motion control card includes that it supports automatic probe tool, emergency input, limit switch, and supports....
  • 【4-axis Linkage】Usb interface board supports for 4-axis linkage, you can connect four stepper motor drives or servo drives. 4 general-purpose....
  • 【Wide Use】The maximum step-pulse frequency of motion control card is100KHz, which is very suitable for CNC Engraving, Servo Motor, Stepper Motor....
  • 【Advantage】The motion controller needs using external 24V DC power to isolate USB and external port, and to make the system more stable. And it....
  • 【Drive Output Interface】The 4 general-purpose isolated relay drive output interface can drive four relays for controlling the spindle starts,....
Check Stock

TecUnite 20 Pieces 3-Pin Extension Cable Cord Female to Male Wire Connectors for Servo Extension Connection Control Board Remote Control Parts(4 Sizes)

  • Servo extension cord sizes: have 4 different lengths of 10 cm/ 3.94 inch, 15 cm/ 5.9 inch, 30 cm/ 11.8 inch and 50 cm/ 19.7 inch, each length has 5 pieces servo extension cords.
  • Application: these servo extension leads are compatible with Futaba and JR servo, plane and helicopter servo connection or receiver connection, remote control car, RC Car.
  • 3-Pin servo extension wire: each servo extension has 3 pieces of 0.08TS wires, universal model.
  • Connectors with 3 pins and have an angle in case you will install incorrectly, convenient for use.
  • Female to male servo extension cable: featured with female connector on one side and male connector on the other side, can be connected to the receiving set and steering engine.
  • Package includes: 20 pieces of female to male servo extension cable wires with 4 different lengths, enough for you to use on different occasions.
Check Stock

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

  • On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
  • Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
  • (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
  • Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  • The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
  • With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Check Stock

Que-T Brass Steering Servo Horn Arms 3.1/4.1/5.1mm for RC Car Boat Rudder Parts (Brass, 4.1mm)

  • Suitable--The servo arm is suitable for EMAX ES08MA II/ES08MD II Servo (For Axial SCX24 Crawler)..
  • High Quality--Our rc servo arm is made of aluminum alloy material, not easy to corrode, construct for precision and durability..
  • High Precision--CNC machining makes it precise in size and stable in performance..
  • RC Servo Bracket--This servo arm comes with a servo bracket, which is made of high quality aluminum, anodized and durable..
  • What You can Get--A rc servo arm with some screws, easy to install, and a rc servo bracket..
Check Stock

MakerFocus WiFi Test Tool ESP8266 WiFi Deauther Watch V3 DSTIKE NodeMCU ESP8266 Programmable Development Board & ESP8266 WiFi Module ESP8266 WiFi Deauth Detector V3 (Pre-flashed) with Buzzer RGB LED

  • Product operation link, available in the product guide and documentation.It is an ESP8266 development board, but you can wear it like a smartwatch, more convenient.
  • Wifi Testing Tool: This esp8266 dev board is installed with the latest ESP8266 Deauther software. With this software, you can perform different secure tests for your WiFi networks. NOTE: ESP8266 only supports 2.4GHz.
  • Extension Board: You can use it to develop your own software. It is indeed a ESP8266 development board and easy to operate Long Working Time: Built-in an 800mAh lithium battery, working time up to 8-10 hours.
  • Please get the documentation from the Product guides and documents below: It will tell you What is wifi deauthentication attack, USB attack firmware, the way to RGB LED Test: You have to install Adafuit RGB LED library first. and CP2102 Driver Download link.
  • It is a device which could detect a WiFi deauthentication attack.It is also an ESP8266 starter kit, you can use it learn esp8266. You can start from how to control the highlight LED or RGB LED..
Check Stock