ReviewsServo Voltage Stabilizers

DS3218 High Torque Metal Gear Digital Servo Water Resistant RC Servo 20kg 270 Degree Rotation RC Toys DIY Model for Baja Cars (Pack of 4 Sets)

  • Fit for: tekno sct 410.3, ruster chassis, dhk maximus, TRX4, Gen 7 pro etc.
  • This servo is waterproof,but it can not work underwater.
  • What you will get: 4pcs DS3218 digital servo and 4pcs 25T Servo Arm.
Check Stock

BETU 2Pack Rc Servo 12g Mini Servo, Mini Steering Servo with Metal Gear for RC Car/Boat/Model

  • 12g Mini Metal Gear Servo, 180 degree rotation, high sensitivity, stable and low-noise..
  • The rc servo's operating voltage: 4.8V~6.0V.
  • Connector type: Futaba/JR compatible, Compatible with all SCX24 models..
  • Wide range of application: Exquisite part, perfect for RC Helicopters KT, fluttering, gliding, small robots, and other models.Wide range of application: Exquisite part, perfect for RC Helicopters KT, fluttering, gliding, small robots, and other models..
Check Stock

ALMOCN 8PCS SG90 9G Micro Servo Motor Kit Mini for RC Robot Arm Helicopter Airplane Car Boat Controls Project

  • Application Fields: remote control helicopters, micro robot, robot arm and boats. ALL kind of R/C Toys and Arduino project..
  • Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Interface Type: Compatible with JR & FUTABA interface. Running Speed (at no load): 0.09 ± 0.01 sec/60°(4.8V ) 0.08 ± 0.01 sec/60°(6V). Maximum....
  • Amplifier Type: Analog controller. Operating Voltage: 4.8V～6.0V.
  • NOTE: The Starting Current of The Analog Servo Motor Should Be Over 1A and Miuzei Servo SG90 are Analog Servos Need to Continuously Provide a PMW....
Check Stock

Miuzei 20KG Servo Motor High Torque Digital Servo Metal Waterproof Servo for R/C Car Robot, DS3218 Control Angle 270°

  • DS3218 20kg digital servo,accuracy with precision potentiometers, high quality leads and center nicely..
  • High torque steering servo for robot arm,boats,vehicles and remote control toys..
  • Size:40*20*40.5mm Weight: 60g Operating voltage range(4.8-6.8V) Dead band width:3 μsec.
  • Stall torque (at locked):18 kg-cm(5V)/21.5 kg-cm(6.8V) Waterproof performance: IP66.
  • Please Note: To use a 20kg steering gear, you need to ensure the correct line connection, provide 500~2500usec pulse signal, meet the power supply voltage of 4.8V~6.8V.
  • when the input signal reaches 2500usec, the angle rotates to 270 degrees).
Check Stock

Nema23 2N.m 57 Hybrid Closed Loop Servo Stepper Motor 2Nm 76mm+HSS57 Servo Driver Controller CNC Kit 24-50V DC For CNC Router Engraving Milling Machine

  • Name:Nema23 2N.M Servo Motor Driver CNC Kit.
  • Servo Driver:HSS57 2-Phase Hybrid Stepper Servo Driver.
  • The torque reducing is much lower than open loop stepper motor when it is at higher speed.The high speed performance and torque are enhanced in a....
Check Stock

Nema24 3N.m Closed Loop Stepper Servo Motor 88mm 5A+HSS60 Hybrid Driver CNC Kit for CNC Router Engrvaving Milling Machine

  • Servo Driver:HSS60 2-Phase Hybrid Stepper Servo Driver.
Check Stock

DWEII MG995 Servo Motor Control 180 Angle Metal Gear Servo 20KG Digital High Speed Torque Servo Motor for Smart Car Robot Boat RC Helicopter Pack of 3

  • Stall torque: 12kg/cm(6V), 13kg/cm(7.2V). Recommended voltage: 5V, current usage: 3A.
  • Application: Analog Servo Motor Great for RC Helicopters, Micro Robots,Robotic Arms and RC Rock Crawler, RC Boat Motor,Truck, Boat, Racing Car,Various Remote Control Toys.
  • Dimension:40.7*19.7*42.9mm(1.6*0.78*1.69in).
  • This high-speed standard servo motor can rotate 180 degrees (90 in each direction)..
  • Good performance digital standard servo, which can be a common use for robots, mechanical arms, climbing cars and remote control toys..
  • Compatible with most standard receiver connector.
Check Stock

Team Associated Apex2 Sport A550 Rally Car RTR ASC30126 Trucks Electric RTR 1/10 Off-Road

  • 2.4GHz 2-channel radio W/ dvc (dynamic vehicle control) receiver.
  • High-torque, Metal-gear Reedy servo with spring style servo saver.
  • Water-resistant high-power Reedy Brushless speed control with T-plug connector and LiPo low voltage cutoff.
  • Realistic method wheels with 12mm front and rear hex-drive nuts.
Check Stock

MMOBIEL Micro Servo Motor Kit MG995 55g 360° for RC Drone / Car / Airplane / Helicopter / Vehicles / Robots / Compatible with Arduino Projects and Raspberry Pi Incl. Screws and 4 Servo Arms

  • ...ut Together with Care. to give You the Best Experience in Controlling Your Remote Controlled Vehicle. Interface Type: Compatible with JR & FUTABA interface..
  • Servo Motor Specs: No Load Running Speed: 0.09±0.01 sec/60° Degree at 4.8V.
  • Stall Torque (4.8V): 152,76 oz/inch / 11kg/cm, Type: Analog Controller, Operating Voltage: 4.8V - 6.0V, Left & Right travelling Angle deviation: ≤ 6° Degree, Centering deviation:≤ 1° Degree, Maximal Angle 120° Degree Neutral position: 1500 μsec, Dead band width:7 μsec (microsecond), Rotating direction: Counter Clockwise (900→2100μsec), Pulse width range: 900→2100 μsec, Operating Temperature Range: 0℃～55℃elcius.
  • Compatibility: Compatible with Remote Control Drones, Helicopters, Cars, Boats, and all sorts of RC Toys and hobby projects. Can also be used with any type of Arduino project, Raspberry Pi, Futaba, JR, Sanwa and Hitec remote system..
  • Set Contains: 1x MG995 Micro Servo Motor 55G, 1x 3 Colored Cable (Brown / Yellow / Red) with a Futaba Connector Plug, 4x Servo Horn Steering Arms (Star, Arm, X, Wheel), 4x Stainless Steel Screws..
  • High quality product by MMOBIEL: Each part is tested before shipment. Item in Stock..
Check Stock

Seamuing Micro Servo Motor MG995 RC Servo 20kg Metal Gear Servo for RC Robot Arm Helicopter Airplane Remote Control 4PCS

  • Fits for RC Robot, Helicopter, Drone, Car, Boat.
  • Operating Speed (4.8V no load): 0.1sec/60 degrees.
  • Stall torque: 1.2kg / 1.4kg/cm(4.8V). operating voltage: 4.8V-6V.
  • Packaged Included:( 1 x SG90 Gear Micro Servo, 1 x roker arm, 1 x screw)*1pc/ 2 pcs/ 4pcs.
Check Stock

REEFS RC 422HDv2 Servo Winch with Built in Controller, SEHREEFS43

  • Reef's RC REEFS43 - 422HDv2 Servo Winch & Built In Controller.
  • Features: "Submarine Waterproof" 7075 Aluminum CNC-Machined Spool w/Clear Finish 7' Silicone Coated Steel Braided Line, w/Scale Recovery Hook Internal Steel Gears All CNC Aluminum Casing Anodized Color: REEFS GRAY.
  • Includes: (1) Servo Winch with Built in Controller.
  • Specs: Bearing Type: 2BB Operating Voltage: 4.8V-8.4V Weight: 2.84oz Dimension: 1.57" x .79" x 1.5" (LxWxH) Torque: 405oz @ 6.0v / 450oz @ 7.4v / 480oz @ 8.4v Speed: .11sec @ 6.0v / .10sec @ 7.4v / .09sec @ 8.4v Spline: 25T.
  • Part number(s) included (in factory packaging): REEFS43.
Check Stock