ReviewsServos Truck

G.T. Power Servo Tester Multi 3CH ECS Consistency Speed Controler Checker CCPM Master for RC Helicopter Car Boat

★ Aluminum shell, durable and lightweight, easy to operate buttons. A new upgraded servo tester..
★ 3 modes to check servos or ESC, manual mode, neutral mode, automatic “window wiper” mode, you can manage the servo tester as your need..
★ You can also connect 1-3 ESC to test and compare their reaction time respectively..
★ GT Power Servo Tester can connect 3 servos of the CCPM helicopters, adjust the helicopters and select servos, multi-function..
★ The device also can be used as a signal generator for electric speed controller (ESC). With it, you can test your motor system without using a transmitter and receiver..

Outrageous TRX 3.3 power and Lightweight 2WD chassis deliver astounding performance and fun up to 50mph!.
Authentic Nitro pro 2WD action in a short-course race truck with officially licensed racing replica bodies and tires.
High-torque steering and throttle servos, high-flow dual-stage air filter, and tuned exhaust system with Blue-anodized aluminum header.
Traxxas Electric EZ-Start includes battery and 2-amp 12-volt DC Peak detecting fast charger.
Advanced TQi 2.4GHz transmitter and receiver with 44056-3 HWN memory for fine tuning your speed machines and TSM stability control.

Torque(6.0v/7.4V): 24.0 kg-cm (333 oz/in) │ 25.0 kg-cm (347 oz/in) Speed(6.0v/7.4V): 0.08 sec/60°│ 0.07 sec/60°.
The Coreless motor provides high speed, response, incredible efficiency and low power consumption..
Full waterproof servo to maintain good water tightness in wet conditions.Extremely strong unique steel gears ensure long-life and durability..
High precision potentiometers and High-resolution digital chip, stable performance, strong anti-interference ability, fast response, high precision,....
Used For: 1/8, 1/10, 1/12 Scale Crawler / Truck / RC Car, Robot, Boat and any application where waterproof standard servos are used.

Traxxas 59076-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Red.
Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body Di....

Traxxas 59073-3 – Slayer Pro 1/10 Nitro 4X4 Short Course Truck RTR, Blue.
Features: Traxxas Stability Management (TSM) TQi 2.4GHz Transmitter and Receiver Hard-anodized, PTFE-coated GTR shocks with titanium-nitride shafts High-Torque, Waterproof steering and throttle servos Split-Spoke SCT wheels with chrome centers and colored beadlock trim Aggressive, authentic Pro 4X4 body design TRX 3.3 engine with EZ-Start electric starting Polished Resonator dual-chamber tuned pipe Extended chassis from the National Champion Revo 3.3.
Includes: (1) Slayer Pro 4WD Truck with Oil-Filled Shocks (1) 3.3 Engine, EZ-Start (1) Body (4) Tires (4) Wheels (4) Foam Inserts (1)TQi 2.4GHz Radio (1)Digital Ball Bearing Steering Servo (1)Standard Servo (1)15T Clutch Bell (1)38T Spur Gear (2) Air Filter Elements (1) 7.2V Battery (1) 2-Amp DC Car Charger (1) Extra Glow Plug (1) Fuel Bottle Filter Oil Long Travel Rocker and Spring Set Tool Set Illustrated Manual.
Specs: Vehicle Dimensions: Length: 23.54″ (598mm), Width: 11.65″ (296mm), Height: 7.87″ (200mm) Weight: 7.78lb (3.53kg) Wheelbase: 13.9″ (353mm) Front and Rear Track: 12.68″ (322mm) Outer Edges of Tires Center Ground Clearance: 2.5″ (63.5mm) Gear Ratio (1st Gear): 15.75:1 Gear Ratio (2nd Gear): 10.05:1 Body D....

POWERFUL RC HELICOPTER: Powerful coreless motors allow for advanced 3D maneuvers..
LIGHT WEIGHT: Low disc loading for advanced aerobatics..
LINEAR SERVOS: Provide faster response and better holding torque over normal rotary servos..
INCLUDES: 45C LiPo Battery - High power output for limitless aerobatics..
CONVENIENCE: USB Charger - Provides charge-anywhere convenience..

Meets the needs of today's demanding pilots.
Surface Mount Technology improves reliability in applications where there is vibration.
High impact plastic case is designed to withstand minor crashes and the effects of model fuel.
Genuine Futaba servos are your easiest and most efficient way to upgrade your Futaba system.
Performance and reliability have made Futaba servos the favorite choice of professionals.

What are included:Dynam B-26 Marauder airplane, motors, ESCs, 7*9g servos, 17g*2 servos.
What are required (Not included):6-Channel or above transmitter.
Recommend for age of 14 years and above..

Construction: Carbon boom, fiberglass fuselage, servo tray in fuselage is sized for the Tactic TSX5 micro servos, but may be enlarged for other servos, pre-hinged control surfaces for easy assembly.

INCLUDES 3 (Three) Servo Horns & Screws To Attach The Arm To Servo.
25T Works On Futaba, Savox, Orion, & Other Popular Servos (Will Not Work On Hitec Or JR Servos).
4 Mounting Positions - 15mm, 18.5mm, 22mm & 24.5mm.

【Large Torque-25KG】Maximum torque can be up to 25kg, rated voltage is 6V, the operating voltage range is 4.8V~7.4V.
【Features】Fast response, high precision, silent when locked, large torque, dual axis design, power balance,stable performance..
【High Rotation】Adjustable angle from 0 to 270 degrees, with 32CM soft silicone wire,excellent linearity, precise control. (PWM 500-2500μs).
【High Quality】CNC aluminium middle Shell and full metal gear enhance the heat dissipation, high precision, control is more delicate and smooth operation..
【Widely Application】Compatible with 1/8 ,1/10 scale truck crawler,buggy,robotic arm,ship models,robotic arms,intelligent robots,and any application where standard servos are used,Is your great choice..