ReviewsSetscrew Shaft Collar

Sealmaster NP-24 Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/2" Bore, 1-15/16" Base to Center Height, 5-3/8" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

Sealmaster NP-20R Pillow Block Ball Bearing, Non-Expansion Type, Normal-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 1-1/4" Bore, 1-11/16" Base to Center Height, 4-3/4" Bolt Hole Spacing Width

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

Sealmaster MP-32 Pillow Block Ball Bearing, Non-Expansion Type, Medium-Duty, Regreasable, Setscrew Locking Collar, Felt Seals, Cast Iron Housing, 2" Bore, 2-1/2" Base to Center Height, 6-3/4" Bolt Hole Spacing Width, ±2 degrees Misalignment Angle

  • Two-bolt housing with ball bearing insert for a ready to mount installation.
  • Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads.
  • Relubricatable solid one-piece housing pillow block for maximum strength and rigidity.
  • Non-expansion-type bearing with setscrew locking collar for secure attachment to guided shaft.
  • Felt seal to protect against contaminants and retain lubrication.
Check Stock

NTN ASPF205-100 Light Duty Flange Bearing, 3 Bolts, Setscrew Lock, Non-Relubricatable, Contact Seals, Pressed Steel, Inch, 1\ Bore, 2-63/64\ Bolt Hole Spacing Width, 3-3/4\ Height, 1770 Static Load Capacity, 3150 Dynamic Load Capacity

  • Pressed steel flanged housing for light-duty applications with low to moderate speeds.
  • Light-duty, double-sealed radial ball bearing insert with a narrow inner ring accepts moderate radial loads and light thrust or combination loads.
  • Synthetic rubber lip contact seals on both sides of the bearing keep lubricant in and contaminants out.
  • Setscrew lock for a three-point contact hold on the shaft.
  • Extended inner ring for increased shaft support.
Check Stock

Boston Gear HLK103Y Miter Gear, 1:1 Ratio, 20 Degree Pressure Angle, 0.750\ Bore, 10 Pitch, 20 Teeth, Steel

  • Straight miter 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Hardened teeth for 1:1 gear ratio applications where hardness and strength are needed to transmit torque and motion.
  • Bore has keyway and setscrew for use with keyed shaft.
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (5.1mm)

  • EASY TO USE: The shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • REUSABLE: The locking shaft collar adopts carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • HIGH EFFICIENCY: Pattern edge of lock shaft collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • COMPACT SIZE: The shaft collar assortment adopts appearance plating process, no rust, no scratch, which is compact design for easy portability and storage..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs, very practical in work and life, can bring you more convenience..
Check Stock

4pcs Mod 1 Pinion Gear 5mm Set Hardened 19T 20T 21T 22T M1 Pitch Gears RC Upgrade Part with Screwdriver

  • Hardened steel 19 20 21 22 tooth, Mod 1 pitch pinion gear for motors with a 5mm shaft..
  • CNC machined- Hardened steel to increased wear resistance and improve fatigue life.
  • YOU WILL RECEIVE: - Four (4) pinion gear - Four (4) M4x4mm setscrew-One(1) 2mm hex wrench.
  • This item works with: Arrma Kraton 6S BLX.Nero 6S BLX.Notorious 6S BLX.Outcast 6S BLX.Typhon 6S BLX.HPI Savage Flux.Losi 8IGHT-E2 3 4.Losi 8IGHT-T E....
Check Stock

4pcs Mod 1 Pinion Gear 5mm Set Hardened 15T 16T 17T 18T M1 Pitch Gears RC Upgrade Part with Screwdriver

  • Hardened steel 15 16 17 18 tooth, Mod 1 pitch pinion gear for motors with a 5mm shaft..
  • CNC machined- Hardened steel to increased wear resistance and improve fatigue life.
  • YOU WILL RECEIVE: - Four (4) pinion gear - Four (4) M4x4mm setscrew-One(1) 2mm hex wrench.
  • Fits: Arrma Kraton 6S BLX.Nero 6S BLX.Notorious 6S BLX.Outcast 6S BLX.Typhon 6S BLX.HPI Savage Flux.Losi 8IGHT-E2 3 4.Losi 8IGHT-T E 3.0.Losi LST....
Check Stock

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (6.1mm)

  • EASY TO USE: Pattern edge of shaft lock collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • REUSABLE: Shaft lock ring has carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • CONVENIENT: Shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • DURABLE: Lock shaft collar adopts appearance plating process, no rust, no scratch, with good performance and long service life..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs..
Check Stock

Double Split Shaft Collar 1\ Bore Width 1/2 Inch Oxide Set Style Black (2 Pcs)

  • Double Shplit Shaft Collar 1" Bore Width 1/2 Inch Oxide Set Style Black (2 Pcs).
  • Product Name : Bore 1" Two-Piece Clamping Shaft Collar Carbon Steel.
  • Outside Diameter : 1-3/4"(1.75 Inch/ 44.45mm).
Check Stock

3 Inch Cast Iron Pulley and Precision Bearing (300 lb Load)

  • Garage Door Parts - Garage Door Hardware - Garage Door Shaft Collar Shaft Collar.
  • Dimensions: 1″ Bore, 1-7/16″ Outside Diameter, 9/16″ Wide.
Check Stock