ReviewsSf6 Load Switch

Nortek GoControl WD500Z5-1: Z-Wave Wall Dimmer Switch 500W 908.42 MHz 120VAC 15A

  • ...Mounted Dimmer integrates with other Nortek Security & Control Z-Wave enabled products, and can also act as a wireless repeater to ensure that commands intended for another device in the network are received (useful when a device would otherwise be out of radio range)..
  • Replaceable Trim Ring The WD500Z5-1 Wall Mount Switch has a field replaceable trim ring - the color of the device can be altered with the Trim Ring Kit model in black, brown, almond and ivory. Auto-Sense: Unique to Nortek Security & Control, the Auto-Sense feature allows for local lamp activation independent of the Z-Wave controller status..
  • Maximum Load: 500 Watts for control of permanently installed lighting fixtures only (Not for control of receptacles) Signal (Frequency): 908.42 MHz Range: Up to 100 feet line of sight between the wireless controller and/or the closest Z-Wave device Input: 120v 15A 60Hz.
  • Network wide inclusion Scene: Command class Security beaming Requires a Neutral Auto-Sense feature built-in Replaceable trim ring design.
  • Note to Installers: When installing a Z-Wave 3-Way Light setup utilizing Nortek Security & Control products, you will need a Load Bearing switch (WS15Z-1, WD500Z-1 or WD1000Z-1) and a non-load bearing WT00Z-1. Multiple WT00Z-1 switches can be utilize....
Check Stock

The Cobra Event: A Novel

  • ...n to under 0.3 percent at no load and under 1.2 percent at full load, making it safe to run laptops, cellphones, monitors, tablets and other sensitive electronics.Includes two three-prong 120V receptacles, one 12V DC receptacle, two 5V USB ports, and a two-year warrantyMaximize fuel economy by engaging the eco-mode switch. This allows the generator's engine to automatically adjust its fuel consumption as items are plugged into and unplugged from the panel, preventing the unnecessary usage of gasoline..
  • Extremely quiet operation comparable to the sound of a normal conversation according to the US Department of Health and Human Services.
  • Produces 2350 surge watts and 1900 rated watts of clean power for safe charging of sensitive electronics (phones, tablets, televisions, computers, etc.).
  • Our 79cc 4-stroke OHV engine operates at an extremely quiet 51 decibels at quarter load, quieter than a window air conditioner or the average conversation..
  • Fuel shutoff maximizes the generator’s lifespan by using up the remaining fuel in the carburetor before shutting down.
  • Designed to mirror a pure sine wave, this generator limits total harmonic distortion to under 0.3 percent at no load and under 1.2 percent at full load, making it safe to run laptops, cellphones, mon....
Check Stock

Enbrighten Z-Wave Smart Rocker Light Switch, 3-Way Ready, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White & Light Almond, 46201 + 1 Add-On Rocker Switch 46199

  • ...ertified gateway. Supported voltage - 120VAC. Wireless range: Up to 150 feet.
  • SPACE-SAVING HOUSING DESIGN – Improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space..
  • EASY INSTALLATION WITH SIMPLE WIRE – Auto line-load sensing terminals on the switch support fast and easy installation by detecting line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups..
  • REQUIRES A Z-WAVE CERTIFIED GATEWAY – Compatible with the following Z-Wave certified hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera and Connect. Works with Alexa for voice control (hub required.
  • ALL-IN-ONE BUNDLE – Everything necessary to transform a traditional 3-way switch to a smart switch is included in the kit. The Enbrighten-branded Add-on Switch allows the Enbrighten-branded Z-Wave Smart Switch to operate correctly in multi-switch insta....
Check Stock

Smart Dual Dimmer Compatible with Alexa and Google Home, Single-Pole WiFi Smart Light Switch with Timer Remote and Voice Control, Neutral Wire Required,2Pack

  • Dual Dimmer Space-Saving - This Powerful tuya smart dimmer switch makes it possible to control two lights separately at the same time, double dimmer in one switch lets your home design more simple and graceful.This smart Wi-Fi switch is compact and space-saving, it is a great solution for stacked switches commonly found in kitchens and bathrooms..
  • Timming & Scheduling- The stacked switches set timer or countdown schedules to make your lights automatically turn on/ off while you're home or away. Have a smart home and create a customized schedule to automatically turn on/off lights, any home lamps, electricity, etc..
  • oice & Remote Control-Our tuya Dual smart light switch works with Alexa and Google Home Assistant, just speak a simple voice command to control your home devices.No Hub or subscription required..
  • Family Group Share-Set a group for all smart devices, include this dimmer switch, and control them in one command. Share your wifi switch to all family members in a minute. Meanwhile, you all can create various scenes for get up, sleep and so on..
  • Note- Neutral, Live, Load Wires are Required to Dual Dimmer Power Switch. Without Load/ Neutral, Please DO NOT Purchase. The alexa smart dual dimmer switch works in a single-pole setup only (Not 3-way). This....
Check Stock

UltraPro Z-Wave Smart Rocker Light Switch with QuickFit and SimpleWire, 3-Way Ready, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White Paddle Only, 4-Pack, 54891

  • Revolutionary, patent-pending design – QuickFit and SimpleWire technologies offer groundbreaking home automation features. Unique advancements make the smart controls easier to install and more reliable than ever..
  • QuickFit – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space..
  • SimpleWire – Auto-detecting line/load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups..
  • Voice control – Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub..
  • Switch upgrade – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures..
Check Stock

Enbrighten Z-Wave Smart Toggle Light Switch, 3-Way Ready, Compatible with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White, 46202 + 1 Add-On Toggle Switch 46200

  • ...ertified gateway. Supported voltage - 120 VAC. Wireless Range: Up to 150 feet.
  • SPACE-SAVING HOUSING DESIGN –Improved components reduced the housing depth by up to 20 percent compared to previous Z-Wave models and eliminated the need for heat tabs. Quick Fit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space..
  • EASY INSTALLATION WITH SIMPLE WIRE – Auto line-load sensing terminals in the switch support fast and easy installation by detecting line and load wires and configuring the dimmer accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups..
  • REQUIRES A Z-WAVE CERTIFIED GATEWAY - Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required.
  • ALL-IN-ONE BUNDLE – Everything necessary to transform a traditional 3-way switch to a smart switch is included in the kit. The Enbrighten-branded Add-on Switch allows the Enbrighten-branded Z-Wave Smart Switch to operate correctly in multi-switch i....
Check Stock

UltraPro Z-Wave Smart Rocker Light Switch with QuickFit and SimpleWire, 3-Way Ready, Works with Alexa, Google Assistant, ZWave Hub Required, Repeater/Range Extender, White Paddle Only, 2-Pack, 54890

  • ...on features. Unique advancements make the smart controls easier to install and more reliable than ever..
  • QuickFit – Improved components reduced the housing depth by up to 20% compared to previous Z-Wave models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space..
  • SimpleWire – Auto-detecting line or load terminals support fast installation by identifying line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-switch setups..
  • Voice control – Enjoy the convenience of voice control with Google Assistant or Amazon Alexa when connected through a compatible Z-Wave hub..
  • Switch upgrade – Easily replace any standard in-wall switch equipped with a neutral wire to remotely turn ON/OFF and create schedules for a wide range of fixtures..
  • Changeable paddles – The switch features a removable white rocker-style paddle. Black, brown, ivory and light almond options are also available..
  • Multi-switch compatible – The smart device operates perfectly on its own or seamlessly integrates into multi-switch setups when pai....
Check Stock

B&P Lamp® 3/8 Inch Shank 3-Way 2 Circuit Nickel Rotary Switch

  • 3-way 4-position 2 circuit rotary switch with nickel plated knob.
  • 3/8 inch metal shank, 6 inch long 18 gauge wire leads.
Check Stock

3 Way Smart Light Switch, Compatible with Alexa, Google Assistant, IFTTT, WiFi Light 3-way Switch, Neutral Wire Required, Schedule Setting APP Remote Control, ETL, No Hub Required (2)

  • Easy Installation: Our detailed instructions will guide you through the whole wiring process,5 wires (neutral, ground, live, load-1, load-2) connection required. Mount the switch with provided screws and snap the wall plate on it. Connect your home wifi(2.4 Ghz only) without hub required..
  • Smart 3-way Switch: You can use one Kuled smart 3-way switch with a traditional 3way switch to control lights from 2 locations or two Kuled smart 3-way control lights from 2 different locations. Such as installing one switch in bedroom and another in living room to control lights in living room..
  • Voice Control: Perfectly works with Amazon Alexa(Amazon Echo/Dot/Tap), Google Assistant. Enjoy hands-free control of your lighting experience. Saving the effort to press button..
  • App Remote Control: Control your device wherever or whenever you are via app. With the smart timer setting, you can set your smart 3-way switch to automatically on/off as you wish based on your daily routine..
  • Money Back Guaranty: CE, ETL, FCC approved for safety and quality assurance. We provide a 12-month warranty, 60 days money back and customer service within 24 hours. If you have any issues about our products, please feel free to contact us..
Check Stock

Motorcycle Headlight Switch, Sdootauto 2 Pack 7/8

  • Motorcycle headlight switch is universal 7/8 diameter design, fitting on most of motorcycles, ATVs, scooters.
  • Handlebar mount switch is On-Off-On headlight switch, without pilot lamp.
  • output circuit, overload, reverse polarity protection.
  • Motorcycle handlebar switch adopts aluminum alloy and premium plastic materials, sturdy and waterproof.
  • Handlebar light switch is used on DC 12V electrical system, with 56cm wires, long enough for your installation.
  • Easy to install: brown wire for negative pole of the power, blue wire for positive pole of the power, black wire for positive pole of the load.
Check Stock

Neewer D-Tap to BMPCC 4K/6K Coiled Power Cable Compatible with Blackmagic Pocket Cinema Camera 4K/6K Gold Mount V Mount Battery Weipu 2 Pin Female to P Tap, 16 inches - 50 inches Length

  • The D-Tap to BMPCC 4K/6K Weipu power cable is specifically compatible with Blackmagic Pocket Cinema Camera 4K/6K.
  • Connector Type: Connector 1: D-Tap. Connector 2: BMPCC 4K/6K Weipu SF6 2 Pin Female Plug.
  • Also fit for those using any V-mount or Gold mount battery with a D-tap plug.
  • Coiled cable for a flexible reach and neat setup. The cable length can stretch from 16 inches to 50 inches, allows your camera to connect the power more freely.
  • Every cable was tested to ensure that there is no short circuit, no potential breakdown problems before shipping. There is a key on the 2 pin connector, please match the key to plug in, please don't insert the 2 pin plug or d-tap connector inversely.
Check Stock