ReviewsSfp Cable 100ft

Digital Optical Audio Cable Toslink Cable - [Cotton Braided Jacket,Durable and Flexible]EMK Fiber Optic Cord for Home Theater, Sound bar, TV, PS4, Xbox & More (6.6Ft/2m)

  • ★ HIGH QUALITY MATERIAL — Fiber Optic Cable body is made of PVC/ LSZH plastic materials, which is shiny, tough, environmental protection, not fade, not broken and not easily deformed. The inside optical cable is aramid, which is tough, tensile, non-toxic, fire retardant, core protection and low smoke. The connector is PBT plastic materials and fine copper, which is firm, durable, environmental protection, high temperature resistant, not fade, not broken and not easily deformed..
  • ★ HIGH QUALITY IMPORTED CORE — The core is OM3 of CORNING US, which is easy to weld, ensures small optical loss and stable transmission. The mortise is Japan imports zirconia powder ceramics, which is no data loss and has a long life( the usage count is more than 1,000 times) ..
  • ★INTERNATIONAL TELECOMMUNICATION STANDARD — The product has exquisite and mature crafts, conforms with International Telecommunication Standard. Using corners pressurized grinder and lapping process of SEIKO JAPAN, the core and mortise is no offset and the end face is no gap, no spots, no scratches and no depression. The One-Time Pass Rate of 3D Interferometer is up to 98%, conforming International IEC Standard..
  • ★ MULTIMODE DUPLEX — 50/125 micron fiber cables with dual small form factor ....
Check Stock

Mikrotik RB951G-2HND 5-Port Gigabit Wireless AP 1000mW

  • No switch-chip - the device features only fully independent Ethernet ports each with a direct connection to the CPU.
  • Combo-port - a single 1Gbit software interface that has two hardware interfaces - an SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you.
  • 100Mbps SFP support - this is our first device that supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
  • More throughput - because the ports are now directly connected to the CPU, the new CCR1009 can achieve even higher throughput.
  • This unit is equipped with passive cooling enclosure, two heat-pipes and a specially designed heat-sink, so its completely silent.
Check Stock

10Gb SFP+ RJ45 Transceiver 10Gbase-T SFP+ Ethernet Copper Module Compatible with Cisco SFP-10G-T-S Ubiquiti UF-RJ45-10G UniFi Meraki MikroTik Supermicro and More Cat6a/ Cat7 30m

  • ✅10Gbase-T Module: 10Gb/s SFP+ to RJ45 Ethernet Copper Transceiver,support links up 30m (98 Ft) over Cat6a/ Cat7 cable. SFF-8431 and SFF-8432 MSA....
  • ✅Wide Compatible: For Cisco SFP-10G-T-S, Meraki, MikroTik, Ubiquiti UF-RJ45-10G, Unifi, Netgear, QNAP, D-Link, Supermicro, TP-Link and and Other....
  • ✅ Easy to Use: PLUG and PLAY, Hot-swappable. Rotate the ring latch down at a 90 degree angle to unlock it, then pull the transceiver out of sfp+....
  • ✅2.5 Power Consumption: Adopted the latest IC: Marvell 88X3300power, Low EMI and advanced ESD protection. 10Gbase-T module is recommended to be used....
  • ✅After-sales service: Provides 24/7 Customer Service, 30 Days Free-returned, 3 Year Free Warranty and Lifetime Technology Support..
Check Stock

1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)

  • [How to Use] Singlemode and Multimode converted by transceivers, Dual Fiber and Single Fiber converted by transceivers, SFP to CWDM SFP converter..
  • [Multirate] Support for SFP transceivers with data rates from 100Mbps to 2.5Gbps through two SFP slots. (Important: Use matching speed modules in SFP1 and SFP2 only.).
  • [Protocol Transparent] Compliant with all protocols, as long as the data rate is correct..
  • [Easy Installation and Use] Modulization configuration design, support hot-swappable, plug and play. LED indicators for P1, P2, POWER can dynamic feedback link connection state and fault detection to easily monitor network status..
  • [Warranty] 3-year warranty and lifetime technical support..
Check Stock

MikroTik Cloud Core Router CCR1009-7G-1C-1S+

  • CCR1009-7G-1C-1S+ Supports 100BASE-LX/100BASE-SX/100BASE-BX fiber modules, as well as standard 1.25G SFP modules.
  • A SFP cage and a Gigabit Ethernet port, allowing you to use any type of connection available to you.
  • The unit is equipped with dual power supplies built in for redundancy (if one power line fails, the other one will take over automatically).
  • Unit comes with the 1U rackmount case and supports a Smart card, to store your private key for use in all features that support Certificate based authentication.
  • Comes with 1U rackmount, 7x Gigabit Ethernet, 1x Combo port (SFP or Gigabit Ethernet), 1xSFP+ cage, 9 cores x 1.2GHz CPU, 2GB RAM, LCD panel, Dual Power supplies, SmartCard slot, RouterOS L6.
Check Stock

HP Procurve 2510-24 Managed Ethernet Switch (J9019B#ABA)

  • HP ProCurve 2510-24 Managed Ethernet Switch - 2 x SFP (mini-GBIC) - 24 x 10/100Base-TX, 2 x 10/100/1000Base-T.
  • HP ProCurve 2510-24 Managed Ethernet Switch.
  • 2 x SFP (mini-GBIC) - 24 x 10/100Base-TX, 2 x 10/100/1000Base-T.
Check Stock

Linksys WMP54G PCI Wireless Adapter Refurbished

  • QUAD SFP+ ADAPTER: 4 ports on SFP+ network card can provide redundancy, or be aggregated for demanding applications.
  • TECH SPECS: 10 Gbps per port | 4 SFP+ Ports, MSA Compliant | Intel XL710| MMF & SMF Fiber Support | PCIe 3.0 x8 | PXE Boot | 9K Jumbo Frames | Link....
  • TESTED & VERIFIED PERFORMANCE: We use Spirent SmartBits to validate performance.
  • converged network adapter is compatible w/ leading servers like Dell....
  • FLEXIBLE: Use MSA compliant SFP+ module or direct attach cable (DAC) supporting different fiber types.
  • 10 Gigabit Ethernet NIC works w/leading brands....
  • WIDE HYPEVISOR & OS COMPATIBILITY: Fiber LAN card compatible w/Windows 7, 8, 8.1, 10.
  • Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019.
Check Stock

SFP+10GBASE-T Transceiver Copper RJ45 10Gbe SFP Module Compatible for Cisco SFP-10G-T-S, Meraki MA-SFP-10G-T, MikroTik, Unifi, Netgear, QNAP, Supermicro, Cat6a/ Cat7, 30m

  • [Data Rate] 10G, multi-rate (The switch optical port must be support 10G, the optical port on the other switch end can support multi rate). 10G SFP+ to RJ45 Copper module for CAT6A/7/8 cable, copper RJ-45 connector. Supports 1000Mbps rate for using Cat 5e cable or better. (30 meters via 10Gbps, 50 meters via 5Gbps and 2.5Gbps, 100 meters via 1000Mbps.).
  • [Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches..
  • [Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
  • [High Quality] All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
  • [After-sales Service] 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to conta....
Check Stock

RamboCables 2m(6ft) OM4 LC LC Fiber Patch Cables MMF Multimode, Options 0.2m~122m, LC to LC Fiber Optic Cable Duplex, 50/125μm 40G/100G LSZH

  • 【2m/6ft OM4 LC-LC Fiber Patch Cable】 RamboCables OM4 2m/6ft LC to LC fiber patch cable multimode duplex has a 50/125μm high rated fiber cladding, 850/1300nm Wavelength, 2.0mm fiber cable diameter and environmentally friendly LSZH fiber jacket. This high quality 50/125μm OM4 multimode LC to LC fiber patch cables ensure a more stable and efficient network for you..
  • 【Wide Usage】OM4 MMF is the preferred fiber specification for 40G Ethernet connections. OM4 LC to LC Multimode Duplex Fiber patch cords is specially designed for connecting 10G SR, 40G BIDI SR, QSFP+, SFP+ transceivers etc, ideal for 10G/40G/100G Ethernet connections. RamboCables OM4 LC-LC optic fiber patch cables help saving more space for your high density cabling in data centers, enterprise networks, telecom room and any places patch cables are needed..
  • 【Transmission Distance】OM4 LC to LC fiber patch cables have a 4700 MHz·km @850nm bandwidth, allow for 10Gb Ethernet transmission distance of 400Meters at 850nm wavelength.
  • 40Gb Ethernet transmission distance of 350Meters at 850nm wavelength.
  • 100Gb Ethernet transmission distance of 125Meters at 850nm wavelength..
  • 【Why to Choose】OM4 LC to LC multimode fiber optic patch cables are Constructed with LSZH environmentally friendly ....
Check Stock

WeldingCity 100-amp 10-ft Air-cooled MIG Welding Gun Torch Stinger Replacement for Miller Millermatic MIGmatic M-Series M-100/M-10 (248282)

  • Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal..
  • M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Referenced part number from Miller: 248282 (M-100/10-ft).
  • Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A.
  • Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

TRENDnet 12-Port Gigabit PoE+ Smart Surveillance Switch, TPE-3012LS, 8 x Gigabit PoE+ Ports, 2 x Gigabit Ports, 2 x SFP Slots, 110W PoE Budget, Managed Switch, Long Range PoE+ up to 200m (656 ft)

  • ...HECK: Feature that attempts to recover an unresponsive PoE device connected to the switch. If a device(ex. PoE camera) is unresponsive, the switch auto-reboots the PoE port attempting to recover the device.
  • POE POWER: Each PoE+ managed ONVIF switch supplies up to 30W of power per port and data over a single Ethernet cable to PoE devices.
  • HARDWARE DESIGN: Provides gigabit PoE+ ports, SFP slots for fiber connectivity, and a 1U 19” rackmount design with brackets included.
  • SURVEILLANCE MODE: ONVIF switches are optimized for the surveillance industry, proving a graphical dashboard interface with useful information about the switch and each connected device.
  • 4 DIGIT POE LED DISPLAY: 4-digit 7-segment LED display to view total power, available power, and power-per-port.
  • TRAFFIC MANAGEMENT: Managed switch features include: Link aggregation, 802.1Q VLAN, Voice VLAN, Surveillance VLAN, RSTP, MSTP, Loopback Detection, QoS, and port bandwidth management.
Check Stock