ReviewsSfp Connector

1.25G/2.5Gbps Two Ports SFP OEO Mode Converter, SFP Repeater (without Transceiver)

[How to Use] Singlemode and Multimode converted by transceivers, Dual Fiber and Single Fiber converted by transceivers, SFP to CWDM SFP converter..
[Multirate] Support for SFP transceivers with data rates from 100Mbps to 2.5Gbps through two SFP slots. (Important: Use matching speed modules in SFP1 and SFP2 only.).
[Protocol Transparent] Compliant with all protocols, as long as the data rate is correct..
[Easy Installation and Use] Modulization configuration design, support hot-swappable, plug and play. LED indicators for P1, P2, POWER can dynamic feedback link connection state and fault detection to easily monitor network status..
[Warranty] 3-year warranty and lifetime technical support..

Check Stock

6COM 2Pack 10GBase-T SFP+ Transceiver SFP+ RJ45 Copper Module for Cisco SFP-10G-T-S Ubiquiti UF-RJ45-10G Netgear D-Link Supermicro TP-Link up to 30m

Strong Compatibility - fit for Cisco SFP-10G-T-S, Ubiquiti UF-RJ45-10G, Netgear, D-Link, Supermicro, TP-Link..
10GBASE-T SFP+ RJ45 Copper Transceiver - 10G rate, RJ45 Copper connector, support links up to 30m over Cat6a/ Cat7..
Easy to use & Durable - Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from....
High Quality - All of products are manufactured under strict quality control system, every module has been tested one by one on different switches....
After-sales Service - 30 days Free-Returned, 3 years Free Warranty and lifetime technology support, please contact us, any product quality and....

Check Stock

MokerLink 8 Port 10Gbps SFP+ Switch, Support 1G SFP and 10G SFP+, 160Gbps Bandwidth, Fanless Unmanaged Plug and Play Ethernet Switch

10 Gigabit SFP+: 8 x 10Gbps SFP+ ports, enable high-bandwidth connected, auto-adaptive 1G/2.5G/10G optical fiber module, wider rate range.
160Gbps Bandwidth: switching capacity is 160Gbps, all ports can achieve non-blocking 10G line speed forwarding.
Open SFP: Support standard SFP interface optical module, no encryption, such as multi mode, single mode, SFP to RJ45 Modules.***No include SFP module***.
Plug and Play: Unmanaged simple setup, with no software to install or configuration needed. LED indicators can clearly show the status and rate of the port.
Widely Used: Metal case, fanless design, quiet and stable operation, suitable for high-speed and long-distance fiber transmission.

Check Stock

Fortinet FortiWiFi-50E-2R License 1 YR 24X7 FortiCare and ATP FC-10-W502R-928-02-12

Fortinet Ruggedized, 4 x GE RJ45 ports, 2 x GE SFP slots, 2x DB9 Serial. Max managed FortiAPs (Total / Tunnel) 2 / 2.

Check Stock

MikroTik CRS328-4C-20S-4S+RM

Cloud Smart Switch 326-24G-2S+RM is SwOS powered 24 port Gigabit Ethernet switch with two SFP+ port.
It gives you all the basic functionality for a managed switch, plus more.
Allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields.
SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.

Check Stock

Mikrotik RB260GSP 5 Gigabit Ethernet Ports and One SFP Cage

24 Gigabit ports, 2 SFP+ cages and a desktop case – server room power for your home!.
Provides: port-to- port forwarding, MAC filtering, VLAN configuration, traffic mirroring, bandwidth limitation and even adjust some MAC and IP header fields..
SFP+ cage supports both 1.25G SFP and 10G SFP+ modules..
Dual boot option allows to use either the lightweight SwOS or the advanced RouterOS..

Check Stock

TRENDnet 10 Gigabit PCIe SFP+ Network Adapter, Convert A PCIe Slot Into A 10G SFP+ Slot, Supports 802.1Q, Standard & Low-Profile Brackets Included, Compatible With Windows & Linux, Black, TEG-10GECSFP

10G SFP+: 10G SFP+ PCIe adapter provides one SFP+ slot for high speed 10 Gigabit fiber connectivity.
CONVERT A PCle 2.0 x4 SLOT: The SPF adapter converts a free PCI Express slot into a 10 Gigabit SFP+ slot..
VLAN SUPPORT: IEEE 802.1Q tagged-based VLAN support.
COMPATIBLE OPERATING SYSTEMS: The SFP+ adapter is compatible with Windows, Windows Server, and Linux operating systems..
JUMBO FRAME: The 10G SFP adapter sends larger packets, or jumbo frames (up to 16 KB), for increased performance.
BRACKETS INCLUDED: The 10 gigabit network adapter supports most installations and comes with standard and low-profile brackets.
ADDITIONAL SUPPORT: Microsoft Scalable Networking, Receive-side scaling (RSS), Message Signaled Interrupts (MSI), IP, TCP, and UDP checksum offloading, Minimize overhead with reduced host bus traffic and CPU utilization.

Check Stock

StarTech.com PCI Express Gigabit Ethernet Fiber Network Card w/Open SFP - PCIe GbE SFP Network Card Adapter NIC - Fiber Optic SFP Adapter (PEX1000SFP2)

Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
PCIe GbE Fiber Network Card with Open SFP Slot.
Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
Compatible with most Gigabit SFP modules.
Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
Includes low-profile/half-height installation bracket.
Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.

Check Stock

Wiitek SFP+ to RJ45 Copper Modules, 10GBase-T Transceiver Compatible for Cisco SFP-10G-T-X, Ubiquiti, Netgear, Mikrotik, Unifi (Cat 6a/7 or Better, 30-Meter)

WIDE COMPATIBILITY:This 10G Copper SFP+ Transceiver is 100% compatible for Cisco SFP-10G-T-X, Ubiquiti, D-link, TP-LINK, Supermicro, Netgear, Mikrotik, Unifi and Other Open Switches, connecting 10g ethernet Switch, Edge Router, media converter.
CABLE DISTANCE:10GBase-T SFP Module supports Links up to 30m using Cat 6a/7 or Better Cable , works for 5GBase-T, 2.5GBase-T using Cat 6a/7, and 1000Base-T using Cat 5e cable or better(10G SFP+ Ports).
PROTOCOLS: 10Gb RJ45 SFP Compatible SFF-8431 and SFF-8432 MSA , IEEE 802.3az.
Each Module is individually 100% tested on the 10G RJ45 Ethernet Switch before delivery.
HOT SWAPPABLE:Hot-swappable transceivers that plugs into an 10Gb SFP+ port,plug and play,no need to power down if installing or replacing.
SUPPORT: 30 Days Free-returned, 3-year Product Quality Assurance, Free Lifelong Technology Support..

Check Stock

SenFend Dual-Band for Intel 8265AC 8265NGW 2.4G 5G Bluetooth 4.2 NGFF M2 Wireless Network Card WiFi Card for Most laptops That with NGFF/ M2 Slot and PC with M.2 mainboard

10G SFP+: 10G SFP+ PCIe adapter provides one SFP+ slot for high speed 10 Gigabit fiber connectivity.
CONVERT A PCle 2.0 x4 SLOT: The SPF adapter converts a free PCI Express slot into a 10 Gigabit SFP+ slot..
VLAN SUPPORT: IEEE 802.1Q tagged-based VLAN support.
COMPATIBLE OPERATING SYSTEMS: The SFP+ adapter is compatible with Windows, Windows Server, and Linux operating systems..
JUMBO FRAME: The 10G SFP adapter sends larger packets, or jumbo frames (up to 16 KB), for increased performance.
BRACKETS INCLUDED: The 10 gigabit network adapter supports most installations and comes with standard and low-profile brackets.
ADDITIONAL SUPPORT: Microsoft Scalable Networking, Receive-side scaling (RSS), Message Signaled Interrupts (MSI), IP, TCP, and UDP checksum offloading, Minimize overhead with reduced host bus traffic and CPU utilization.

Check Stock

Linksys WMP54G PCI Wireless Adapter Refurbished

QUAD SFP+ ADAPTER: 4 ports on SFP+ network card can provide redundancy, or be aggregated for demanding applications.
TECH SPECS: 10 Gbps per port | 4 SFP+ Ports, MSA Compliant | Intel XL710| MMF & SMF Fiber Support | PCIe 3.0 x8 | PXE Boot | 9K Jumbo Frames | Link....
TESTED & VERIFIED PERFORMANCE: We use Spirent SmartBits to validate performance.
converged network adapter is compatible w/ leading servers like Dell....
FLEXIBLE: Use MSA compliant SFP+ module or direct attach cable (DAC) supporting different fiber types.
10 Gigabit Ethernet NIC works w/leading brands....
WIDE HYPEVISOR & OS COMPATIBILITY: Fiber LAN card compatible w/Windows 7, 8, 8.1, 10.
Windows Server 2008 R2, 2012, 2012 R2, 2016, 2019.

Check Stock