ReviewsShaded pole Geared Motor

Family Sew FS-388 9\ Flat Bed Straight Stitch and 5mm Zigzag Portable Walking Foot Sewing Machine With Metal Parts for Upholstery

Cleated positraction belts combine with new geared hand wheel pulley, geared reduction pulley and geared motor pulley to eliminate slipping.
Special heavy duty motor attached up to 150 watts, 1.5 amps, twice as much as home sewing machines.
High lift walking foot with 1/4" clearance underneath the foot.
Uses standard upholstery needles: 135x17, size 22, 20, 18, etc..
Power: 6600 RPM, 150 watts, 1.5 amp motor.

MANUAL HYDROPONICS PUMP: For submersible use only.
this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter.
SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated.
BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection.
removable screen protects the impeller and motor.
Portable and compact weighing 7 lbs. with built-in carry handle.
SPECIFICATIONS: 1/6 HP, 1500 GPH, 115-Volt, 25-foot cord, manual operation, 2.0 running Amps, 220 Watts, 26-foot shut-off, 11.43 PSI.

MANUAL UTILITY PUMP: For submersible use only.
this pump is equipped with a 10-foot power cord, 1-inch FNPT discharge and 3/4-inch garden hose adapter.
SUBMERSIBLE PUMP: Typical applications for the 5-MSP pump include commercial, industrial, and home uses where liquid must be transferred or recirculated.
BUILT TO LAST: constructed of epoxy coated die-cast aluminum with a 1/6 HP permanently lubricated shaded pole motor with thermal overload protection.
removable screen protects the impeller and motor.
Portable and compact weighing 7.75 lbs. and equipped with a built-in carry handle.
SPECIFICATIONS: 1/6 HP, 1200 GPH, 115-Volt, 10-foot cord, manual operation, 5.0 running Amps, 380 Watts, 26.3 Ft. Shutoff, 11.4 PSI.

Mounts are thick 2mm metal bent into an L shape. spot-welded 2 little triangle-shaped wedges in the corners. Ideal for replacement applications..
Stepper motor bracket durable alloy steel provides strong bearing pressure when printing..
Nema17 brackets are 2 long slots so you could easily loosen screws, tighten the belt tension of the motor and belt, and tighten them back down easily..
Stepper motor alloy steel mounting bracket can match standard Nema 17 stepper motor, and also include the mounting holes for Nema 17 economy planetary geared stepper motor but not for high precision planetary geared stepper motor..
6 pcs of NEMA 7 stepper motor mounting brackets, 90 degrees L-shaped bracket there are 4 holes drilled to mount for 3D Printer Motors Nema 17 Stepper Motor 42-40 Motor..

Specification: size: 8inch, voltage: 110V, frequency: 60Hz, power: 120W, air velocity: 745CFM, speed: 2600RPM, noise: 69dB..
High tech design: the aerodynamically designed centrifugal impeller is driven directly by rotor of that delivers strong air flow, moves air through target location efficiently for optimal ventilation, to minimize noise and extending service life..
Saves space: built-in junction box which greatly saves space. Made of high-quality metal, strong and sturdy..
The control switch for 3 settings: speed adjuster has variable speed, OFF, HIGH, MED, LOW. To avoid the risk of burning out the fan motor, controller does not adjust below 50%. It is NOT suitable for shaded pole motor and brushless motor fan..
Package including: 8inch 745 CFM inline ventilation fan, 1* 350W speed adjuster controller..

AUTOMATIC SUBMERSIBLE SUMP PUMP: designed for compact sump systems with integral diaphragm switch activates when water reaches 4 to 7 inches and shuts off when water drops down between 1.5 and 3.5 inches.
BUILT TO LAST: Epoxy-coated cast iron housing.
nitrile/carbon/ceramic mechanical shaft seal.
CONTINUOUS DUTY MOTOR: 1/3 HP shaded pole motor, 9.0 running Amps, 14.3 starting Amps, 720 Watts, thermally protected, CSA listed in the USA and Canada.
APPLICATIONS: designed for compact sump pump systems and general water transfer application. Must sit in water to activate the switch..

【STABLE OPERATION】The 6W geared motor can reach the speed of 27RPM, thus ensuring stable operation. The motor has low noise, long service life and flexible installation..
【SPEED CONTROLLER】The single-phase motor also has a reduction gear box and a governor. The governor has a large torque and a variety of optional speeds. You can adjust the speed according to different products to achieve the desired effect..
【MAIN PARAMETER】Rated voltage: AC110 V.
6W geared motor：88 * 60 * 50mm / 3.4 x 2.3 x 1.9in (Appr.).
Reducer size: 43 * 60 * 50mm / 1.7 x 2.3 x 1.9in (Appr.).
【WIDE APPLICATION】The geared AC motor has a built-in precision stator and pure copper coil, which is stable, reliable and fast in heat dissipation. It is widely used in packaging, printing, textile, food, construction machinery and other industries..
【GUARANTEE】We are committed to providing you with high-quality customer service, please tell us if you receive our product with any unpleasure, we will try our best to help you as soon as we could..

Wide variety of applications: If you do not have a grow tent, do not fret as this controller can be applied to many situations. These can include but are not limited to greenhouses, kitchens, bathrooms, and many other HVAC set ups.
Safety and protection: When it came to your grow, your safety and protection is of the upmost importance. Featuring an easily removable fuse, this device is protected in the event of power surges and item malfunction.
One switch for 3 settings: ‘H’ ‘M’ ‘L’. Make it easy to adjust the speed of your inline fans and duct fans.
Specs: Built-in grounded plug for safe operation.
voltage/frequency: 120V/60HZ. Amperage: 15A.
Note: This controller is not suitable for shaded Pole motor and brushless motor fan.