ReviewsShaft Axle

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

WADEKING WHW Bike Pegs 4.3\ Length,Suitable for 14mm Axles, Freestyle BMX Bicycles,Durable and Stylish Non-Slip (Black 1)

  • Craft: Use quenching to enhance the strength of aluminum alloy and prevent thread striping. Better grip, increased foot friction and reduced slippage..
  • Dimensions: 110mm * 35mm (4.33in * 1.37in),Suitable for 14mm axles.first, measure whether the axle size data of your bicycle is consistent..
  • Installation method:Mounted on the rear axle of the bicycle to ensure that the shaft is longer than 0.5 cm. If the length of the bicycle axle is too short. It is necessary to remove the screws on the shaft and then install the pegs on the shaft, which is more secure..
  • Function: Suitable for front and rear axles, Convenient tool for picking up another person by bicycle, Support your feet..
  • Material: Made of high quality aluminum alloy, high strength & wear resistant.
Check Stock

10 x Replacement Hinge Axle Spindle for Game Boy Advance SP GBA SP

  • Flip-Open Screen Shaft Hinge Axle Repair Parts for Gameboy Advance SP DIY.
  • 10 x Flip-Open Screen Shaft Hinge Axle for Gameboy Advance SP DIY.
Check Stock

VGEBY RC Driveshaft Axle, Driveshaft Axles CVD Upgrade Accessory Fit for Traxxas E?Revo Summit RC Car Model

  • High Processing Accuracy-- The RC automobile drive shaft bridge adopts powerful CNC machining, has a 45 hardened carbon steel structure, and has high machining accuracy, stability and reliability..
  • Ensure Long Service Life and Best Performance-- The RC car transmission axle can be used to replace the plastic front or rear axle of the original drive to ensure a long service life and optimal performance..
  • Strong Polishing Performance-- The RC automobile drive shaft bridge is beautiful in appearance, convenient and practical, strong in light transmission, and good in polishing performance. It is an excellent model car upgrade part..
  • Simple Installation and Removal-- The RC car drive shaft bridge is easy to install and disassemble, has a wide range of uses, and can update and modify your remote control car and improve its performance..
  • Quality Hardened Steel Material-- The RC car transmission axle is made of high-quality hardened steel, which has higher wear resistance and strength, and is more durability..
Check Stock

Kinbelle Rear Axle Shaft Kit 740mm w/Brake Assembly Sprocket fit for Go Kart Quad Drift Trike

  • This is a high class and durable live axle kit for rebuild go kart Quad or Trikes. Fit for many 50cc 70cc 90cc atv quads..
  • This is a complete rear axle kits for gokart which is perfect for DIY gokart projects or rebuilds..
  • Shaft Overall Length (from end to end): 740mm (29 1/8").
  • The thickest part of the shaft is 22mm (7/8") Chain and Sprocket: T8F 58T.
  • Package includes :1*Rear Axle Kit 1*brake assembly 1* Pair of pillow blocks 1* T8F 58T Chain.
Check Stock

Spicer 52765 Axle Shaft Seal

  • GREAT APPLICATION -003e003eThis 8885B Axle Shaft Seal Installer Set great fits for Chrysler Dodge and Jeep Ram Truck 1500 2500 3500..
  • FUNCTION -003e003e Use this special tool to install the Inner Axle Shaft Seals to their Proper Depth in the new 9 1/4" American Axle. (NOTE:Using extreme pressure lubricant on the face of the installers and the shoulders of the spreader bar will ease installation and reduce friction while using this tool.).
  • PREMIUM MATERIAL -003e003e Made of CNC Billet Aluminum/steel, excellent solid and durable with great rust and corrosion resistance for years of trouble-free use..
  • HOW TO USE -003e003e Part of this installer is used with various adapters for current applications. Do not use power tools. Breakage due to use of power tools voids your warranty..
  • GUARANTEE- If you're not 100% satisfied with our products, simply return it for a full refund in 30 days, no questions asked money back guarantee. Premium Support & 1 Year Warranty..
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

Wheel Knuckle Vacuum Oil Seal Installer- Automotive Axle Tools for Ford 2005-2020 F-250/F-350

  • GREAT COMPATIBILITY - Custom-fitted, similar to OTC 6697, work on 2005 to current Ford F-250 F-350 4X4s with the vacuum-operated front axle.
  • SUPERIOR MATERIAL - Made with high standard GB 40CR alloy steel, resisting rust and impact, ensures reliable long-term service.
  • EFFECTIVE FUNCTION -Ensure proper and undamaged installation of the seal, both onto the axle shaft and into the wheel knuckle, prevents front hub....
  • EASY INSTALLATION - Easy to install, directly and correctly installs the seal onto the axle shaft and into the wheel knuckle, makes final assembly....
  • SATISFACTION GUARANTEE - If you're not 100% satisfied with this Install tool, simply return it for a full refund in 30 days, no questions asked money....
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

Kool Stop BMX Threaded Brake Shoe, Black

  • Craft: Use quenching to enhance the strength of aluminum alloy and prevent thread striping. Better grip, increased foot friction and reduced slippage..
  • Dimensions: 110mm * 38mm (4.33in * 1.5in) thickness 3mm (0.12in). Suitable for 3/8 inch shaft x 26T front and rear axles.First, measure whether the axle size data of your bicycle is consistent..
  • Specification：Suitable for both front and back wheel axles of bicycle.But it does not meet the thread diameter of 14mm or more..
  • Installation method: If the length of the bicycle axle is too short. It is necessary to remove the screws on the shaft and then install the pegs on the shaft, which is more secure..
  • Function: Ordinary bicycle, which allows you to sit on the bicycle and support your feet. BMX/mountain bikes are not suitable for standing for a long time, and more are to protect the shifting gear from scratching..
Check Stock

Bentolin 6695 Axle Shaft Seal Installer Compatible for 1998-2004 F250 F350 F450 F550 Excursion 4X4 Wheel Knuckle Vacuum Oil Seal Tool

  • It Compatible for 1998-2004 F250 F350 F450 and F550 4X4s having the vacuum-operated front axle.
  • Made of Heavy Duty Steel with great strength and durability, rust-resistance.
  • Ensure the seal is installed properly and undamaged, both onto the axle shaft and into the wheel knuckle, prevents front hub vacuum leaks that would....
  • Correctly installs the seal onto the axle shaft and into the wheel knuckle..
  • Solid and steel construction, coated with black oxide finish, to ensures reliable long-term service.
Check Stock