ReviewsShaft Encoder

Ochoos 1pcs D30 L40 CNC Flexible Jaw Spider Plum Coupling Shaft Coupler 5/6/7/8/9/10/11/12/14/16 - (Inner Diameter: 14mm to 16mm)

  • Package Includes: Flexible Shaft Coupling Coupler 5mm -16mm  D=30mm,L=40mm | Note: The color of the item may vary slightly due to photography and your own computer.
  • Shaft coupler suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

Antrader 6-Pack 5mm to 8mm Aluminum Alloy Flexible Shaft Coupling Joint Connector Rigid Stepper Motor Wheel Coupler with Screw

  • Clamp-style mount for secure attachment to shaft.
  • Accommodates angular, and parallel misalignment.
  • Aluminum hubs for light weight, stainless steel discs for strength.
  • Shaft couplers suitable for connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

HiLetgo 10pcs TTP223B Capacitive Touch Switch Module Touch Sensor Switch Digital Capacitive Touch Sensor Switch DC 2~5.5V

  • Model: incremental rotary encoders, AB two phases.
  • Connection: white = A phase, Green = B phase, red = power +, black = 0V Note: AB two -phase outputs must not be connected directly to VCC, otherwise, they will burn the output transistor..
  • Output: AB two -phase quadrature output rectangular pulse, the circuit output is NPN open collector output type ,the output of this type can and with additonal added pull-up resistor(not included) is directly connected MCU or PLC.
  • Encoder size: 38 x 35.5mm/1.49" x 1.39"(D*H).
  • Package content :1 x Incremental Rotary Encoder.
Check Stock

Jutagoss 1Pcs Miniature Gear Motor GA12-N20 DC Gear Motor 6V 1000RPM Encoder Speed Velocity Measurement Mini Car Balance Motor

  • 【High Quality】-The gear motor is made of metal gear.
  • Good toughness impact resistance the quality of the bearing and the service life of the gear motor are improved extremely durable.
  • 【Feature】-You can also easily mount a wheel on the motor's output shaft.
  • 【Application】-Great replacement for the rusty or damaged DC geared motor.
  • Widely used in Intelligent remote Control car.
  • 【Package】-1 Pcs GA12-N20 DC Geared Motor with Encoder Test wire.
Check Stock

Magic&shell 2-Pack D19xL25 Shaft Coupler Aluminium 3D Printer Parts Accessory CNC Stepper Motor Encoders Engraving Machine Z Axis Flexible Shaft Coupling 10-10mm

  • Type: 2pcs 3D Printer Shaft Coupler, Coupler Diameter(D): 19mm, Coupler Height(L): 25mm, Top Shaft Diameter: 10mm, Bottom Shaft Diameter: 10mm,....
  • Material: Made of high quality aluminum alloy, integrated molding, oil, rust and corrosion resistance..
  • Function: Flexible metal coupler helps for compensating radial, angular and axial deviations. With the function of buffering, damping and improving....
  • Feature: Zero clearance transfer motion, exactly the same clockwise and counterclockwise rotary characteristics..
  • Use: Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

Magic&shell 2-Pack D19xL25 Shaft Coupler Aluminium 3D Printer Parts Accessory CNC Stepper Motor Encoders Engraving Machine Z Axis Flexible Shaft Coupling 6-8mm

  • Type: 2pcs 3D Printer Shaft Coupler, Coupler Diameter(D): 19mm, Coupler Height(L): 25mm, Top Shaft Diameter: 6mm, Bottom Shaft Diameter: 8mm, Mounting....
  • Material: Made of high quality aluminum alloy, integrated molding, oil, rust and corrosion resistance..
  • Function: Flexible metal coupler helps for compensating radial, angular and axial deviations. With the function of buffering, damping and improving....
  • Feature: Zero clearance transfer motion, exactly the same clockwise and counterclockwise rotary characteristics..
  • Use: Often used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

6.35x6.35mm CNC Flexible Coupling Motor Shaft Coupler 1/4\ to 1/4\ Shaft

  • Shaft: 6.35mm x 6.35mm,Length: 25mm,Diameter: 20mm.
  • it is widely used to connect servo motor, stepper motor, encoder, screw driving, machine platform, etc..
Check Stock

Heyiarbeit 5pcs 4mm to 4mm 2 Section Rotatable Universal Joint Coupling Shaft Stepper Motor L52xD12 U Joint Coupler Connector with Screw for RC Model Motor, RC Robot, DIY Encoder, CNC Machine

  • [Total Size] - Outer Diameter: 12mm / 0.47".
  • Connection Diameter: 4mm to 4mm / 0.16" to 0.16".
  • [Material] - This universal coupling is made of premium iron metal material, which is durable and has a long service life, fine workmanship.
  • [Feature] - The universal joint of the purpose is to firmly connect the driving shaft and the driven shaft to rotate together and transmit motion and torque, cost effective coupling design, which is very flexible and easy for use, and is great replacement for your old or broken one.
  • [Design] - Rotatable design. Allow the angle between the two axes within a limited range vary with operational needs, and easy to set up the items on the shaft and control the holding capacity of the coupling.
  • [Wide Application] - Universal joint coupling are used in servo motor systems, 3D printer, cnc machine, diy encoder, spindle transmissions, stepping motors, lifting platforms, machine tool transmissions, stepping motors, encoders, screw drives, machine platforms or gearboxes, etc.
  • Great suitable for short support shaft, bushing model, miniature Shaft, model airplane/ boat/ car.
Check Stock

12mm x 8mm CNC Flexible Plum Coupling Shaft Coupler Stepper Motor Encoder Connector Coupler D20 L30 Jaw Clamp Aluminum Alloy

  • APPLICATION: Couplings are usually used to connect servo motors, stepper motors, encoders, screw drives, machine platforms, etc. A great choice for you..
  • STABLE PERFORMANCE: The performance of this coupling is stable and reliable, with good shock absorption, cushioning and electrical insulation properties..
  • HIGH-QUALITY MATERIAL: Plum coupling shaft is made of high‑strength aluminum, it has excellent carrying capacity and long service life without lubrication. You can use it with confidence..
  • LIGHT WEIGHT: The plum blossom coupling encoder has small radial size and light weight, which is suitable for medium and high‑speed equipment. Its quality is guaranteed..
  • PRACTICAL: Flexibility of coupling shaft removes stress between the motor and driving components. Bring you a new and different using feeling..
Check Stock

Volodymyr Zelenskyy - Sixth & Current President of Ukraine - 8inch Bust

  • 6V or 12V 30:1 Metal DC Geared-Down Motor 37Dx67.5L mm, with 64 CPR Encoder and Metal Mounting Bracket Kit, D-shaped Output Shaft 6mm Diameter and Long 16mm.
  • No-load Speed: @ 6V: 115 RPM, @ 12V: 330 RPM.
  • Stall Torque: @ 6V: 7.5 kg.cm (101 oz.in), @ 12V: 14 kg.cm (190 oz.in).
  • for Projects Such as Robots, Measuring Devices, Medical Equipment, Smart Balance Car, RC Car Model, Smart Home Appliance, Custom Servo, DIY Engine Toy. Compatible with Arduino Motherboards..
Check Stock

Sinoblu 12 to 24mm D55 L78 Motor Shaft Coupling, Aluminum Flexible Spider Coupling, Jaw Shaft Coupler Connector for Stepper Motor 3D Printer DIY Encoder/CNC Engraving Drilling Milling Machine

  • Size:Diameter 55mm Length 78mm/Diameter 2.17inch Length 3.07inch. Bore 12mm to 24mm. Type: Plum shaped.
  • Material: Using Aviation Aluminum with corrosion resistance High Hardness, High Precision, Anodized Surface Treatment, Strong and Durable. Spider Material (Elastomer) Uses T-PUR, Longer Service Life.
  • Super Torque: Can Absorb Vibration, Appropriate a Large Torque Transmission.High Hardness,Durable,and Excellent Response,Not Easy to Loosen.
  • Vibration-damping: Flexible Spider Couplings Offset Angular, Radial and Axial Shaft Displacement Within Defined Ranges. The Elastomer Dampens Shock and Torsional Vibrations in The Drive Train.
  • Wide Range of Usage: Flexible Shaft Couplings is Suitable to Offset Axial, Radial and Angular Displacements and Dampen Vibrations and Torque Shocks for 3D Printer DIY Encoder CNC Router Machine Servo Stepped Motor and Engraving Drilling Milling Machine.
Check Stock