ReviewsShaft Gears

Yukon Gear & Axle (YPKD30-S-27) pider Gear Kit for Dana 30 Standard with27-Spline, Black

  • Engineered to Fit Specific Differential Applications.
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Check Stock

Accurate Platinum TwinDrag ATD 80W Reel - Silver - Right Handed

  • Four Class 5 ABEC stainless steel bearings.
  • Calibrated lever drag for accurate drag setting.
  • 17-4 heat treated stainless steel gears and gear shaft.
  • Larger, stronger gear shaft for increased torque.
  • Unhindered sleeved free-spool at every drag setting.
  • Patented direcshift 2-speed mechanism for instant engagement.
Check Stock

Honda 08208-0080 Pro Shaft Drive Oil

  • PERFORMANCE – Used in shaft drive or separate clutch transmissions for optimum performance and gear longevity.
  • PROTECTION – Provides maximum gear protection against wear, corrosion, and oxidation all while maintaining optimum performance.
  • PEACE OF MIND – Meets or exceeds API GL-5 / MT-1 & SAE J236.
  • HARSH CONDITIONS – Protects against harsh conditions wearing the surface of the gears.
  • FITS EVERYTHING – For use in shaft drive or separate clutch transmission applications.
Check Stock

Accurate Boss Fury FX-500X Reel - Right-Hand - Silver

  • Four Class 5 ABEC stainless steel bearings.
  • Calibrated lever drag for accurate drag setting.
  • 17-4 heat treated stainless steel gears and gear shaft.
  • Larger, stronger gear shaft for increased torque.
  • Unhindered sleeved free-spool at every drag setting.
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set (2 or more gears) should be replaced together for smoothly drive..
Check Stock

USA Standard Gear (ZIKC8.25-S-29) Open Spider Gear Set for Chrysler 29-Spline 8.25 Differential

  • USA Standard Gear open spider gear set for Chrysler 8. 25", 29 spline.
  • Includes Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust Washers.
Check Stock

UJIKHSD High Speed 4WD 1/10 RC Rally Racing and Drift Car for Adults and Kids, 80KM/H On Road Remote Control Car RC Truck 2.4Ghz RTR Vehicle RC Crawler

  • The design of the steering cup header is a good design that greatly reduces the collision failure rate. When the vehicle collides with excessive force, the header and the steering cup will loosen and disengage without damaging the steering cup or the lower swing arm..
  • The gears use 0.8M mold (32DP) to withstand large torque, and the driving gears, planetary gears, and large bevel reduction gears are all made of high-strength steel, which is stable and durable..
  • The motor compartment and the vertical transmission shaft have transparent dust-proof covers, which not only prevent dust and sound insulation, but also prevent sand and gravel from entering the gears and causing damage to the gears. It is suitable for beach cars..
  • The new design adopts a box-type frame structure, and a 3mm aluminum alloy chassis is used at the front and rear, which combines rigidity and flexibility. Taking into account high strength and light weight..
  • Excellent performance in off-road, mountain roads, beaches, etc., good shock absorption performance, and has a body posture when turning!.
Check Stock

Yukon Gear & Axle (YPKM35-S-27-1.5) Standard Open Spider Gear Kit for AMC Model 35 with 27-Spline Axle

  • Engineered to Fit Specific Differential Applications.
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Check Stock

Yukon Gear & Axle (YPKD44-S-30) Replacement Standard Open Spider Gear Kit for Dana 44 Differential with 30-Spline Axle

  • Engineered to Fit Specific Differential Applications.
  • Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Check Stock

Bicycle Derailleur Hanger Alignment Gauge Tool, Stainless Steel Bike Repair Tool Straightening Tool for Derailleur Hanger Alignment Gauge

  • [Material] Bicycle derailleur hanger alignment gauge tool made of durable stainless steel, it is sturdy, corrosion-resistant and rust-proof..
  • [Function] Essential workshop tool that can be used for both measuring and straightening wrong shift brackets, solving a high proportion of shifting problems.
  • [Features] Improved large inner shaft for added strength, Tighter tolerances for improved accuracy..
  • [Universal] product size 410*165mm. it works for most all kinds of size of wheel..
  • [Proper shifting] A misaligned derailleur hanger can cause shifting issues such as difficulty shifting gears or the chain jumping between gears. Aligning the hanger ensures that the derailleur moves the chain smoothly between gears, allowing for efficient and reliable shifting..
Check Stock

USA Standard Gear (ZIKGM8.6-S-30V2) Spider Gear Set for GM 8.6 Differential

  • For Standard open on a 2000-2006 GM8.6” Rear End. This spider gear set fits ’00-’06 V2 carriers ONLY, with carrier casting numbers 7875 or 1073. Measures 2.8 inch across between side gear mounting surfaces.
  • Includes Two Side Gears, Two Pinion Gears, Cross Pin Shaft, Cross Pin Bolt and Spider Gear Thrust Washers.
Check Stock