ReviewsShaft Inner

10 Pcs Shaft Collar Electroplate Ferronickel Shaft Lock Collar Ring Carbon Steel Hex Fixed Buckle DIY Technology Making Model Toys (5.1mm)

  • EASY TO USE: The shaft collar can be used for blocking position for the shaft and steel wire. When installing the wheel, use the wheel block to lock the inner limit or the periphery of the wheel to lock the steel wire or the landing gear axle. When the wheel is rotated, it does not run off..
  • REUSABLE: The locking shaft collar adopts carbon steel hex fixed buckle, can be used repeatedly without breaking..
  • HIGH EFFICIENCY: Pattern edge of lock shaft collar makes the knob rotation easier, which can improve work efficiency, save time and energy..
  • COMPACT SIZE: The shaft collar assortment adopts appearance plating process, no rust, no scratch, which is compact design for easy portability and storage..
  • PACKAGE: Including 10 pcs shaft collar to meet your quantity needs, very practical in work and life, can bring you more convenience..
Check Stock

2Pairs ShareGoo Front & Rear Steel Drive Shaft Transmission Axle Compatible with Traxxas Slash 4X4 Nitro Rustler VXL Stampede 4X4 1/10 RC Car Truck Silver

  • The front and rear drive shaft compatible with Traxxas Slash 4X4 / Platinum / Ultimate / VXL 4x4 4WD Hoss 4X4 VXL Rustler 4X4 VXL Stampede 4X4 VXL....
  • The slash drive shaft are made of high quality steel material ,the hex wheel hub is made of aluminum alloy,durable in use..
  • Shaft Length Range:110mm-140mm/4.33''-5.51''.
  • Hex Wheel Hub Color:Blue/Silver(Optional).
  • Upgrades parts,designed for lasting performance,improves the overall performance of your rc car..
  • Package includes 2Pcs universal front drive shaft and 2Pcs rear drive shaft & 4Pcs wheel hex hub.The built-in anti-separtion design, reduce the....
Check Stock

FOREDOM SHEATH Part S-77 FLEX SHAFT MOTORS STANDARD OUTER SHEATH 36-1/4\ LONG (E 8)

  • FOREDOM SHEATH S-77 OUTER FLEX SHAFT MOTORS SHEATH 36-1/4" LONG.
  • FOREDOM 77 Original 36-1/4" LONG OUTER SHEATH REPLACEMENT PART- tandard models. This outer Sheath is for use with S-93 key tip inner shafts sold separately. NOTE: last picture show Shaft and Grease which can be purchased at our store. A Foredom flexible shaft motor Maintenance-Replacement Part. FOREDOM Item Number: S-77.
Check Stock

CNBTR Yellow 3MM Hole Dia Brass Gear Shaft + 31MM OD 60 T Brass Gear Wheel 0.5 Modulus Set

  • Size 1: Brass Gear Wheel: 0.5 Modulus, 60T, Hole Diameter: 6mm/0.24inch. Size 2: Brass Gear Shaft: 0.5 Modulus, Outer Diameter: 9.7mm/0.38inch, Inner Diameter: 3mm/0.12inch..
  • The transmission structure of gear shaft is simple, compact, small volume and light weight. Easy to install and use..
  • Shaft Z1=1, turn a round of gear T, can get a large transmission ratio, generally in the power transmission, the transmission ratio I=10-80, like big transmission ratio, if use with gear transmission, will need to take the multi-stage transmission..
  • The item contains one 0.5 modulus 3mm hole dia brass gear shaft and one 60T brass gear wheel..
  • Made of brass material, not easy to wear, durable and lasting performance. This gear wheel & shaft are the excellent industrial replacement accessory..
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while resisting rust and corrosion.
  • Inner CV axle removal tool has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
Check Stock

Lidscura 8PCS Motorcycle Bearing Pullers 9-23mm Motorcycle Internal Bearing Removal Tool Kit Inner Bearing Extractor Kit

  • Widely Application: This Remover tool kit is ideal for internal bearing removal of automotive flywheel, motorcycle wheel, bicycle wheel, pump bearing generator bearing, machine bearing etc..
  • Meet Your Different Needs: Internal bearing Extractor tool set is equipped with 5 different sizes of open clips. The bearing can be disassembled from 0.35inch(9mm) to 0.91 inch(23mm) inside diameter..
  • Fine Workmanship: This motorcycle bearing pullers set is made of high-quality chrome vanadium steel, strong and durable for for a long service time..
  • Easy to Use: Connect this bearing puller kit with 1/2" 3/4" male thread water faucet, open clamps by turning handle clockwise to snug against the bearing for taking out the inner bearing..
  • Instructions for use: First the tool head into the inner ring of the bearing, and then screwed into the shaft, the tool head propped open hooked bearing inner ring, and then turn the shaft, you can pull out the bearing.
Check Stock

WAFJAMF 4 Pcs 0.67 Microwave Turntable Coupler Microwave Oven Turntable Roller Guide Support with D Port Shaft Length 0.67 / 1.7cm

  • 【NOTE】This is "NOT UNIVERSAL". Please pay attention to the size of this product,Make sure the size is right for your microwave oven before buying..
  • 【High Quality Microwave Turntable Coupler】100% brand new, Made of high temperature PPS material, durable and long life span..
  • 【Replacement Part for Mcrowave Oven】Great choice to replace the old or broken one..
  • 【Size】Shaft length : 0.67''/17mm, shaft outer diamater 0.43"/11mm, shaft inner diamater 0.196"/5mm..
  • 【What You Get】4 PCS Microwave Oven Turntable Plate Tray Shaft Couplers..
Check Stock

G4Free Golf Bag Umbrella for Club Protection Flex Umbrella (Black)

  • 360° Direction Canopy. Convenient flex spring top in shaft allowing the canopy pivot in any angle to easily access your golf club and quickly pullback for protection..
  • Protect Your Clubs. This golf bag umbrella protects clubs in the golf bag against inclement weather. Durable 210T Pongee material with deep canopy design. The top protective inner liner protects your golf clubs from scratching the umbrella frame..
  • Telescopic Umbrella Shaft. Multiple locking sections in the shaft to adjust the shaft to 3 different lengths. Extended max length is 54.3 inch and retract to 45.6 inch. Folded to 36.2 inch for easy storage in golf bag side pockets. Come with an umbrella cover to protect the umbrella canopy..
  • Water Resistant Fabric. Lightweight as 0.7lb. The material of this golf club umbrella is made of water resistant 210T pongee fabric, thick metal shaft, tough fiberglass ribs and molding-in-one tips, making it windproof in the rainy days and hard condition..
  • Ergonomic Rubberized Handle. Classic and elegant looking, sure-grip rubberized material is the best choice for golfer. We will stand for the quality of this umbrella and we provide 12 months warranty on it..
Check Stock

2 Pcs 0.94 Microwave Turntable Coupler Microwave Oven Turntable Roller Guide Support with D Port Shaft Length 0.94 / 24mm

  • High-quality Microwave Turntable Coupler - Made of high temperature resistant PPS material, not easy to scratch, durable, long service life, suitable....
  • Product Size - Shaft length: 0.94"/24mm. Please measure the shaft length before purchasing, shaft outer diameter, and shaft inner diameter of the....
  • Replacement Parts for Microwave Ovens - Excellent replacements for old parts or damage, good microwave oven accessories, make your microwave oven a....
  • Package Include - 2 x microwave oven rotating cores, suitable for rotatable connectors, strong bearing capacity, necessary for the rotation of the....
  • Reminder - As long as the size in the picture is the same, all brands of microwave ovens can be used. (Because of the different measuring methods, it....
Check Stock

Motorcycle Bearing Pullers, 8-Piece Internal Bearing Removal Tool kit from 0.35inch(0.9 cm) to 0.91inch(2.3 cm) in Diameter

  • Material: high quality chrome vanadium steel..
  • This principle is the extension of the external traction tool..
  • The sizes are: 0.35inch(9mm).0.43inch(11mm).0.55inch(14mm).0.74inch(19mm).0.91inch(23mm), Included: five sockets, 3 posts.The bearing can be disassembled from 0.35inch(9mm) minimum inside diameter..
  • Put the head of the tool in the inner bearing ring, then screw into the shaft.The tool head to open, and hook the inner ring of the bearing.Then turn the shaft..
Check Stock

Sydien 4 Pcs 8mm Rigid Flange Shaft Coupling Motor Guide Shaft Coupler Connector with Set Screws & Wrench

  • Metal: Fine plating metal, hardened by heat treatment, and then electroplated..
  • Function: A special coupler, which can fix one shaft to a plane and install other parts on the shaft easily..
  • Package: 4Pcs Flange Shaft Coupling + 1Pc Mini Hex Wrench + 10Pcs Fastening Screw..
Check Stock