ReviewsShaft Pump

4000PSI Pressure Washer Pump Horizontal Shaft 1\ For EB4040HA With Honda Engine

【Reborn Your Pressure Washer】YAMATIC Horizontal Power Washer Pump 3/4" Shaft MAX 3300 PSI / 2.5 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2800-3300 PSI and fit most 208-220cc 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, It is manufactured from fully anodized die-cast aluminum for protection against rust, get 200 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3300 PSI at 2.5 GPM to wash walls, fences, sidewalks, vehicles, and more..

Check Stock

The ROP Shop 3600 PSI Pressure Washer Pump, 2.5 GPM for Dewalt DH3028, DXPW3025, DXPW3425

Replacement 3600 PSI Pressure Washer Pump, 2.5 GPM for Dewalt DH3028, DXPW3025, DXPW3425.
Specs – Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM, 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 3/4″ Horizontal Shaft. Refer to images 2 and 3 for more information.
Pump comes with built in Unloader, Chemical Injector, Thermal Release Valve, & Oil Reader included.
Replaces most pumps with 3/4″ shaft. Mounting pattern is 2 9/16″ center to center.

Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..

Check Stock

Utility Pump Replacement Carbon Brushes,Impeller,Shaft Seal Part for FPOWER Water Transfer pump (1 Set)

Utility Pump Replacement Carbon Brushes,Impeller,Shaft Seal Part for FPOWER Water Transfer pump (1 Set).
Package Content: 2 x Carbon Brushes, 1 x Impeller, 1 x Seal.
Carbon Brush Size (Approx) : 18 x 6 x 6 mm.
Impeller Measures: 1-3/8" Diameter, 1/2" Width with D Shaped Drive Hub for 5/16" Diameter Shaft.
Impeller&Seal are also fits in FPOWER DC 12-Volt Utility Water Transfer Pump.

Check Stock

SANOL Max 3000 PSI Pressure Washer Pump Horizontal 3/4'' Shaft 2.4 GPM Power Washer Pump Replacement For Honda GC190, 309515003,308418007, G3050OHC, 020241 and More

【Reborn Your Pressure Washer】SANOL Horizontal Power Washer Pump 3/4" Shaft MAX 3000 PSI / 2.4 GPM / @3400 RPM, Save money by replacing your pump instead of buying a new power washer. Top performance at 2600-3000 PSI and fit most 196-212cc at 6.5HP-7.0HP engine. Replacement for Simpson, Generac, Homelite, Honda, Karcher and more. ※►Diagonal distance between screw holes is 3 5/8''. ►Hole Distance to hole is 2 9/16''. ►Key width 3/16''. ►Depth 2 5/8''. ⚠ Will not fit 7/8 inch shaft as engine..
【Extended Durability】 High-performance double seal system prevents leakage, upgraded technical surfacing piston and bearing, get 120 hrs running time, longer than OEM power washer pump. And the thermal relief valve (TRV) protects the pump from overheating while in bypass mode. ⚠NOTE: Will not fit 7/8 inch shaft as engine. If you're not sure fit or not, just message us and we will confirm it for you!.
【Maintenance-Free】This pump features a maintenance-free crankcase so you never have to change the gasoline. This easy-to-install kit is great for power washers that can support 3000 PSI at 2.4 GPM to wash walls, fences, sidewalks, vehicles, and more..
【Easy Start】 Built in for simple & quick cold starts to make the startup a breeze, no ....

Check Stock

Hutdkte Pressure Washer Pump for SRMW22G26-EZ 2.2G24, 2.2 GPM 2600-2800 PSI for TroyBilt Karcher Craftsman Generac Fits Most 7/8' Shaft 4-7 HP Engines with Pressure Washer Nozzle

This pump head assembly ready for RMW or SRMW pumps- RMW2G20, RMW2.2G24, RMW2G23B, RMW2G24, RMW2.2G20D, SRMW2.2G26, RMV2.5G24..
Pressure Washer Pump Fits for Troybilt: 1974-2, 1974-0, 1909-0, 1908-2, 1908-0, 1902-1, 1902-0, 1811-0,.
Pressure Washer Pump also Fits for Troybilt,for Devilbiss/Excell, for Craftsman,for Husky And Others Rated at 2800 PSI and 2.4 GPM with 7/8” shaft 4 - 7 HP engines.
Center shaft to each mounting bolt is 4" - Center to Center Spacing Between Mounting Bolts is: 7 11/16" – 6 3/16" - 6 7/16 ..
Package including: 1x 7/8" Shaft Pressure Washer Pump , 1 Black Brass soap nozzle,1 Red Stainless Steel Nozzle Tip (0 Degree),1 Yellow Stainless Steel Nozzle Tip (15 Degree),1 Green Stainless Steel Nozzle Tip (25 Degree),1 White Stainless Steel Nozzle Tip (40 Degree) ..

Check Stock

Star 1/2 HP Submersible Well Pump with Carbon Steel Shell (3 Wire) 4 Inch, 230 Volt, 10 GPM, 4H10G05301

1/2HP 4 Inch submersible well pump with powder-coated and corrosion resistant carbon-steel shell and 1-1/4 Inch discharge that has a built-in check valve that is removable, internal, and positive-sealing.
Rated at 7 GPM water pumping capacity - Great for small homes, cottages and light water usage applications - requires a 4" (10 cm) minimum inside well diameter.
Quiet and economical operation with no priming required - Features a stainless steel motor shell and drive shaft for quiet operation and stainless steel hex drive shaft with one-piece stainless steel motor-to-shaft coupling.
NEMA standard 3 wire motor with ground wire - this 230 Volt well pump requires a control box (sold separately) and comes with a splice kit for completing all electrical connections.
100% Factory Tested - Will pump water from 100 feet.

Check Stock

The ROP Shop 3/4" Shaft, Horizontal Triplex Pump Replacement for Pressure Washer with 3600 PSI and 2.5 GPM, Includes Keyway

The ROP Shop replacement 3/4″ Shaft, Horizontal Triplex Pump for Pressure Washer with 3600 PSI and 2.5 GPM.
Specs – Maximum Pressure: 3600 PSI, Maximum Flow: 2.5 GPM, Maximum Pump Speed: 3500 RPM, 6.5 HP, Male Outlet: 22mm Threaded, Standard Garden Hose Inlet, 3/4″ Horizontal Shaft. Refer to images 2 and 3 for more information.
Pump comes with built in Unloader, Chemical Injector, Thermal Release Valve, & Oil Sight Glass.
When installing, please ensure that the keyway is in place before running your pressure washer.

Check Stock

Little Giant EC-400, 2.5 GPH In-Pan Condensate Removal Pump (115V)

Product 1: AUTOMATIC HVAC PUMP: Ideal for collecting, detecting, and automatic removal of condensate from air conditioning equipment, dehumidifiers, high efficiency furnaces, condensing boilers, and other equipment where automatic drain pump is required.
Product 1: STAINLESS STEEL MOTOR SHAFT: Vertical-type pump features stainless steel motor shaft and galvanized steel tank cover.
Thermally protected motor is UL and CSA listed.
Includes two 1-1/8” diameter inlet openings.
Product 1: PUMP WITH SAFETY SWITCH: Includes safety switch which can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow.
Discharge is a 1/4" FNPT or 3/8" O.D. barbed tubing adapter.
Product 2: SimpleAir’s Clean Flow Tabs are a simple method to maintain free-flowing drain lines associated with all HVAC systems.
Product 2: Unique tablets are time released when water activated.
Product 2: Tabs prevent common growth in drain lines that could lead to clogging of drain lines and overflow.
Product 2: Each tablet lasts up to 2 months.

Check Stock

110V Magnetic Home Brewing System Beer Pump, Food Grade Stainless Steel Head with 1/2'' NPT Thread, Advanced High Temperature Resistance System Pump (Stainless Steel Head)

with 19 LPM (5 GPM) max flow rate, our beer pump can lift max 3.4 m (10 ft)..
No Leak, Good Sealing — Pump shaft is a closed static seal, Splash proof, Greatly avoiding liquid leakage and Achieving excellent sealing, Easier to prime, Amazing liquid circulation beer pump.
The liquid travels from the bottom of the valve into the pump, and once device is powered on (plugged in to outlet), the propeller circulates liquid for maximum flow.
Specifications — 1/2 inch Inlet & Outlet.
Food Grade Stainless Steel — Magnetic pump head with 1/2 inch Thread is made of Food grade 304 stainless steel, High resistance to corrosion, Not easy to get rust, Non-toxic, Environmentally friendly, Lifetime-Using brewing pump.
No Noise, Quiet Operation — Main shaft is separated from the impeller, with damping and anti-Vibration function, Reducing the influence of motor vibration on the pump, Low power consumption, High efficiency,Run smoothly, Excellent Repeatable magnetic pump.
Easy to Use — Prime by running liquid through pump prior to turning on.
Use to dispense beer, treat water, transfer hot water from your kettle to a mash tun, or recirculate mash wort and sparge and transfer to a brew kettle.

Check Stock

The ROP Shop | 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500

The ROP Shop replacement 2400 PSI Power Pressure Washer Water Pump for Excell & Devilbiss VR2400, VR2500.
Specs - Maximum Pressure: 2400 PSI. Maximum Flow: 2.4 GPM. Maximum Pump Speed: 3400 RPM. Shaft Diameter: 7/8". 3 Bolt Pattern: 7 11/16” x 6 3/16” x 6 7/16” & 4" Center to Each Outer Hole. Maximum Water Temperature: 140° F. Inlet Connection Type: Standard Garden Hose. Outlet Tube Connection: 22mm Male. Refer to images 2 and 3 for more information.
Includes - (1) Vertical Pressure Washer Pump with Chemical Injector, Unloader Valve, Thermal Release Valve & Outlet Tube (come installed).
This pump is for vertical gas engine driven units. In some instances, the pump may need to be removed to change engine oil. The mounting flange provides a convenient connection to most 7/8” diameter shaft vertical gas engines in 4.5-7 HP. The pump has a hole in the leg for draining the engine oil. The pump includes a built-in pressure control valve, downstream chemical injection system and thermal relief valve.

Check Stock