ReviewsShaft Seals

All Balls Racing 28-1028 Swing Arm Bearing Seal Kit Compatible with/Replacement for Yamaha

  • Specs: Swing Arm Bearing Kit, Contains: 2 Needle Bearings, 1 Needle Bearing Shaft, 2 Seals, 2 Washers.
  • Complete kits that contain all of the bearing and seals (if required) trepair the swing arm.
  • Compatible With/Replacement For: Yamaha YFZ350 Banshee 1987 - 2009.
  • 1-year warranty protects you after your purchase. We're confident that our products will work flawlessly once installed in your vehicle. In the rare case that it does not, we'll replace it anytime within one year of your order. If you have a problem, we will take every step to assist you. Contact us for a replacement..
  • 100% New aftermarket Swing Arm Bearing Kit built to meet OEM specifications.
Check Stock

Garlock 29602-4110 Guardian Goulds 3196LTX Bearing Isolator, Bi-Directional, 1.875\ x 2.750\ x 0.700\ Outboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4107 ISO-Gard Goulds 3196MTX Bearing Isolator, Bi-Directional, 1.750\ x 2.875\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29507-4106 ISO-Gard Goulds 3196STX Bearing Isolator, Bi-Directional, 0.875\ x 1.250\ x 0.625\ Outboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29602-4124 Guardian Bearing Isolator, Durco Mark 3/Group 2, Bi-Directional, 1.875\ x 2.625\ x 0.700\ Inboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29699-0319 Guardian Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.700\ Outboard Side, Bronze

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Provides dust tight protection and heavy water jet spray (26gpm) for pumps. Tested to IP 66 Ingress protection based on IEEE test standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • Bronze construction does not rust and conforms to API 610 standard.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Garlock 29502-4125 ISO-Gard Bearing Isolator, Durco Mark 3/Group 3, Bi-Directional, 2.625\ x 3.677\ x 0.750\ Inboard Side, Blue

  • Designed to directly replace existing labyrinth seals on pumps without modification.
  • Protects pumps against water spray (3gpm) and dust. Tested to IP 55 Ingress protection based on IEEE standard.
  • Non-contact design reduces friction on the shaft reducing energy consumption and prevents shaft grooving.
  • PTFE construction  with excellence chemical resistance.
  • Bi-directional design also prevents leakage of lubrication with a single seal.
Check Stock

Yukon Gear & Axle (YMS8835S) Axle Seal for Differential Bearing, for 1559 OR 6408 bearing, NOT COARSE spline 12T

  • Replacement Axle Shaft Seal Installer - This special tool allows you to install and insert the axle shaft seal of your vehicle in its proper depth, distance and position by driving it in with a rubber mallet or hammer onto the wheel knuckle assembly. This is applicable for your 1999 F-250, 2000 F-350, 2001 F-450, 2002 F-550 and 2003 Excursion 4x4 vehicle..
  • Compatible Replacement for Ford Vehicles - 2000, 2001 , 2002, 2003, 2004 Excursion 4x4 | 98, 99, 00, 01, 02, 03, 04 F250 | 98, 99, 00, 01, 02, 03, 04 F350 | 98, 99, 00, 01, 02, 03, 04 F450 | 1998, 1999, 2000, 2001, 2002, 2003, 2004 F550 |. Replacement of the axle shaft seal is necessary after removal when servicing the front-end parts like the u-joints to avoid having issues when engaging 4WD. Installation can be tricky and with a proper tool like this, it will be perfect everytime..
  • Replaces Part# 6695 commonly found on popular vehicles including year models 1998, 1999, 2000, 2001, 2002, 2003, 2004. This axle shaft seal tool is constructed with high quality steel, black finished and designed with handle and the correct ridges compatible with Ford vehicles. This is applicable to your Excursion 4x4, F-250, F-350, F450 and F-550 vehicles only..
  • OEM Fit, Quality, Finish - While this is not a genuine....
Check Stock

Four Seasons 26777 Cap & Valve Air Conditioning System Seal Kit

  • 【High-quality material】Air Conditioning Compressor Shaft Seal Kit,It is made of high-quality rubber and metal, which has the advantages of anti-aging, oil resistance, corrosion resistance, etc., and has a long duration of use and is not easy to damage..
  • 【Direct Replacement】A/C Compressor Shaft Seal,This seal kit allows you to directly repair the original seals on some vehicle applications, and provides accessory assistance for the daily maintenance and updates of the vehicle, with high adaptability..
  • 【Standard Specifications】A/C Compressor Shaft Seal Kit,Manufactured in accordance with standard specifications, strictly in accordance with the factory quality control, and its performance is stable after multiple tests after installation..
  • 【Easy installation】Automotive A/C Compressor Oil Seal,The accessory installation method is simple, disassemble the original worn-out parts and re-install it, no complicated operation is required, and it is easy to use..
Check Stock

Spicer 52765 Axle Shaft Seal

  • GREAT APPLICATION -003e003eThis 8885B Axle Shaft Seal Installer Set great fits for Chrysler Dodge and Jeep Ram Truck 1500 2500 3500..
  • FUNCTION -003e003e Use this special tool to install the Inner Axle Shaft Seals to their Proper Depth in the new 9 1/4" American Axle. (NOTE:Using extreme pressure lubricant on the face of the installers and the shoulders of the spreader bar will ease installation and reduce friction while using this tool.).
  • PREMIUM MATERIAL -003e003e Made of CNC Billet Aluminum/steel, excellent solid and durable with great rust and corrosion resistance for years of trouble-free use..
  • HOW TO USE -003e003e Part of this installer is used with various adapters for current applications. Do not use power tools. Breakage due to use of power tools voids your warranty..
  • GUARANTEE- If you're not 100% satisfied with our products, simply return it for a full refund in 30 days, no questions asked money back guarantee. Premium Support & 1 Year Warranty..
Check Stock

FAG 2308-2RS-TV Self-Aligning Bearing, Double Row, Double Sealed, Polyamide/Nylon Cage, Normal Clearance, Metric, 40mm ID, 90mm OD, 33mm Width, 5300rpm Maximum Rotaional Speed, 2200lbf Static Load Capacity, 6550lbf Dynamic Load Capacity

  • Self-aligning bearing for applications subject to shaft deflections or misalignments between the shaft and housing.
  • Straight bore for fitting on a conventional cylindrical shaft.
  • Contact seals on both sides of the bearing keeps lubricant in and contaminants out.
  • Glass fiber reinforced polyamide 66 plastic cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal radial internal clearance for applications where thermal expansion is not a factor.
Check Stock