ReviewsShanghai Manifold Factory

Bundle - 4 Items - Clipper Lighter Tie Dye 'Trip 2' Collection

  • Clipper became the first refillable lighter to be launched in the UK in the semi disposable category. Since its launch Clipper has become the world leader and Number 1 consumer brand in refillable lighters. This is primarily due to its instantly recognisable iconic design and high quality specification. Being one of the most prominent brands in the world lighter market, all Clipper Lighters offer the maximum level of guarantee..
  • All lighters are manufactured using only the highest quality raw materials and include safety features such as a fixed flame, nylon body and a Child Resistant mechanism..
  • By using strict quality controls Clipper lighters have complied to and exceeded the strictest international safety standards to ensure the status of all our products, meeting standards that cannot be met by competitors..
  • Clipper lighters are manufactured in factories based in Barcelona Shanghai & Chennai. Each factory is a fully automated facility to ensure that each and every lighter produced is to the same high standard..
Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

  • 【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
  • 【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
  • 【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
  • 【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
  • 【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..
Check Stock

Shanghai Story Girls Chinese Traditional Dress Plum Flower Cheongsam Qipao for Kids 130cm Purple

  • Size chart is in the "Product Description". Please check the Size Chart & Important Note before buying.For actual mesaurements please refere in....
  • Chinese traditional dragon and phoenix pattern,,flower pattern.
  • Shipment from China ,Sold by Shanghai Story ,Please choose for this store name ,Our quality assurance.Standard Shipping(>90% Packages can be delivered....
  • We are Asia size which is usually 1 or 1.5 size smaller than US size .Please check your measurements to make sure the item fits before ordering..
  • Shanghai Story is Asian fashion design from most purchase, not only daily, dance, in their daily work can bring you the best of condition,it for all....
Check Stock

Intake Manifold Runner Control Bushing Set of 5 fits Ford fits Lincoln Mercury

  • Fitment Notes: Fitment Notes5 Piece Set, 2004-07, fits Ford Freestar Intake Manifold Runner Control Bushing.
Check Stock

Replacement Value Exhaust Temperature Sensor Compatible with Jeep

  • Fitment Notes: Fitment Notes003cbr003e[Exhaust Temperature Sensor] Exhaust Manifold DIESEL 003cbr003eQuantity Needed Per Vehicle: 1.
Check Stock

Edelbrock 2181 Performer Intake Manifold

  • Delivers improved throttle response over stock intakes and are available in both EGR and non-EGR styles.
  • When using a 12-bolt manifold on 16-bolt heads, 16-bolt intake gasket is used to ensure proper sealing around the water ports on the heads.
  • Factory composition-type embossed gasket also works satisfactorily.
  • Boosts torque over a wide RPM range, from idle to 5, 500 RPM.
Check Stock

GXP Updated Driver Side Exhaust Manifold & Hardware Compatible with 2001-2016 Chevy/GMC 6.6 LB7 LLY LBZ LMM LML Duramax Diesel

  • Direct Replacement | Eliminates "Crushed" Manifold (2001-2010 Trucks) | GM OE Cross Reference #: 12624684,12637647,97224587 | 1-Year Warranty.
  • High-flow upgrade is only on 2001-2010 trucks..
  • Some factory hardware and fasteners will be re-used during installation..
  • This is a factory-style replacement on the 2011-2016 GM 6.6L Duramax LML..
  • Compatible with all 2001-2016 Chevy & GMC 6.6L LB7/LLY/LBZ/LMM/LML Duramax diesel trucks.
Check Stock

309-05-1050 70mm Alpha Series Throttle Body Skunk 2 for 1988-2005 Ho-nda B/D/F/H Series Acu-ra Integra Engine M/T 309051050 NEWZQ

  • OEM Part Numbers: 309-05-1050, 309051050, 37830-P7A-N11, 37830-P05-A01, 37830-P0G-S00, 37830-PAA-S00, MHK100590, 079800-4250, 550276, 16400P0AA01,....
  • Fitment: 1990-2001 Acu=ra Integra (GS, LS), 1992-2003 Acu=ra Integra (GS-R) ,1994-2001 Acu-ra Integra (GS-R)Require to use Skunk2 Pro Manifold,....
  • Fitments:1996-2000 Hon-da Civic (DX, LX) Require to use Skunk2 Pro Manifold, 1993-1997 Hon-da Del Sol (S, Si), 1994-1997 Hon-da Del Sol (VTEC),....
  • Features: 1. Precision Die-Cast Aluminum.
  • 3. Precision Machined Brass Throttle Plate.
  • All our accessories are professionally tested at the factory. Please make sure the project is suitable for your model. Or feel free to contact us for....
Check Stock

GrowBright OctoCloner 8-Site Aeroponic Cloning/Propagation System

  • Complete 8-site aeroponic cloning machine.
  • Includes: 5-gallon black bucket reservoir, factory-molded 8-site lid, (8) radial-punch neoprene collars, larger 250 GPH pump, manifold stem, (2) 365° rotary sprayers.
  • Electrical (submersible pump): 28 watts, .23 apms @120v.
  • Comes with full instructions including 'how-to-cut-clones guide' and 'tips for success'.
  • Assembled system measures: 14-1/4" Tall x 12" Wide.
Check Stock

Carburetor Intake Manifold Boot Joint for Yamaha Warrior 350 YFM350X 1987-2004, Fit for Yamaha Wolverine 350 YFM350FX 4x4 1995, 1UY-13586-01-00, 1UY-13586-02-00, CNC 6061-T6 Aluminum Alloy

  • 1. Fitment - CNC aluminum alloy carburetor carb intake manifold boot fit for Yamaha Warrior 350 YFM350X 1987-2004, fit for Yamaha Wolverine 350 YFM350FX 4x4 1995.
  • 2. Reference OE Number - 1UY-13586-01-00, 1UY-13586-02-00.
  • 3. Function - Replacing the new intake manifold interface can solve problems such as high idle speed, weak acceleration and easy flameout during acceleratio. The carburetor intake manifold boot replaces the old or broken manifold boot perfectly..
  • 4. Material + Installation - Carburetor carb intake manifold boot made of premium quality rugged design with aluminum alloy material, for extended lifetime, with high temperature resistance, high pressure resistance and other advantages. Easy to install, just replace the old or broken intake manifold interface during installation.
  • 5. Service - We offer CNC aluminum alloy carburetor carb intake manifold boot 2-years shelf life, hassle-free return and money back policy, buy with confidence! any questions about carburetor carb intake manifold boot, please contact us by email, we will reply you within 12 hours, you will get a brand new CNC aluminum alloy carburetor carb intake manifold boot.
Check Stock

Dewhel Turbo Boost Gauge Diesel Boost Bolt Adaptor for Dodge Ram 5.9L Cummins 24V 1998-2007

  • Replaces the Factory Bolt on Intake Manifold Allowing You To Easily Install Your Boost Pressure Sensor.
  • Fit For 1998.5-2007 Dodge Ram With A 24 Valve 5.9L Cummins Motor.
Check Stock