ReviewsShank Slotter

1/4 Inch Shank Router Collet Extension Rod Chuck Holder Extender Adapter Woodworking Milling Bit Convert 1/2-Inch & 1/4-Inch Shank Bits with ER20 Spring Collet 6.5mm 12.7mm, ER20 M Type Wrench Spanner

  • Made of high quality material, durable and practical to use.
  • High strength, good toughness, strong shock resistance. Make you more efficient to process products, suitable for woodworking trimming, milling, engraving machine..
  • Shank Diameter: 1/4"(6.35mm), Accept Shank Size: 1/4" & 1/2" Shank, Extend Length: 2-1/4".
  • This router collet extension chuck accepts both 1/4" and 1/2" shank router bits for converting and extending. Extend the bit to provide the full depth of cut and eliminate the dangerous..
  • Easy to Use- Place the router collet extension shank in the 1/4-inch router collet and the router bit shank in the extension collet and tighten both.
  • M Type ER20M wrench included. Need M Type ER20M wrench to tighten the collet..
  • Eliminate the dangerous temptation of withdrawing the shank from the collet, extend the bit to provide the full depth of cut instead of short shanking your router bits. Widely used, boring, milling, drilling, silk attack, sculpture, CNC, and other processing, for professionals and hobbyists demanding..
  • Package including: one 1/4 Inch shank collet extension, one ER20 6.5mm Collet, one ER20 12.7mm Collet, one M Type ER20M wrench.If you're not satisfied with our products for whatever reason, just contact us, we will try our best. Do not....
Check Stock

INTOO Drill Bit Set 21 Piece 1/16'-1/2' Quick Change Impact Driver Bit Set

  • Specifications: 21pcs titanium drill bits set, include 1/16X2,5/64X2,3/32X2,7/64X2,1/8X2,9/64,5/32,11/64,3/16,13/64,7/32,15/64,1/4,5/16,3/8,1/2 with 1/4 hex shank.
  • Highlights: Special plug hex shank of quick change drill bit is an upgrade version, it shows excellent performace than normal pressed hex shank, avoid drills peeling from the hex shank, effectively keep hex shank locked with drill bits during impact drilling process..
  • Characteristics:135° split point not only promises cutting speed,but also prevents slipping when start drilling；Titanium coating increases the ware-resistance and durability, effect long life drilling. Non-disposable packing makes sure the drills well stored..
  • Quick change: 1/4 inch hex shank of hex bit set well fits all power tools,especially for locking into quick change chucks,suitable for makita drill and makita impact driver, dewalt drill bits set,milwaukee drill bit set,effects quick change more easily and securely..
  • Widely used: industry grade high speed steel drill bit sets with high hardness, can be widely used in Steel, Wood, Plastic, etc. Ideal for DIY, home and general building/engineering using.Ideal impact drill bit set and drill bits for metal..
Check Stock

TINVHY C1-ER32-100L Straight Shank Collet Chuck Holder CNC Milling Tool Holder Alloy Steel Chuck Holder 25.4 mm shank Holder

  • 25.4 mm shank holding all ER32 collets (Clamping range up to 20mm).
  • Milling lathe collet chuck holder, high grade DN65 carbon steel material, straight shank, clamping nut, toughened and precision ground.
  • C1 ER32 Straight shank type extended handle, the handle body was longer. The surface is quite smooth which offers a comfortable feeling and nice appearance.
  • Widely used in boring, milling, drilling, tapping, grinding and other processing.
Check Stock

100% Grass Fed Beef Shank 4 Pack – 2lbs Each Pack– Delicious & Healthy Natural Beef Meat, Protein & Omega-3 Rich, Hormone-Free & Non-GMO, Juicy & Ready, Classic American Slow Cooker & Braising Choic

  • DISCOVER THE ULTIMATE AMERICAN BEEF SHANK! – Finally, you can enjoy the real deal! The Mount Pleasant Beef classic American beef shank is here to become the center of attention at your next family dinner, 4th of July, BBQ or Father’s Day party!.
  • 100% GRASS-FED, HEALTHY & MOUTH-WATERING BEEF SHANK! – Our natural and grain-free beef shank comes from 100% grass-fed cows, which roam freely in our Estrella Ranch in Texas! That’s why our meat contains NO hormones, NO GMO’s and NO harmful antibiotics! What you get is pure, genuine grass-fed cow meat!.
  • THE CORNERSTONE OF EVERY BALANCED DIET! – The Mount Pleasant Beef premium, natural and delicious grass-fed beef shank is extremely rich in Omega-3 to Omega-6 fatty acids and the all-important linoleic acid (CLA) which is absolutely crucial for a balanced and healthy diet!.
  • SAVOUR EVERY MOMENT OF YOUR BRAISED SHANK! – We utilize an innovative flash-freezing process in order to seal in all the flavour and juices immediately after production. So, you can rest assured that your beef shank is ready to cook right out of the package! All you have to do is start braising!.
  • HERE’S THE STAR OF YOUR MEAL! – You deserve juicy, healthy and mouth-watering grass fed ground beef shank for your friends a....
Check Stock

0.27 Caliber Green Shot Strip Loads, Power Fasteners Actuated Powder Loads (100-Count)

  • Washer pins - powder fastener actuated fastening system, Increases bearing surface against the material to be fastened..
  • Shank diameter = .14Shank diameter = .145.
  • Meets the requirements of toughness and durability that enable them to penetrate dense concrete and structural quality steel.
Check Stock

Malco MALCOMBO1 2 in. C-Rhex Cleanable, Reversible Magnetic Hex Driver, 4 Piece Set

  • 1-Each Of The Following Mshcm2, Mshcm1, Mshc1 & Mshc.
  • 1- Of Each Reversible 8Mm/10Mm Hex Shank In 2-Inch Length, Reversible 6Mm/10Mm Hex Shank In 2-Inch Length, Reversible 5/16-In & 3/8-In Hex Shank In 2-Inch Length, Reversible 1/4-In & 5/16-In Hex Shank In 2-Inch Length.
Check Stock

Malco MALCOMBO2 4 in. C-Rhex Cleanable, Reversible Magnetic Hex Driver, 4 Piece Set

  • 1-Each of the following MSHMLCM2, MSHMLCM1, MSHMLC1 & MSHMLC..
  • 1- Of each reversible 8mm/10mm hex shank in 4-inch length, reversible 6mm/10mm hex shank in 4-inch length, reversible 5/16-in & 3/8-in hex shank in 4-inch length, reversible 1/4-in & 5/16-in hex shank in 4-inch length..
Check Stock

Sandvik Coromant LF123E059-16B Steel CoroCut 1-2 Shank Tool for Parting and Grooving Holder, 0.1\ Maximum Depth of Cut

  • CoroCut 1-2 1.000" Square Shank External Machining - Shank Tools.
  • Square Shank Parting and Grooving Holder CoroCut Tool Holder.
  • Clamp screw: 3212012-259 Key 5680043-14 Coolant Nozzle Additional spare parts.
Check Stock

COMOWARE 29-Piece Drill Bit Set, High-Speed Steel Black and Gold Finish with 135 Degree Split Point Tip, 1/16' to 1/2' x 64ths Increments

  • Versatile general-purpose drill bit set,High-speed steel (HSS) and gold oxide finish resists corrosion and increases the hardness of the drill bit..
  • Assortment of 29 jobber length drill bits (1/16" to 1/2" in 1/64" increments)..
  • Shanks fit standard three-jaw drills,and use in drilling wood,plastic and Light-gauge metal..
  • Three unique shank styles keep bits securely seated to save you time and frustration. 1/16"-11/64" is round shank, 3/16"-3/8" is three flatted shank, 25/64"-1/2" is 3/8" reduced shank and three flatted shank..
  • ORGANIZED HOLDER- Set includes the drill bit holder with size index for easy storage and organizing..
Check Stock

ATE PROFESSIONAL SOLID COBALT HEX SHANK QUICK CHANGE DRILL BIT SET 32073 13pc

  • HSS Titanium Coating - Jefe Hex Titanium (TIN) coated Drill Bit can offer 3 times longer life than drill bits without coating..
  • Hex Shank - 1/4 inch Hex shank can be fit in quick-change chuck easily. And it can transit high torque from power tools to the working part of drill bit. Hex shank also eliminates the frustration of shank spinning in chuck. There is an ENHANCED TAPERED WEB in the drill bit that greatly increases the drill bit's strength and reduces premature breakage..
  • Accuracy - 135° split point geometry ensures accurate start and reduces walking on the working surface. Solid bonding technology eliminates radial runout and improves concentricity. High torque, Impact-rated..
  • Multi-Function - Jefe Hex drill bits are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Ideal for use in steel, copper, aluminum, zinc alloy, cast iron, wood and plastics..
  • Package & Size - 13 Pieces drill bits in a double blister pack with easy opening design. 135° Split- point, hex shank drill bits..
Check Stock

Sandvik Coromant RF123G079-16B Steel CoroCut 1-2 Shank Tool for Parting and Grooving Holder, 0.421\ Maximum Depth of Cut

  • CoroCut 1-2 1.000" Square Shank External Machining - Shank Tools.
  • Square Shank Parting and Grooving Holder CoroCut Tool Holder.
  • Clamp screw: 3212012-310 Key 5680043-15 Coolant Nozzle Additional spare parts.
Check Stock