ReviewsShank Tool

1PCS Deburring External Chamfer Tool, 1/2'to 1 2/5' (13mm-36mm) Bolt Deburring Tool Stainless Steel Remove Burr Tools HSS Blade Deburring Quickly Repairs Tool for Steel, Copper, Brass, Wood

【Steel Material】The handle material of the deburring tool is chrome vanadium steel, the shell is zinc alloy, and the alloy cutter head, high hardness and durable, It has safe and efficient cutting capabilities, suitable for Hexagon Shank External Chamfer.
【Fits Your Tools】 Deburring Quickly Repairs tool Fits for 1/2"to 1 2/5" (13mm-36mm)，3/4-inch hex shank on external deburring drill bit fits your 0-400 RPM drills.
Before using the Deburring tool, use oil to improve the tool performance.
【Efficiently Safety Design】The hexl shank deburring tool can be tightly connected with the head drill, and it has sharp teeth inside, which can cut bolts safely and effectively, quickly repair damaged bolts and tighten nuts in place, without hurting hands and producing no sparks.
【Operation simply】You can attach a deburring external chamfering tool to the end of a power drill and apply light pressure at the lowest speed to remove the burrs. You don't need to look for replacement bolts, deburring tools repair damaged bolts and improve work efficiency, A good helper for home tools and factories.
【Widely Application】Deburring tools have strong cutting and repairing capabilities and are very effective in deburring, Deburring External Chamfer Tool effecti....

Check Stock

1/2\ Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 1/4\ Shank Diameter, 3 Flutes, 2 3/4\ OAL, (.5\ Diameter), 52216, USA Made

For counterboring and spotfacing in applications where machine requires a smaller shank.
1/64" Corner Radius, Tool Diameter Tolerance: +.001"/-0". Shank Diameter Tolerance: +0"/-.001".
Pilot Hole Diameter:1/8, If using a pilot this is the shank diameter of the pilot you should choose.
Minimum Cut Diameter: .156" Because there is a pilot hole the tool will not cut below this diameter..
Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit).

Check Stock

Accusize Industrial Tools 5/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2005

Model of each holder & the original insert: MGEHR10-3B (insert: MGMN300).
SCLCR10-3B & SCLCL10-3B (insert: CCMT32.5).
SDNCN10-3B & SDJCR10-3B (insert: DCMT32.5).
Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
*** Insert kit Item#: 2387-2005INSERTS (Sold Separately on Amazon)***.

Check Stock

6 Color Drill Extension Bit Holder 1/4inch Hex Shank Aluminum Alloy Screwdriver Bits Holder Extension Bar Drill Screw Adapter Change Keychain Portable 2022 Upgraded

[Save Much Time] -- Great tool to keep track of different drill bits. Hang right on the tool bag. Its all together that it will much easier to do....
[1/4 Inch Hex Shank Screwdriver Bits Holder] -- This only works for drill bits with a 1/4 inch hex shank. Bits are also easy to remove and place back....
[Aluminum Quick Connect Easy to Use] -- Hex shank drill bits extension bars are very accessible, it can clip it to about anywhere! you can connect to....
[Black Metal Hanging Buckle] -- The key-chain adopts a sleek, thick design, sturdy and endurance, the powerful ball lock buckle can carry tools up to....
[Specification] -- Material: Aluminum alloy. Color: Black, Red, Gold, Green, Blue, Silver. Package includes: 6 x Hex Shank Screwdriver Bits Holder, 1....

Check Stock

3M Mini Mandrel 935, 2-7/8 in x 1/4 in

Grips abrasive allowing you to reach tight internal diameters.
Versatile mandrel holds a 1inchwide strip of ScotchBrite nonwoven material, cut to the length needed for the application.
Shank of the mandrel is secured into the collet assembly or drill chuck of a rotary power tool.
Shank fits a 1/4 inch power tool collet or drill chuck.

Check Stock

Utoolmart Round Shank Twist Drill Bits 1.5mm High Speed Steel 4341 with 1.5mm Shank 10 Pcs

【Size】- Cutting Edge Diameter : 1.5mm / 0.06 inch.
【High Speed Steel Tool】- High-speed steel straight shank tool is good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
【Round Shank】- Round shanks allow use with a wide variety of toolholding systems.
【Uncoated Tools】- Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications.
【Versatile Uses】- For use in a wide range of stainless steel, aluminum alloy, iron, copper, brass and metal materials.

Check Stock

1 1/4\ Aircraft Counterbore, Carbide Tipped, (Reduced Shank Counterbore), 3/8\ Shank Diameter, 3 Flutes, 2 3/4\ OAL, (1.25\ Diameter, 1-1/4), 52240, USA Made

For counterboring and spotfacing in applications where machine requires a smaller shank.
1/64" Corner Radius, Tool Diameter Tolerance: +.001"/-0". Shank Diameter Tolerance: +0"/-.001".
Pilot Hole Diameter:1/4, If using a pilot this is the shank diameter of the pilot you should choose.
Minimum Cut Diameter: .281" Because there is a pilot hole the tool will not cut below this diameter..
Set screw to hold a pilot or drill bit in place (if you are using a pilot or drill bit).

Check Stock

Toolly 3/8'' Shank 7 Pcs Indexable Carbide Turning Tool Set, Indexable Turning Tool Holder, C6 Carbide Inserts

Black oxided smooth finish on each turning tool holder style and shank size..
Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..

Check Stock

Simple Combination Mini Quick Change Tool Post Kit Set For CNC Table/Hobby Lathe Aluminium Material

Fits 7x10, 7x12 and 7x14 mini lathes, ACCEPT - Turning Holder: 1/4-3/8" Shank.
Using the dial, each tool holder can be rotated multiple angle of 9 ° or 9 °, operations with extension units,can be processed various angles work piece..
Mounting hardware include 2x mounting bolts (M8 & M10) 2x Allen Key.
Holder include: Two turning tool holders, a boring tool holder, a cut-off blade holder..

Check Stock

Accusize Industrial Tools 3/8'' Shank 7 Pc Indexable Carbide Turning Tool Set in Fitted Box, 2387-2003

Black oxided smooth finish on each turning tool holder style and shank size..
Each tool holder comes with a C6 TiN coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
Insert screws and wrench included. 7Pcs indexable turning tool holder. 7Pcs TiN coated C6 carbide inserts. 7Pcs hex screws. 3Pcs hexagon keys..
Details, recommended cutting speeds and specifications are in the description.

Check Stock

5/8\ 2PCS CNC Lathe Carbide Indexable Threading Turning Tool Holder SER1616H16 + SEL1616H16 with 2PCS 16ER/IR AG60 BP010 Indexable Carbide Turning Insert Blade

PACKAGE INCLUDES : You will receive 1 pieces SER1616H16 5/8”/16mm shank diameter lathe turning tool holder , 1pcs SEL1616H16 5/8”/16mm shank diameter lathe turning tool holder,1pc 16ER AG60 threading carbide turning insert,1pc 16IR AG60 threading carbide turning insert and 2pcs T15 wrenches..
Material : The SER/L1616H16 5/8” metal lathe cutting tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The 11ER A60 threading turning inserts material is carbide, and the coating is Nanostructured TIAIN, It has good toughness, wear resistance and high temperature resistance, the carbide insert can uesd for processing steel..
Turning tool holder size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
Threading carbide turning insert :Processing : 60°general thread insert, processing pitch range: 0.5mm - 3mm..
If you need more inserts,you can search for ASIN:B07FFR8K53(16ER AG60) or B07FFPFT93(16IR AG60) ..

Check Stock