ReviewsShear Bolts

Amsec C7 STAR Safe Round Lift Out Door Tubular Body Floor Safes

  • Manipulation resistant, unitized U.L. Group II key changeable lock protected by a revolving carburized hardplate..
  • Removable dial and drive/drill resistant spindle preventing damage from burglary attack and additional protection from hold-up..
  • Door is securely locked by three bolts each requiring over 25,000 pounds to shear..
  • Door, 7-1/4" clear opening, is 1-3/4" solid steel..
Check Stock

Amsec EST916 Compact Electronic Burglary Safes

  • Manipulation resistant, unitized U.L. Group II key changeable lock protected by a revolving carburized hardplate..
  • Removable dial and drive/drill resistant spindle preventing damage from burglary attack and additional protection from hold-up..
  • Door has a 7-1/4" clear opening, and is 1-3/4" solid steel. Door is securely locked by three bolts each requiring over 25,000 pounds to shear..
  • Body — Heavy “B” rate construction..
  • Water resistant, high impact molded dust cover with rubber “O”-ring seal does not rattle or slide like most covers..
Check Stock

Titan Attachments 55\ Collapsed Length PTO Shaft, Shear Bolt Included, 1-3/8-In. x 6 Spline on Both Ends

  • Compatible with Titan Series Offset Flail Ditch Bank Mowers.
  • 43-inch collapsed length, measured from end to end.
  • 55.1-inch extended length, measured from end to end.
  • Quick-disconnect 1-3/8-in. x 6 spline on both ends.
Check Stock

Titan Attachments 35.5\ Collapsed Length PTO Shaft, Shear Bolt Included, 1-3/8-In. x 6 Spline on Both Ends

  • Compatible with Titan Series Flail Mowers with Hydraulic Side Shift.
  • 35.5-inch collapsed length, measured from end to end.
  • 49.6-inch extended length, measured from end to end.
  • Quick-disconnect 1-3/8-in. x 6 spline on both ends.
Check Stock

Titan Attachments 31.5\ Collapsed Length PTO Shaft, Shear Bolt Included, 1-3/8-In. x 6 Spline on Both Ends

  • Compatible with Titan Series Flail Mowers, Wood Chippers, and Finish Mowers.
  • 31.5-inch collapsed length, measured from end to end.
  • 43-inch extended length, measured from end to end.
  • Quick-disconnect 1-3/8-in. x 6 spline on both ends.
Check Stock

Titan Attachments 71\ HD Collapsed Length PTO Shaft, Shear Bolt Included, 1-3/8-In. x 6 Spline on Both Ends

  • Compatible with Titan Series Offset Flail Ditch Bank Mowers.
  • 70.8-inch collapsed length, measured from end to end.
  • 108.1-inch extended length, measured from end to end.
  • Quick-disconnect 1-3/8-in. x 6 spline on both ends.
Check Stock

SHALL 5/16” (8 mm) Fiber Cement Siding Shear Blades Replacement Set, for Shall Electric Fiber Cement Siding Shear (SH111007AE), Clean Cut for Cement Board, Tile Board, Backer board

  • Product dimension: Left blade & right blade: 4-7/8” X 3/14’’ (12.5 cm X 1.9 cm).
  • center blade: 5-5/8’’ X 2’’ (14.3 cm X 5 cm).
  • hex bolts length: 1-7/16’’ (3.6 cm). Compatible with SHALL (SH111007AE) and other electric fiber cement siding shear that have the same structure and size of cutter head.
  • Cutting capacity: Cutting up to 5/16” (8 mm) cement board, tile board, backer board and etc. In addition, applicable for cutting cement board, hardie backerboard, shower backerboard, waterproof backerboard and so on. Multi-functional, meeting most of your cutting needs.
  • Double-cut blade: Double cut design for creating a 5/16” (8 mm) curled thin strip, delivering fast clean cut without creating extra wastes and air-borne dust, smooth as silk. Besides, this replacement’s advantages are flexibility in cutting curves, efficiency, accuracy, durability and quality finish.
  • Premium material: Blades are made of superior alloy steel, anti-rusting. Heat-treated: 55-60HRC. High strength bolts (Specification: M5, Strength: 12.9).
  • What including: 3 blades (left blade, center blade, right blade), 2 bushings, 3 head bolts.
Check Stock

Amsec C3 STAR Safe Round Lift Out Door Tubular Body Floor Safes

  • Manipulation resistant, unitized U.L. Group II key changeable lock protected by a revolving carburized hardplate..
  • Removable dial and drive/drill resistant spindle preventing damage from burglary attack and additional protection from hold-up..
  • Door has a 7-1/4" clear opening, and is 1-3/4" solid steel. Door is securely locked by three bolts each requiring over 25,000 pounds to shear..
  • Body — Heavy “B” rate construction..
  • Water resistant, high impact molded dust cover with rubber “O”-ring seal does not rattle or slide like most covers..
Check Stock

Klein Tools K11095 Klein-Kurve Wire Stripper and Cutter, for 8-18 AWG Solid and 10-20 AWG Stranded Wire

  • Wire Stripper with six precision ground stripping holes for 8-18 AWG Solid and 10-20 AWG Stranded wire.
  • Narrower head geometry gets into hard to reach places.
  • Screw shearing holes for 6-32 and 8-32 bolts and precision, shear-like blades that provide clean cuts.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 30 mm | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum - providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock

Monstrum Pro Series 7075 Aluminum Scope Rings | 1 inch | Medium Profile

  • Monstrum Pro Series scope rings are crafted from 7075 aerospace aluminum – providing greater tensile strength, shear strength, and Brinell hardness than typical 6061 aluminum scope rings.
  • Comes with stainless steel Torx mounting hardware, including a T25 Torx Plus wrench and a T25 Torx Plus Bit, for easy precision mounting without stripping of bolts.
  • Pro Series scope rings are treated with a Type III Hard Anodized Finish versus a Type II for previous generation scope rings for added protection against scratches and blemishing.
  • Available in 1 inch or 30 mm diameter. Compatible with both Picatinny or Weaver mounting bases..
  • All Monstrum products are now protected by Monstrum’s lifetime guarantee.
Check Stock