ReviewsSheave Pulleys For Sailboats

Dial Steel Silver Fixed Motor Pulley

  • Removable Axle & Sheave For Easier Rigging.
Check Stock

STIGA Premium 72\ Regulation Table Tennis Net and Post Set - Easy Set up With Spring Activated Clip

  • 1750lb (795kg) Safe Working Load for lower sheave.
  • 350lb (159kg) Safe Working Load for upper sheave.
Check Stock

BELT IDLER PULLEY RANGE SPORT 14-19 RANGE 13-19 3.0L & 5.0L LR036304 OEM

  • Designed for use with rope or cord in indoor and outdoor applications.
  • Can be rigged as a block and tackle to reduce line pull.
  • Zinc die-cast body with solid brass sheave.
Check Stock

Hardware Essentials 852494 Double Sheave Fixed Pulley (1-1/2\), Gray

  • Zinc die cast sheave and steel body with zinc finish.
Check Stock

US Cargo Control 4190 Snatch Block with Shackle (3/8 Inch Wire x 3 Inch Sheave)

  • Dimensions: 3/8 inch wire x 3 inch sheave.
  • Wire Rope Diameter: 3/8" | Sheave Diameter: 3".
Check Stock

US Cargo Control 4190 Snatch Block with Shackle (1/2 Inch Wire x 4.5 Inch Sheave)

  • Dimensions: 1/2 inch wire x 4.5 inch sheave.
  • Wire Rope Diameter: 1/2" | Sheave Diameter: 4.5".
Check Stock

Genuine Gates 36113 DriveAlign Belt Drive Idler/Tensioner Pulley

  • Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.Additional hardware included with most idler pulleys to make installation easier..
  • Original Equipment (OE) Exact - Looks and fits just like the OE Bearing meets or exceeds OE specifications and is designed for application-specific speed and load requirements.
  • Steel or thermoplastic construction provides high durability for extended life.
  • Industry's best light-duty coverage and consistently first to market for late model application coverage.
  • Vibration damping system extends life of tensioner and other accessory components.
Check Stock

BTG Gear Two Boat Dock Line Snubbers for 1/2 -3/4 14-18mm Marine Mooring Ropes

  • SHOCK ABSORBERS FOR YOUR CLEATS & LINES: With BTG Gear’s mooring snubbers, you’ll reduce the stress put on your lines by allowing the rubber....
  • EASY TO USE & EVERYTHING INCLUDED: No additional hardware is needed. Simply attach the lines to your snubbers and experience the immediate benefits..
  • FOR POWERBOATS & SAILBOATS: Great for use with both sailboats and powerboats..
Check Stock

OEMTOOLS 27031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

OEMTOOLS 37031 Power Steering Pulley Puller and Installer Kit, Removes and Installs Power Steering Pump Pulleys on Most Domestic Vehicles, Ford, GM, VW , green

  • POWER STEERING PULLEY INSTALLER AND REMOVER: Our power steering pulley tool is designed to remove and install power steering pump pulleys on most domestic vehicles.
  • Power steering pulley remover pulls pressed-on water pump pulleys of GM V6 engines.
  • WORKS WITH MANY VEHICLES: This power steering pump pulley tool comes with two screws for use on most Ford, Chrysler, GM, and VW power steering pulleys with Saginaw, Thompson and Ford C111 and C2 pumps.
  • Pulls pulleys on GM belt-driven vacuum pumps.
  • HEAVY-DUTY POWER PULLER: The pulley clamp and removal screws in this OEM pulley puller installer kit are composed of rugged steel for long-lasting strength and durability.
  • Power steering pump pulley installer designed to tackle any small pulley job.
  • CONVENIENT STORAGE: Our power steering puller and installer set comes in a molded carrying case for safe storage and easy portability.
  • Take this power steering pump puller/installer from job to job while keeping your puller kit organized.
  • PRODUCT SPECIFICATIONS: Pulls any pulley with hub diameters measuring 1-1/8, 1-1/4, 1-5/16, or 1-3/8 inches.
  • Pulls pulleys on GM belt driven vacuum pumps.
  • Pulls pressed-on water pump pulleys of GM V6 engines.
Check Stock

VEVOR 2ton Snatch Block with Chain 4400 lbs Capacity Snatch Rigging Block 3 Single Sheave Block w/Swivel Hook G70 Chain Fit 3/8 Wire Cable Heavy Duty for Pulling Wrecker Roll Back Recovery

  • 4400 LBS loading Capacity: The working load capacity is up to 4400 lbs, able to lift and tow heavy loads. 3'' sheave size, fitting for 3/8" wire cable. 10'' x 3'' in dimension is compact for easy storage. Chain Size: 31.5 inch * 5/16 inch..
  • Steel Frame with Chain: Built by heavy-duty steel with a powder-coated finish, our snatch block pulley system has better immunity to corrosion and rust. Also, our high-strength G70 chain with grab hook won’t wear out from rust over time..
  • 3-Inch Single Sheave: Smooth single sheave protects the rope from damaging and saves more effort. It is possible to remove one side by taking the pin off, slip in the winch cable, and change your pulling direction to pull a vehicle out of an awkward place..
  • 360° Rotation: Adopt a one-piece casting process.
  • the cable pulley block features the swivel shackle for great convenience and enhanced security. The built-in security device avoids accidental falling..
  • Wide Application: Our snatch block pulley is widely used to do the lifting, towing, recovery, and rigging jobs outdoor and indoor, ideal for factories, warehouses, garages, shipbuilding, engineering machinery, etc..
Check Stock