US Cargo Control 4190 Snatch Block with Shackle (1/2 Inch Wire x 4.5 Inch Sheave)
- Dimensions: 1/2 inch wire x 4.5 inch sheave.
- Wire Rope Diameter: 1/2" | Sheave Diameter: 4.5".
ReviewsSheave Wheel
STIGA Premium 72\ Regulation Table Tennis Net and Post Set - Easy Set up With Spring Activated Clip
- 1750lb (795kg) Safe Working Load for lower sheave.
- 350lb (159kg) Safe Working Load for upper sheave.
BELT IDLER PULLEY RANGE SPORT 14-19 RANGE 13-19 3.0L & 5.0L LR036304 OEM
- Designed for use with rope or cord in indoor and outdoor applications.
- Can be rigged as a block and tackle to reduce line pull.
- Zinc die-cast body with solid brass sheave.
VEVOR 2ton Snatch Block with Chain 4400 lbs Capacity Snatch Rigging Block 3 Single Sheave Block w/Swivel Hook G70 Chain Fit 3/8 Wire Cable Heavy Duty for Pulling Wrecker Roll Back Recovery
- 4400 LBS loading Capacity: The working load capacity is up to 4400 lbs, able to lift and tow heavy loads. 3'' sheave size, fitting for 3/8" wire cable. 10'' x 3'' in dimension is compact for easy storage. Chain Size: 31.5 inch * 5/16 inch..
- Steel Frame with Chain: Built by heavy-duty steel with a powder-coated finish, our snatch block pulley system has better immunity to corrosion and rust. Also, our high-strength G70 chain with grab hook won’t wear out from rust over time..
- 3-Inch Single Sheave: Smooth single sheave protects the rope from damaging and saves more effort. It is possible to remove one side by taking the pin off, slip in the winch cable, and change your pulling direction to pull a vehicle out of an awkward place..
- 360° Rotation: Adopt a one-piece casting process.
- the cable pulley block features the swivel shackle for great convenience and enhanced security. The built-in security device avoids accidental falling..
- Wide Application: Our snatch block pulley is widely used to do the lifting, towing, recovery, and rigging jobs outdoor and indoor, ideal for factories, warehouses, garages, shipbuilding, engineering machinery, etc..
Maasdam Rope Puller Kit- with 200' Rope, Spliced Hook and Loopie Sling
- Very high efficiency single pulley with one-way rotation and swivel.
- Designed to be used in conjunction with a descender for maximum simplicity when setting up a heavy load deviation or haul systems for work at height or rescue.
- Optimal hauling efficiency and lowering convenience: the faceted sheave only rotates in one direction, providing excellent efficiency when hauling and adding friction zones for the rope for additional braking when lowering heavy loads.
- Easy handling: swivel allows pulley to be oriented under load and accepts up to three carabiners and allows the use of ropes and slings to facilitate maneuvers..
- Sheave diameter: 40 mm maximum usage load: 3 x 2 = 6 kN.
GM CLIMBING 32kN UIAA Certified Large Rescue Pulley Single/Double Sheave with Swing Plate CE/UIAA (Black)
- Quality-manufactured pulley for mountain rescue, tower work, ski patrol or whatever requires block and tackle system..
- Sheave of 2.24 inches Dia, pulley with large sheave is much better and easier for hauling big load..
- Mounted with ball bearing for higher efficiency and smoothness! Swing side for easy and rapid rope installation and removal!.
- CE / UIAA Certification! Rating to 32kN / 7100lbs for high durability to satisfy all your requirements, like pulling a stranded boat, hauling some out of a crevasse, etc..
- Compatible with wide range of ropes, up to 16mm (5/8")! Multiple anchors for complex rescue / hauling system setup!.
scottchen PRO 3' Heavy Duty Garage Door Pulley Kits, 3/8' Arbor 200LB Load, 4 Sheave Pulleys, 2 Clevis Forks, 4 Bolts and Nuts Kit
- 【Function】This 3in garage door pulley kit designed to repair or replace damaged parts of your old, worn, noisy and jumping doors. Provide a quiet, smooth and pleasant door opening/closing..
- 【Compatible】The 3in sheave pulley is 3/8” bore and 3/8” cable groove, which adapt to most commonly garage doors and accept max 5/16” diameter pulling cable or straps..
- 【Valued Package】The package include 4 pulleys and 2 clevis forks, this can be used as 2 fixed pulleys plus 2 sliding clevis wheel pulleys, fulfill your various demand. Coming with 4 screws and nuts, saving your time to look for from drawer or corner..
- 【High Quality】The garage door pulley system is heavy duty, 200lb load rating for doors up to 400lb. Durable steel construction, center race with 9 ball bearings and pre-lubricated in factory for smooth sliding..
- 【Kindly Reminder】Professional installation is recommended. If DIY, please remember wearing safety guard always, using the proper tools and install properly..
Polaris Snowmobile Quick Drive Belt Kit, Part 2206046
- The ROP Shop replacement 103 HPQ Drive Clutch.
- Specs - Clutch Type: 103 HPQ (High Performance Quad). Refer to images 2 & 3 for more information.
- This 103 HPQ clutch allows for a quicker shift out and a greater top end speed. This clutch has a larger diameter pulley and greater sheave angles than OEM to provide more ratio and less wear on the drive belt and sheave faces. The increased angle of the sheaves means smoother up shift because the moveable face pushes (not pinches) the belt to the outer diameter of the clutch. Reported performance enhancements of 25% over the OEM clutch with performance kits is typical.
- This clutch does NOT have the EBS feature, but will fit models with EBS. Operator can use this clutch but will NOT have the EBS feature. When installing you will need to use an 18mm bolt with a 2.5 thread pitch in order to remove the clutch.
PETZL - ROLLCLIP A, Pulley-Carabiner, Triact-Lock
- Facilitates manipulations: - Keylock system prevents any accidental snagging of the carabiner when putting the pulley in place - gate opening on the pulley side facilitates installation of the rope when the pulley is fixed to the anchor - may be used with a CAPTIV positioning bar to favor loading of the carabiner along its major axis and to limit the risk of it flipping - sheave mounted on sealed ball bearings for excellent efficiency.
- With TRIACT-LOCK locking system: may be used to minimize friction on the work rope while keeping set-ups simple. May also be used to install redirects..
- H profile of carabiner: - ensures an improved strength-to-weight ratio - protects markings from abrasion.
- Specifications Material(s): aluminum Min. rope diameter: 7 mm Max. rope diameter: 13 mm Sheave diameter: 18 mm Maximum working load: 2 x 2 = 4 kN Efficiency: 85 % Major axis strength: 20 kN Minor axis strength: 8 kN Open gate strength: 7 kN.
- Warning: RollClip Triact- Lock can't be used with Ascender (doesn't fit through the holes).
SuperHandy Manual Chain Block Hoist Come Along 1 Ton 2200Lbs Capacity 10 Foot Lift 2 Heavy Duty Hooks Industrial Grade Steel Construction Building Garages Warehouse Automotive Machinery
- SPECS - This Hoist has an Aluminum Alloy Hand Wheel for lifting or dragging at a MAX Lift of 10 Feet, Head Room of 12" inch and Load Chain Diameter of 6mm at a MAX weight capacity of 1 TON 2200LBS (1000Kg) of working load capacity.
- RESILIENT - Heavy duty 20MN2 Alloy Steel Chain and milled steel gears are black oxide finished, heat-treated cold rolled forged.
- Precision machined load sheave chain pockets using Roller Bearings and Friction Discs for smooth operation and increased efficiency.
- QUALITY DESIGN - This Hoist is built to meet ASME Overhead Hoists (underhung) regulations under OSHA B30.16 and ASME HST-2 standards.
- Our compact design requires low headroom.
- Our hoists use load sharing gears, making heavy loads easy.
- SAFETY - SuperHandy Hoists are versatile but for the use that was intended and designed for.
- Do NOT use our hoists for non-recommended applications.
- The ergonomic rubber hand grip provides better comfort and security.
- BEST APPLICATION - Use for lifting/dragging at Construction Sites, Garages, Warehouses, Ship Building Wharves/Docks, Automotive Facilities, Workshops, Installation, Mines, Factories and Farms.
- Included is a handy storage bag and shoulder strap for easy carry.
SuperHandy Manual Chain Block Hoist Come Along 1/2 Ton 1100Lbs Capacity 10 Foot Lift 2 Heavy Duty Hooks Industrial Grade Steel Construction Building Garages Warehouse Automotive Machinery
- SPECS - This Hoist has an Aluminum Alloy Hand Wheel for lifting or dragging at a MAX Lift of 10 Feet, Head Room of 11" inch and Load Chain Diameter of 5mm at a MAX weight capacity of 1/2 TON 1100LBS (500Kg) of working load capacity.
- RESILIENT - Heavy duty 20MN2 Alloy Steel Chain and milled steel gears are black oxide finished, heat-treated cold rolled forged.
- Precision machined load sheave chain pockets using Roller Bearings and Friction Discs for smooth operation and increased efficiency.
- QUALITY DESIGN - This Hoist is built to meet ASME Overhead Hoists (underhung) regulations under OSHA B30.16 and ASME HST-2 standards.
- Our compact design requires low headroom.
- Our hoists use load sharing gears, making heavy loads easy.
- SAFETY - SuperHandy Hoists are versatile but for the use that was intended and designed for.
- Do NOT use our hoists for non-recommended applications.
- The ergonomic rubber hand grip provides better comfort and security.
- BEST APPLICATION - Use for lifting/dragging at Construction Sites, Garages, Warehouses, Ship Building Wharves/Docks, Automotive Facilities, Workshops, Installation, Mines, Factories and Farms.
- Included is a handy storage bag and shoulder strap for easy carry.