ReviewsSheet Metal Punch

Disc Cutter - Circle - 10 Punches - for Jewelry Making - SFC Tools - 28-589

  • Round Plate Disc Cutter cuts circles out of sheet metal..
  • Spring Loaded Die Plates: 4-1/4" x 3/4" *2 plates combine*.
  • Punch sizes (mm): 3.2, 6.4, 9.5, 12.7, 15.9, 19, 22.2, 25.4, 28.6, 31.8.
  • Punch sizes (inches): 0.13, 0.25, 0.38, 0.5, 0.63, 0.75, 0.88, 1, 1.13, 1.25.
Check Stock

Swingline Desktop Hole Punch, Hole Puncher, Precision Pro, Adjustable, 2-3 Holes, 10 Sheet Punch Capacity, Black/Gold (74086)

  • PRECISION PUNCHING: Professional grade, 2 3 hole metal punch is specially designed for accurate, manual hole punching. Trust this punch for perfectly professional precision.
  • PATENTED PINS: Professional punch uses precise, patented pin technology for consistently accurate performance.
  • 10 SHEET CAPACITY: Punch creates clean and precise, 9/32 inches holes, piercing through up to 10 sheets of paper.
  • LESS MESS: Easy glide chip tray makes cleanup of punched holes fast and simple. Removable tray built into the base of the punch.
Check Stock

Eurotool EuroPunch 1.25mm Round Hole Punch Pliers for Sheet Metal

  • These hole punch pliers will punch copper or silver as thick as 18 gauge..
  • Will create a clean 1.25mm hole without rough edges or burs in sheet metal stock..
  • Measurements: Pliers are 5 1/4" Long. Punch pin is 1.25mm in diameter and will create 1.25mm round holes..
Check Stock

Chiloskit 28 pc 3/32\ - 1/2\ Transfer Punch Set Machinist Tools Punches Machinist Thread Kit

  • 28-pc. CENTER PUNCH Set Steel Transfer Punch Machinist Thread Tool Kit Set.Heat treated, carbon steel construction.Black oxide finished for durability..
  • EASY TO USE: Select one of the punches, hold punch shaft with one hand while gently tapping a hammer (not included) on the flat top of the punch to make a mark on your selected material that is visible for your center punch, then use your existing center punch (not included) to make a dimple.
  • Eliminates guesswork when transfering threaded, drilled or reamed holes in sheet metal..
  • Eliminates the guesswork when transferring punches through holes.A transfer punch set is a punch set in an index with a specific outer diameter that is non-tapered and extends the entire length of the punch, except for the tip. It is used to tightly fit the tolerances of an existing hole and when struck precisely transfers the center of that hole to another surface..
  • 4-7/8" long: 3/32" to 1/2" by 1/64" increments, handy 17/32"punch.
Check Stock

General Tools S1270 Gasket Punch Set, Set of 10 Punches

  • This convenient gasket punch set offers everything you ll need to make effortless punch holes in gasket material, soft sheet metal and leather.
  • An assortment of 10 punches, each of which fits snugly onto the solid steel driving mandrel.
  • The set includes gasket punch sizes 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8, and 1 inch.
  • Includes a molded plastic storage case for easy storage.
Check Stock

1 Ton Aviation Power Punch Kit Sheet Metal Hole Punching 7 Sizes Die DIY Repair

  • Durable power punch tool for punching accurate round holes through all types of materials.
  • From thin brass metal to plastic sheet through 16 gauge mild steel..
  • Package comes with seven quick-change, durable heat treated punch-and-die sets..
  • Sizes from 3/32, 1/8, 5/32, 3/16, 7/32, 1/4 and 9/32". Punch opens up to 1/4".
  • Set completes with a durable plastic storage case.
Check Stock

Astro 605ST ONYX Straight Type Punch/Flange Tool

  • Features a rotating head for convenient use.
  • Every pull of the lever delivers a single punch or a single flange crimp with precision control..
  • Forms an offset crimped edge on sheet metals for no-bump lay welds.
Check Stock

Astro 608PT ONYX Pistol Grip Punch/Flange Tool

  • Features a rotating head for convenient use.
  • Every pull of the lever delivers a single punch or a single flange crimp with precision control..
  • Forms an offset crimped edge on sheet metals for no-bump lay welds.
Check Stock

Swingline 2 Hole Punch, Comfort Handle Two Hole Puncher, 28 Sheet Punch Capacity, 50% Reduced Effort, Includes Alignment Guide, Black (74050)

  • EASY PUNCHING – Metal construction ensures durability and strength. This sturdy 2-hole punch is built to provide long-lasting use..
  • COMFORT HANDLE – Wide, padded handle adds comfort and makes it easier to punch. It conveniently locks in closed position for easy storage..
  • 28-SHEET CAPACITY – Powerful punch cuts through as many as 28 sheets of paper, creating a precise ¼” hole..
  • REDUCED EFFORT – Specially engineered to require 50% less manual force than traditional hole punches. Cuts cleanly through paper with reduced effort on the part of the user..
  • LESS MESS – Removable non-skid tray on the base ensures that the punch stays right where you want it and assists with cleanup. Built-in adjustable paper guide ensures punch accuracy..
Check Stock

Swingline Desktop Hole Punch, Light Touch Metal Hole Puncher with Adjustable System for 2-7 Holes, Low Effort Paper Punch, Home School & Home Office Supplies, 20 Sheet Capacity, Black/Silver (74030)

  • LEVER HANDLE – Durable metal punch is designed with a wide, comfortable lever handle that simplifies the punching process. A light touch is all it takes to reliably punch clean, precise holes..
  • ADJUSTABLE PUNCHING SYSTEM – Patented punch head system comes with 3 punch heads, but can accommodate between 2 and 7. Additional punch heads (A7074865E) are sold separately..
  • 20-SHEET CAPACITY – Punch neatly pierces as many as 20 sheets of paper, creating precise 9/32” holes..
  • REDUCED EFFORT – Soft-touch lever requires 50% less manual force than traditional desktop punches..
  • LESS MESS – Cleanup of punched holes is simple and easy. A removable tray in the base catches punched paper scraps. Simply empty it into a waste basket and you're good to go..
  • Note: This product has the option to be a minimum of 2 hole punch, and a maximum of 7 hole punch. However, the product itself comes with 3 hole punch heads. The rest REPLACEMENT HEADS – Additional punch heads (A7074865E) are sold separately.
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock