ReviewsShift Ring Adapter

White Round Ball Gear Shift Knobs, Universal Automatic Manual Weighted Shifter Knob + Aluminum Adapter, Stick Shift Knob Head Cover Handle Ball with Adapter 12x1.25mm Fit Most Vehicles (White)

☆ SIZE: Outer thread pitch M12x1.25, Fit almost shift knob with 12x1.25 thread pitch,especially suitable for most of shift knob. Round shift knobs diameter 54mm, upgrades your driving comfort and offer a better control.
☆ FITMENT: Universal fits most non threaded shifters manual and transmission, such as BMW,VW,Jeep,Saturn,Fiat and so on. Please check non threaded shifter diameter before placing order. It will improve driving feel and shifting due to low weight and sturdy.Enhance shifting more smoothly and quickly.
☆ SPECIAL MATERIAL: Made of Acrylic Plastic and Copper, durable and do not fade, feel comfortable in hand like Marble when shifting, avoid getting too hot in the summer and too cold in the winter.
☆ EASY TO INSTALL: Easy installation, direct replace existing shift knob by adapter, the round shift knobs install on the adapter. Tighten screw the adapter on shift handle, screw the ball knobs on the adapter, easy and quick to install by all drivers even the beginners.
☆ PACKAGE INCLUDE: 1 x Shift Knob + 1 x Adapters (M12*1.25) + 6 x Adapters Accessories + 1 x install tool.
Come with substantive adapters to fit for non threaded knobs, also fit for threaded knobs the same time.

Check Stock

Ball Shift Knobs with Adapter Round Manual Gear Shifter Knobs, Universal Shift Knob Shifter Adapter for Non Threaded Shift Knob, Weighted Ball Shifter Shift Knob with Aluminum Adapter 12x1.25mm (Gray)

☆ SIZE: Outer thread pitch M12x1.25, Fit almost shift knob with 12x1.25 thread pitch,especially suitable for most of shift knob. Round shift knobs diameter 54mm, upgrades your driving comfort and offer a better control.
☆ FITMENT: Universal fits most non threaded shifters manual and transmission, such as BMW,VW,Jeep,Saturn,Fiat and so on. Please check non threaded shifter diameter before placing order. It will improve driving feel and shifting due to low weight and sturdy.Enhance shifting more smoothly and quickly.
☆ SPECIAL MATERIAL: Made of Acrylic Plastic and Copper, durable and do not fade, feel comfortable in hand like Marble when shifting, avoid getting too hot in the summer and too cold in the winter.
☆ EASY TO INSTALL: Easy installation, direct replace existing shift knob by adapter, the round shift knobs install on the adapter. Tighten screw the adapter on shift handle, screw the ball knobs on the adapter, easy and quick to install by all drivers even the beginners.
☆ PACKAGE INCLUDE: 1 x Shift Knob + 1 x Adapters (M12*1.25) + 6 x Adapters Accessories + 1 x install tool.
Come with substantive adapters to fit for non threaded knobs, also fit for threaded knobs the same time.

Check Stock

K&F Concept Lens Mount Adapter EOS EF/EFS Lens to Fuji FX Mount X-Pro1 X Camera X-Series Mirrorless Cameras

With this lens mount adapter, you can use EOS EF / EFS Lens on a Fuji FX Mount Camera body, such as X-Pro1 X-E1 X-E2 X-A1 X-M1 X-T1..
There are no electrical contacts in the adapter ring, exposure and focus has to be adjusted manually..
Made of brass and aluminum (not plastic).Diaphragm control of the lens is set manually..
Compatible with Fuji FX Mount Camera X-Pro1 X-E1 X-E2 X-A1 X-M1 X-T1..
Please note: Infinity focus position：the position of the infinity mark 【∞】of the telephoto lens or super telephoto lens is shifted slightly to the positive side to enable focus adjustment even when focus shift is caused due to temperature changes.The shift range is denoted by an L-shaped line, Be sure to check the focus through the viewfinder even when you shoot at infinity..

Check Stock

YASUOA Black 8 Ball Billiard Round Shift Knob Acrylic Manual Gear Shift Knob Shifter with 3 Adapters Universal Fit for Manual Car Black

【What You Will Get】1*shift knob (M 12*1.25), 3 shift knob adapters (M 8*1.25, M 10*1.25, M 10*1.5)..
【Gear Shifter Knobs Material】Shift knob cover is a round ball, black 8 ball, easy to hold the shift. Shift knobs made with acrylic and adapters....
【Installation Method】Remove original gear shifter knobs, choose a suitable adapter to fit the shifter and knob, you can choose it if your shift....
【Universal Fitment】Gear shift knob fits for most manual cars' shifter or automatic transmission 4 5 6 Speed shifter knob, such as for Nissan, for....
【Service Guarantee】 If you have any dissatisfaction with the gear shifter knobs or the size of the shift knob adapter thread, we can offer you 180....

Check Stock

Gear Shift Knob Adapter, Universal Car Shift Knob Adapter for Non Threaded Shifters 12x1.25 (Black)

【Suitable Models】Shift knob adapter especially design for 12x1.25 thread pitch. Making your car fit more other non threaded shifters..
【Aluminum Car Shift Knob Adapter】Manufactured with aluminum material, good corrosion resistance, wear-resistance, fast heat dissipation,professional manufacturing, trustworthy..
【Comfortable Driving Environment】This shift boot adapter can help you operate the shift well, which will control the speed of your car efficiently..
【Install Quickly】Come with 1 pc wrench, installation can be completed in a short time, Perfect for replacing the old or broken one, we suggest professional installation..
【Exquisite Workmanship】Performed many performance tests before leaving the factory, you can use it with peace of mind..

Check Stock

Dewhel Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 12X1.25 (Black)

Fit for most Manual Subaru Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.
Made from aircraft grade billet aluminum.
Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..

Check Stock

3 Inch Black Aluminum Shift Knob Extender Extension + Adapter for 5 6 Speed Manual Gear Shifter Lever 12X1.25

Used to raise the gear shift knob to provide a better arm angle for more precise and comfortable shifting. Longer shift levers are commonly used in race applications where every shift matters. And the adapter is to take up the space between the bottom of any aftermarket shift knob and your OEM shift boot making your cockpit look clean and complete again..
This Shift Knob Extension and Adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob..
Easy to install, can be installed quickly, no modification required..
Fit for most Manual Vehicles with M12*1.25 Thread, for Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual), Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.

Check Stock

Mishimoto MMSK-CF Carbon Fiber Shift Knob , Black

Design: Carbon fiber Shift Knob has an elegant slender body. The long pole ergonomic designed will make you feel very satisfied during use. No logo, personalized, cool and fashion with long weighted style, enhance your vehicle interior..
Material: The shifter knob is made of high quality of carbon fiber、acrylic and aluminum alloy. As the Angle of light changes, you can appreciate the subtly woven carbon fiber inside. You'll need it to decorate your driver's seat..
Size: The carbon fiber shift knob diameter：33 mm/1.29 inches, length: 130 mm, mounting hole: M 18*1.5.
Size of adapter: 8 MM、10 MM、12 MM. Please check the adapter size before placing an order..
Suitability: We come with 3 different kinds of Adapter, so that the shift knob Fits for most cars equipped with manual transmission or automatic transmission..
Package: 1 x Carbon Fiber Shift Knob, 3 x Adapters ( 8 MM、10 MM、12 MM ).

Check Stock

Dewhel Shift KNOB Boot Retainer/Adapter for Manual Gear Shifter Lever 12X1.25 (Neo Chrome)

Fit for most Manual Subaru Impreza , Susuki Samurai ,Toyota Supra 1993 -98 (JZ) ,Toyota MR2 1991-95 (SW20),Toyota Corrola,Toyota Celica-Tercel,Toyota Camry,Toyota Trucks,Geo tracker,Ford Mustang (Newer manual),Skyline (R34),Scion xA xB and tC(excluding Scion tC and xB 2008) etc.
Made from aircraft grade billet aluminum.
Takes up the space between the bottom of your shift knob and the top of your shift boot for a nice aesthetically pleasing affect. This shift boot retainer adapter will allow you to buy any aftermarket shift knob of your choice and say goodbye to your ugly OEM shift knob. The shift boot adapter is meant to be used on MANUAL Gear Shifter Lever TRANSMISSIONS (ONLY)..

Check Stock

TOMALL 5.1'' Car Gear Stick Shifter Knobs Lengthened Weighted Aluminum Alloy Car Shift Head Knob M8 M10 M12 Screw Car Universal Manual Transmission (Black)

✔Fashion Upgrade - The gear shift knob is made of high-quality aluminum alloy material, will not fade and not slip when used, weighs 240g, the modified gear shift head makes your car a stylish upgrade..
✔Modified Extended - The length of this gear shift is 13cm. The extended shift head allows you to drive more comfortably, with better grip, and the dent design on it prevents you from slipping when using it..
✔Manual Universal - The gear shift is suitable for most manual gear cars. You can also measure the size of the original gear shift before buying. (Note: It cannot be used for models that need to be lifted when the car is in reverse gear).
✔Easy to Install - It only takes a few minutes to install. Choose a suitable adapter to install on the shifting stick (including 8mm, 10mm, 12mm), and then install the shift knob on the adapter. Be careful not to apply too much force during installation to avoid damage to the adapter..
✔Come and Buy - The package contains 1 car gear stick shifter knob and 3 adapters, which can meet your needs for car modification. If you have any questions about the product, you can contact us by email, and we will do our best to solve the problem for you..

Check Stock

NEEWER 67mm 4-in-1 Magnetic Lens Filter Kit, Includes Neutral Density ND1000+MCUV+CPL+Adapter Ring with 42-Layer Coating/Ultra Slim/Waterproof/Scratch Resistant HD Optical Glass&Water-Resistant Pouch

【Complete Camera Lens Filter Kit】 The 4-in-i magnetic camera lens filter kit includes a Neutral Density ND 1000 filter, a ultraviolet MCUV filter, a circular polarizing (CPL) filter, a Magnetic Adapter Ring, a water-resistant Filter Pouch to withstand drizzling rain or snow, and a handy Cleaning Cloth to remove dirt or grease on the filter surface. You can use the magnetic adapter ring with any filter, or just leave the adapter ring on the lens for use with the lens cap.
【Quick Magnetic Attachment】 Unlike traditional thread filters, the NEEWER Magnetic Lens Filter Kit allows you to change or install filters in less than a second, and even achieve easy stacking of filters for use. Suitable for outdoor travel photography, and capturing beautiful moments.
【42-layer Nano Coating & HD optical glass】Adopt imported AGC HD optical glass, 42-layer double-sided coating, no chromatic aberration (color shift), hydrophobicity, scratch resistance, and oil resistance. All-round protection of your lens from accidental damage.
【Ultra Slim Design】Aviation-grade aluminum alloy is precision CNC machined, making the filter durable and easy to install and remove from a 67mm lens. The 1.9mm-3.5mm ultra-thin frame ensures that the 16mm wide-angle focal len....

Check Stock