ReviewsShocks For Tacoma 2wd

Readylift 66-5002 ReadyLift 2.0 Tall Rear Kit Silver

  • FITMENT: Lift kit for 2005 - 2019 Toyota Tacoma (2WD & 4WD). Does NOT fit 5-Lug or TRD Off-Road models. Simple installation in 2 to 4 hours for....
  • TACOMA SUSPENSION LIFT: This leveling kit will sustain your original ride quality with minimal effect on your truck’s center of gravity to maintain....
  • INCREASE GROUND CLEARANCE: Raise your Tacoma 3" in the front and 2" in the rear. Improve the look of your truck and increase ground clearance,....
  • ALL HARDWARE INCLUDED: Comes with 2 x 3" aircraft billet front strut spacers, 2 x 2" aircraft billet rear lift blocks, 4 extended zinc-plated U-bolts.....
  • TECHNICAL NOTES: Please note: Lift spacer thickness and lift is not a 1 to 1 ratio due to the suspension geometry. Wheel alignment is recommended....
Check Stock

FriHobby RC Shocks Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 2WD/4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 (Gray)

  • Compatible with:1/10 Traxxas Slash 2WD&4x4, Stampede 2WD&4x4, Rustler 2WD&4x4 VXL, Hoss 4X4 VXL, Ford F-150, Bandit RC Trucks..
  • The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

BIG BORE Shocks Upgrades Part for Stampede 2WD 4x4,Slash 2WD 4x4,Hoss 2WD 4x4,Rustler 2WD 4x4,ARRCat 1/10 Scale Front Rear Aluminum Metal Shock,4PCS RC Shocks Absorber,Silver,Replace #5862

  • 【Fits for Traxxas RC Car】 The big bore upgrades parts suitable for 1/10 Scale Slash 4x4 2WD, 1/10 Scale Stampede VXL 4x4 2WD, 1/10 Scale Hoss VXL 4x4 2WD , Bandit, Ford F-150 ,1/10 Scale Rustler VXL 4x4 2WD rc car..
  • 【Upgrade to Great Bumping】The rc shocks upgrades to provide big jumps,the big bore function provide optimal bump and jump control for your Traxxas model.The rc upgrades part contains a small amount of lubricating oil, which can be used directly without adding oil..
  • 【Long-lasting Performance】 The big bore shock offer incredible durability and near frictionless operation for ultra-smooth damping and long-lasting performance..
  • ✅ 【Heavy Duty Material】 Heavy duty rc shocks,made of Quality Materials and CNC machined for precision, Heavy duty good for big jumps,ensure high reliability and good compatibility, high protection and long durability..
  • 【What You Get】If you are not 100% completely satisfied with our products, please do not hesitate to contact us to request a refund or exchange! Your Satisfaction is Our Main Priority..
Check Stock

FriHobby RC Shocks Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 2WD/4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 (Navy Blue)

  • Compatible with:1/10 Traxxas Slash 2WD&4x4, Stampede 2WD&4x4, Rustler 2WD&4x4 VXL, Hoss 4X4 VXL, Ford F-150, Bandit RC Trucks..
  • The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

OGRC 4PCS Aluminum Front & Rear RC Shocks Absorber Assembled Full Metal Big Bore Shocks Upgrades Parts for 1/10 Traxxas Slash 4x4 Shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 RC Car Replace 5862 (Red)

  • 【Compatible】The RC Shocks is perfect compatible with:1/10 Traxxas Slash 4x4 / Stampede VXL 4x4 / Rustler 4X4 VXL / Hoss 4X4 VXL Trucks etc. Replacement of Stock Model Part# 5862 (Notice: Not compatible with Slash 2WD, Stampede VXL 2WD, Rustler VXL 2WD, Ford F-150 Raptor, Bandit)..
  • 【Sturdy Material】The slash shocks is made of lightweight All aluminum alloy material, which is durable and corrosion resistance, improves the performance of the rc trucks..
  • 【4 RC Shocks Absorber Set】2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm), with screws..
  • 【Provide Nice Damping Effect】For the ultimate in bump and jump control. metal shock bores, and metal shafts offer incredible durability and near frictionless operation for ultra smooth damping and long-lasting performance..
  • 【Thoughtful and Practical】The main body part adopts the threaded design, which allows an easier and quicker installation, also will help to quick ride height adjustments and pre-load tuning ability, and improve the stability when the RC car run on the road..
Check Stock

FriHobby RC Shocks All Metal Aluminum Threaded Absorber Damper Upgrades Parts for Traxxas Slash 4x4 Rustler 4X4 Stampede 4X4 Hoss 4X4 Replace 5862 Big Bore Shock Set (Navy Blue)

  • Compatible with:1/10 Traxxas Slash 4x4, Stampede 4x4 VXL, Rustle 4x4 VXL, Hoss 4X4 VXL, Bandit RC Trucks.(Notice: Not compatible with Slash 2WD, Stampede VXL 2WD, Rustler VXL 2WD, Ford F-150 Raptor).
  • The slash shocks is made of Aluminum Alloy material,high protection and long durability, improves the performance of the rc trucks. Ideal replacement of 5862 Big Bore Shock Set, with springs (come without pre oiled, so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Quality Guarantee, FriHobby 100% Customer satisfaction is our priority, if you have any issue about this items, please feel free to contact us..
Check Stock

HobbyPark Aluminum Front & Rear Shock Absorber Assembled Full Metal for RC 1/10 Traxxas Slash, Stampede, Rustler, Nitro Slash, Replacement of Parts 5862 3760 3762 (Red)

  • ✔Compatible with:1/10 Scale Traxxas Slash 4×4, Slash 2WD, Stampede 4×4, Stampede 2WD, Rustler 4X4 VXL, Rustler 2WD, Ford F-150 Raptor, Nitro Slash, Nitro Rustler, etc.
  • ✔2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),w/Screws.
  • ✔Replacement of Stock Model Part# 5862 3760 3762.
  • ✔Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing).
Check Stock

HobbyPark Aluminum Front & Rear Shock Absorber Assembled Full Metal for RC 1/10 Traxxas Slash, Stampede, Rustler, Nitro Slash, Replacement of Parts 5862 3760 3762 (Navy Blue)

  • ✔Compatible with:1/10 Scale Traxxas Slash 4x4, Slash 2WD, Stampede 4x4, Stampede 2WD, Rustler 4X4 VXL, Rustler 2WD, Ford F-150 Raptor, Nitro Slash, Nitro Rustler, etc.
  • ✔2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),w/Screws.
  • ✔Replacement of Stock Model Part# 5862 3760 3762.
  • ✔Pack of 4 (These Shocks come without pre oiled so make sure you get some before installing).
Check Stock

Supreme Suspensions - Front Delrin Shock Extenders for 2' Lifted 1995-2003 Ford Explorer [ 2WD ]

  • COMPATIBLE WITH 1995 - 2003 Ford Explorer (2WD Only). Fits Front Stock Shocks Only..
  • CONTENTS: 2x High-Density Delrin Shock Extenders, Installation Hardware, Installation Instructions, and Supreme Suspensions Pro Pack.
  • TECHNICAL NOTES: Accomodates 2" Lift Kits. *For shocks that use a 2.75" wide mount ONLY..
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. NO cutting, grinding or welding required..
  • BENEFITS: Does NOT compromise factory ride quality, reduces over-extension of stock shock pistons and eliminates the need of replacing stock shocks..
Check Stock

Supreme Suspensions - Front Leveling Kit for 2005-2022 Tacoma 2 Front Lift Aircraft Billet Aluminum Strut Spacers 2WD 4WD Black

  • COMPATIBLE WITH 2005 - 2022 Tacoma, 2003 - 2022 4Runner and 2007 - 2015 FJ Cruiser (2WD 4WD). Does NOT Fit Tacoma 5-Lug Models. Does NOT Fit 4Runner....
  • CONTENTS: (2x) Aircraft Billet Aluminum Front Strut Spacers, Installation Hardware, Installation Instructions and Supreme Suspensions Pro Pack..
  • TECHNICAL NOTES: 2 inch front suspension leveling lift. Please note that spacer thickness to lift height is NOT a 1:1 ratio. It is recommended that....
  • INSTALLATION: Easy bolt-on installation takes 1 to 2 hours without the need for special tools. An alignment is recommended after install..
  • BENEFITS: Improves the look of your vehicle and increases ground clearance, allowing you to fit larger custom rims and tires. Improves axle alignment....
Check Stock

Bilstein 4600 Monotube Gas Shock Set compatible with 2009-2013 Dodge Ram 1500 2WD

  • Set of 4 Shocks - compatible with 2WD Vehicles.
  • Shock boots included with all shocks except in cases of special fitment..
  • Monotube gas charged for longevity, durability, and performance..
  • All necessary washers, bushings, and nuts included. Factory shock mounting bolts are reused for installation..
  • Bilstein's Limited Lifetime manufacturer's Warranty protects against defects and premature failure..
Check Stock