ReviewsShore C Tester

Epoxy Adhesive Optically Clear High Impact,Two Part Low Viscosity AA-Bond F113 5gm Pouch

  • Spec. Gravity 1.23 g/cc Mixed Viscosity 175 cP At 25°C, Thixotropic Index 1.0.
  • Mechanical Properties Hardness, Shore D 86, Pot Life 1.5 hours, Refractive Index 1.51.
  • Glass Transition Temp (Tg), ultimate 102°C.
  • cure time 24 hrs At 25°C, 1-2 hrs At 65°C.
Check Stock

Electrically Conductive Adhesive, Silver Filled Epoxy, Long Pot Life AA-Duct 902LP, 5gm kit

  • Spec. Gravity 2.79 g/cc Mixed Viscosity Paste At 25°C Reactive solids contents, % 100,Pot Life 3 hrs.
  • Volume Resistivity 003e 0.0001,Shrinkage linear in/in 0.003 Lap shear strength, psi 9600.
  • Operating Temperature --50 to +170 °C,Appearance Silver.
  • Cure Time 2 minutes At 120°C,5 minutes At 100°C,12 hours At 25°C.
Check Stock

Digital PH Tester for Water- PH Meter High Accuracy Water Quality Tester with ATC, 0.01pH Resolution 3 in 1 PH TDS Temp for Household Drinking Water, Hydroponics, Lab, Aquarium by ORAPXI

  • ✅High Accuracy&One-Button Lock Reading Function - With high sensitive glass probe, you can get a full measurement range of 0-14pH, 0.01 pH resolution. High-accuracy algorithm chip and electrode of our digital water ph tester ensure accurate and fast response.One-button lock reading function helps lock reading even if the tester is taken out of the sample!.
  • ✅Automatic Calibration - The digital ph meter for water uses a 3-point AUTOMATIC calibration method, calibrating the electrode to solutions of pH 4.00, pH 6.86, and pH 9.18 to ensure the accuracy of your measurements..
  • ✅Automatic Temperature Compensation - No longer need to pay attention to the temperature of testing liquid, Allprettyall ph tester digital can accurately determine the pH value of the sample in the temperature range of 0 °C-60 °C (32 °F-140 °F), so as to solve the inaccurate problem caused by changing the liquid temperature..
  • ✅Wide Application-Allprettyall water quality tester designed in pH and temperature can be measured simultaneously with high precision. Omni-directional measurement of water quality to ensure the health of water quality! The ph meter digital water tester is ideal for drinking water,daily household,hydroponics,sewage, lab teaching and ANY water sample..
Check Stock

Electrically Conductive Epoxy, Carbon Filled Adhesive, Room Temperature Cure, AA-CARB 61, 10gm kit

  • Spec. Gravity 1.35 g/cc Compressive Strength, psi 13,000 Pot Life 30 minutes Appearance Black.
  • Mechanical Properties Hardness, Shore D 85.
  • Vol Resistivity ohm. cm 003c 40 Operating Temp -50 to 145 °C Mix Ratio/weight 100:10 / Resin:Hardener.
  • Cure Time 24hrs At 25°C, 1 hr At 60°C , 15 minutes At 100°C.
Check Stock

Testeronics PH Meter and TDS Meter Kit for Practical Water Testing | PH Tester Digital Accuracy 0.01 Accuracy Lab PH Meter Pen Type | ±2% Readout Accuracy 3-in-1 TDS Temperature & Conductivity Meter

  • [EASY READING BIG BACKLIT LCD DISPLAY] PH and TDS meters with double color Bigger Backlit LCD which allows wider angles of data reading and night reading..
  • [PH Meter] The pocket size digital PH pen is equipped with (ATC) auto temperature compensation function. No more need to worry about the temperature of to-be tested liquid. It can accurately determine pH value of the sample at any temperature in a range of 32°F - 140°F (0°C - 60°C). The tester can be calibrated with using Buffer Powder..
  • [TDS Meter] 3 in-1 TDS Meter Digital Water Tester, Accurate&Quick check heavy metal content, soluble salt content and temperature in the water which will be displayed on the screen in ppm (parts per million)..
  • [Accurate & Reliable] The PH tester can test quickly and accurately within ±0.01 PH. TDS meter Equipped with premium quality titanium alloy probe, Its measuring range of TDS is 0-9999 ppm with accuracy: ± 2%. It only takes a few seconds to show accurate and stable reading for the result to appear on screen..
  • [Widely Application] The tester kit is designed small and convenient. PH meter and TD&EC meter can test pH balance, ideal for testing drinking water, swimming pools, aquarium, spas, hydroponics, food, wine and beer making and more..
Check Stock

USB C Tester,KJ-KayJI 2 in 1 Tester Color Screen IPS Digital Multimeter(2022),Voltage,Cur,Pwr,Resistance,Elec,Temp,Capacity,Tme,Fast Charging,with USB Clip Cable Support PD2.0/PD3.0,QC2.0/QC3.0,BC1.2

  • ... cables. It can be also used to find the highest current of the Wireless Charger, and test capacity and electric energy of power bank..
  • PROFESSIONAL SAFETY GUARD: Featured with over-voltage protection, over-current protection, under-voltage protection, low energy protection and alarm system. This upgraded USB Type C tester can detect safety and maximally protect the appliances from damaging. It will cut off output automatically and alarm by sound, while it will save data when power off suddenly..
  • MULTIPLE COLOR SCREEN DISPLAY MODES: New upgraded version offers 8 LCD main color screen display interfaces, allowing switching the display interface by pressing the key. With the new interface settings, this instrument can monitor voltage, current, capacity, electric quantity, power, load impedance, D+/D- voltage and other data of USB..
  • WIDE RANGE OF APPLICATION: Thanks to the PD protocol quick charging mode measurement technology, this new multimeter supports the updated iPhone X mobile phone. (Support iphone 8 / 8P / iPhone Xs quick charging, 29W power, 5V3A / 9V3A / 12V2.5A / 15V2A). It also can be applied to test other type C devices, Compatible With Galaxy S10/S9/Note 10 +, ChromeBookPixel, OnePlus and More..
  • EVERSAME PROMISE: We have always believed that ....
Check Stock

Silver Epoxy, Electrically Conductive Adhesive, Highly Flexible Non-Bleeding AA-Duct 2919, 2.5gm kit

  • Spec. Gravity 2.32 g/cc Mixed Viscosity 995000 cP at temp 25.0 °C.
  • Mechanical Properties Hardness, Shore D 80 Adhesive Bond Strength 90 psi Lap shear 2 hrs At 65°C.
  • Electrical Properties Volume Resistivity 0.00011 ohm-cm,Dielectric Constant 4.8 At Frequency 1000 Hz.
  • Cure time 4 hrs At 65°C, 24.0 hour At 25°C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 50gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Nickel Epoxy, Electrically Conductive Adhesive, Room Temp Cure, Air Dry, AA-DUCT 903, 2.5gm kit

  • Spec. Gravity 2.79 g/cc Cured Viscosity Paste, Solids contents % 100 Pot Life 30 minutes.
  • Mechanical Properties Hardness, Shore D 83, Shrinkage linear in/in 0.003.
  • Lap shear strength, psi 9400, Volume Resistivity ohm cm less than 0.038.
  • cure time 15 minutes At 100°C, 45 minutes At 50°C, 24 hours At 25°C.
  • Mix Ratio, parts by weight 100/5 Resin/Hardener, Operating Temperature -60 to 150 °C.
Check Stock

Low Cost, 1 Part Heat Dry Electrically Conductive, Silver Epoxy Adhesive AA-DUCT AD1, 2.5gm Syringe

  • Mixed Viscosity 6800 cP, Density gm/cc 2.35, Silver percentage 65-75.
  • Mechanical Properties Hardness, Shore D 83, Pot Life 6 months At 25 °C 9 months refrigerated.
  • Sheet Resistivity 10-12 m?/sq, Lap shear strength 2000 Lb/in2.
  • Cure Time 0.7 hours At 200 °C, 1.5 hours At 180 °C, 2.5 hours At 160 °C.
Check Stock

allsun Christmas Light String Tester Non Contact Voltage Finder Meter Light Bulb&Fuse Checker Gun 12-600 V AC Mini Light Repairing Tool Light Keeper Fixer Pro, Blue

  • Christmas Light Fuse Tester has audible and visual indication and has a built in bulb remover to remove bulbs from the light set easily. Take note that bulb has to be removed and installed in device, so if you are looking for something to simply run down the line and find a bad bulb without removal this is not your tool..
  • Mini Christmas Light Tester is non-contact AC voltage detection, used as a 12V to 600V AC power tester, allows you to easily find any burned out bulbs on your Christmas lights. If you have any issues, check the batteries..
  • Light Keeper Fixer Pro has adjustable detection sensitivity, With a push of a button you can locate your Christmas light string problem, operating environment is: 0°C to 40°C.
  • indoor use. It's a great tool to use around the house especially for DYI works..
  • Light Repairing Tool can test bulbs, fuses, and the light strand, saves you money by letting you quickly fix your existing lights. Parcel includes 2 pcs batteries, you can install well according to the negative and positive poles, when the sensitivity knob is set to the lowest, the instrument can also be used to distinguish between zero and live lines at 220V..
  • Non Contact Christmas Light Tester can test wires, fuses and bulbs. Easy to trace ....
Check Stock