ReviewsShore Hardness Meter
Mold Star 20T - 1A:1B Mix By Volume Translucent Platinum Silicone Rubber - Pint Unit
- Packaging may vary* Pourable translucent platinum-cure silicone rubber with Shore 20A Hardness.
Sterling Seal ORBN011x1000 Number-011 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 5/16\ ID, 7/16\ OD (Pack of 1000)
- [Size] - 40mm Outside Diameter, 32mm Inner Diameter, 4mm Cross-Section Diameter.
- [Hardness] - 70A Durometer (Shore Hardness) for resistance to penetration.
- [Nitrile Rubber] - Standard Nitrile Butadiene Rubber with a wide temperature range from -4℉ (-20°C) to 212℉ (100°C).
- [Application] - Widely used for pressure washer, filter, pump, water hose, plumbing pipe, maintenance and much more.
- [NOTE] - Please confirm the required size and material before purchase, and put it in the right place.
Ecoflex 00-30 Super Soft Platinum Silicone - Trial Unit
- Pot Life: 45 minutes – Cure Time: 4 hours.
- Please know that ‘Liquid Rubber’ is the same as ‘Pourable Silicon Rubber’.
- Cured rubber is very soft, very strong and very “stretchy”, stretching many times its original size without tearing and will rebound to its original form without distortion..
BONDiT B-45TH Adhesive 3 Qt.
- Makes strong mechanical bonds to a wide variety of materials, including: UHMW, Delrin, etched Teflon, metals, and most polymers..
- Self-leveling , ~9000cps @ ambient, thixitropic (will not run on vertical surface) easy to dispense and apply..
- Flexible two-part epoxy (75-80 Shore A hardness), 2:1 ratio, 130% elasticity..
- Thermal stability of -50°F to +300°F. Offers good corrosion/chemical resistance. 100% waterproof..
- NSN (National Stock Number) 8040-01-582-8097, and Cage Code 3DG02..
Medical Platinum Silicone Tubing (1/4' ID x 3/8' OD, 10 Feet)
- Platinum cured medical grade pure silicone.
- Maximum transparency, maximum tear resistance and yield strength..
- Remains pliable under extreme cold and usable under extreme heat conditions..
- Fluid transfer, oxygen lines, lab work use. Not intended for peristaltic pump applications..
BONDiT B-45TH Adhesive 1.5 Gallon
- Makes strong mechanical bonds to a wide variety of materials, including: UHMW, Delrin, etched Teflon, metals, and most polymers..
- Self-leveling , ~9000cps @ ambient, thixitropic (will not run on vertical surface) easy to dispense and apply..
- Flexible two-part epoxy (75-80 Shore A hardness), 2:1 ratio, 130% elasticity..
- Thermal stability of -50°F to +300°F. Offers good corrosion/chemical resistance. 100% waterproof..
- NSN (National Stock Number) 8040-01-582-8097, and Cage Code 3DG02..
Nipple, 1/2 In, Thrd at Both Ends, 4 In, 316
- Price For: Each Hardness: Shore A: 61 Tolerance: - Item: Tubing Length: 50 ft. Temp. Range (F): -75 To 275 Outer Jacket Thickness: - Type: Norprene(R), A-60-G Inside Dia.: 1/8" Outside Dia.: 1/4" Wall Thickness: 1/16" Max. Pressure (PSI): 19 psi @ 73 Degrees F Burst Pressure (PSI): 95 psi Vacuum Rating (Inches Hg): 29.9 in. Hg. Color: Black.
- Material: Thermoplastic Elastomer Country of Origin (subject to change): United States.