ReviewsShort Toggle Bolts

binifiMux 26 Pieces Toggle Bolt and Wing Nut Assortment Kit for Drywall Hanging Heavy Items 1/8' 3/16' 1/4'

【#】 Include size: 1/8"-2", 3/16"-2", 1/4"-3".
【#】Product name: Drywall Toggle Bolts Anchors Wing Nuts Kit.
【#】 Used for drywall, wallboard and all hollow based place, help household jobs like tv mounted / holding mirrors / / toilet paper roll / wall shelf / curtain rod / closet / towel bar and other cases without studs..
【#】 Package: 3 Sizes Assorted Toggle Anchors in one Storage Box..

Check Stock

MARRTEUM 3/16\ Toggle Bolt and Wing Nut Zinc Plated Steel Toggle Drywall Anchors Screws for Hanging Heavy Items, 20 PCS

✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..

Check Stock

The ROP Shop Spare Tire Wheel Carrier Kit with Hardware Heavy Duty for Many 6 & 8 Lug Trailers

Spare Tire Wheel Carrier Kit with Hardware, Heavy Duty for Many 6 & 8 lug Trailers.
Specs - Short Nut & Bolt Specs: Length - 1.25", Diameter - 0.5", Thread Type - Course, Long Nut & Bolt Specs: Length - 4", Diameter - 0.30", Thread....
Includes - Brackets, (2) Short Bolts, (4) Long Bolts, (2) Nuts for Short Bolts, (4) Nuts for Long Bolts, (4) Washers for Long Bolts.
Will not fit all 6 & 8 lug rims. Refer to dimensions before purchasing..

Check Stock

The Hillman Group 370054 Toggle Bolt, 3/16X3-Inch, 50-Pack

【Sizes】There are three sizes selected for you, includes: 12 pieces 1/8 inch, 8 pieces 3/16 inch, and 4 pieces 1/4 inch. 24 pieces in total. Different sizes and enough quantities can meet your different longtime using..
【Material】Our toggle bolts are made of zinc plated steel, uniform coating, strong adhesion and long service life, meanwhile, smooth surface because of using advanced automate production process to ensure processing accuracy, which make the product appearance is exquisite..
【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber b....

Check Stock

KAISH LP Guitar 3 Way Toggle Switch with Nickel Metal Tip for Epiphone Les Paul SG

High qaulity 3 way toggle switch with metal tip.
Perfect for Semi-hollow, or narrow solid body (non-carved top) Les Paul's - Epiphone and Juniors.
Threaded shaft 12mm diameter；Threaded shaft height 9mm.
Package Includes one 3 Way Toggle Swtich.

Check Stock

HELIFOUNER 24 Pieces Toggle Bolt and Wing Nut for Hanging Heavy Items on Drywall - 1/8 Inch 3/16Inch 1/4Inch

【Sizes】There are three sizes selected for you, includes: 12 pieces 1/8 inch, 8 pieces 3/16 inch, and 4 pieces 1/4 inch. 24 pieces in total. Different sizes and enough quantities can meet your different longtime using..
【Material】Our toggle bolts are made of zinc plated steel, uniform coating, strong adhesion and long service life, meanwhile, smooth surface because of using advanced automate production process to ensure processing accuracy, which make the product appearance is exquisite..
【Unique Design】The spring can be folded into the drill hole without the need to unscrew the screw, and the installation is simple, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
【Easy To Install】First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
【Wide Applications】It can be used for hollow brick, gypsum board, cement fiber b....

Check Stock

Simpson Strong-Tie FT18250C25 3/16\FlipToggle Anchor with 2-1/2\ Bolt, 25ct

...ronment like high temperature, cold weather, and high humidity areas. They have superior rust resistance and the excellent of oxidation resistance, which can ensure long time using..
【INSTALLATION】--- First, you need to drill a hole (big enough to thread through collapsed spring-loaded wings) and then poke these toggle bolts through the hole. At this time, the wings would release and clamp on the inside, then pull the bolt back down tight, please noted that you should leave enough room for wings to release. Finally, better use an electric screwdriver to screw the bolt in..
【PACKAGE】--- All of toggle bolts and wing nuts are packed in a durable and sturdy Box to efficiently bear the weight of the whole package. In order to avoid the screws being scattered or lost during use, we specially package for each different type of screws for your convenience and storage. Not only give you the best product, but also the best storage system for them..
【WIDE APPLICATIONS】--- Widely used for hollow brick, gypsum board, cement fiber board, wood board and other hollow substrates, Suitable for installing light fixtures such as lamps, curtain rods, photo frames, coat racks, power switches, what’s more, the product is highly adaptable, it can be installed qui....

Check Stock

48PCS Toggle Bolt and Wing Nut Set Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes 1/8 3/16 1/4

✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
✈【What You Get】- 48pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 20pcs 1/8inch, 16pcs 3/16inch and 12pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..

Check Stock

24PCS Toggle Bolt and Wing Nut Set, Camtek Toggle Bolt Zinc Plated Steel Phillips Round Head Toggle Bolt and Wing Nut Assortment Kit for Hanging Heavy Items on Drywall -3 Sizes(1/8'', 3/16'', 1/4'')

✈【HIigh Quality】- Camtek toggle bolt and wing nut are made of zinc plated carbon steel, rust resistance, corrosion resistance and durable enough for you to hanging items..
✈【Unique Design】- Built in spring line, the spring can be automatically opened behind the hollow substrate to form a large radius and large area contact, providing a reliable anchoring effect..
✈【What You Get】- 24pcs toggle bolt and wing nut assortment kit with 3 sizes in a storage box, easy to store and carry, it includes: 10pcs 1/8inch, 8pcs 3/16inch and 6pcs 1/4inch. Different sizes can meet your different needs. Note: The size of the bolts are all the same, all are 2.95inch..
✈【Wide Applications】- It can be used for hollow brick, gypsum board, cement fiberboard, wood board and other hollow substrates. Perfect for hanging curtain rods, towel bar, lamps, photo frames, shelf, flower pots, coat racks, projector, etc., suitable for lighter loads..
✈【Easy To Install】- Firstly, drill a hole (big enough to thread through collapsed spring-loaded wings) and then fold the two wings through the hole, the wings would release and clamp on the inside. Finally, screw the bolts..

Check Stock

UPANBIKE Bike Chainring M8 Bolts for Bike Chainring Or Chainring Guard 4 Sets 4 Sets Long Bolts

Made of 10B21 steel,super lightweight and durable..
Short bolts set compatible with single bike chainring..
Long bolts set compatible with double bike chainrings or one chainring+one chainring guard..
Package included:4 sets(one set including one bolt +one nut)..
Pay attention,this product listing have two choice,short bolts or long bolts,before place an order,please choose the right one you need,thank you for your understanding..

Check Stock

UPANBIKE Bike Chainring M8 Bolts for Bike Chainring Or Chainring Guard(4 Sets) (4 Sets Short Bolts)

Made of 10B21 steel,super lightweight and durable..
Short bolts set compatible with single bike chainring..
Long bolts set compatible with double bike chainrings or one chainring+one chainring guard..
Package included:4 sets(one set including one bolt +one nut)..
Pay attention,this product listing have two choice,short bolts or long bolts,before place an order,please choose the right one you need,thank you for your understanding..

Check Stock