ReviewsShrinkable Tubings

Saladulce Electric PVC Capsule Shrinking Machine SS Wine Bottle Capsule Heat Shrinker Thermostatic Digital Display for 70mm PVC Capsules (110V)

  • 【Application】Suitable for shrinking the heat shrinkable cap onto the wine bottle. Widely used on PP/PVC heat shrinkable capsules of wine bottles, soy sauce vinegar bottles and olives oil bottles and so on..
  • 【Simple Operation】Stainless steel material, simple in construction, easy to handle the heating. Automatic thermostat, real temperature can be displayed in time, easy to do..
  • 【Temperature Setting】Press SET to start the setting, press the left arrow to choose the single digit, the ten-digit, or the hundred-digit, then press the up/ down arrows to adjust the desired number, finally press SET to confirm..
  • 【Note】The diameter of the heating hole is 70mm, suitable for wine bottles with a mouth diameter less than 70mm (2.76 in)..
Check Stock

530Pcs 18650 Insulator Ring and 500Pcs (29.5mm10 Colors)18650 FlatFire Retardant PVC Battery Wrap Heat Shrink Tube for 18650 Batterie

  • 1. High quality PVC heat shrinkable tube of battery has excellent environmental protection, heat insulation, stable performance and rapid shrinkage. 5 mm, shrinkage temperature: 80 ℃, shrinkage rate: ≥ 48 ± 5%.
  • 2、 Length 72.5MM/2.85inch and width29.5MM/1.16in Round diameter: Φ18.7mm/0.74in 500个 PVC heat shrinkable tubes in 10 different colors, 50 in each color. Note: please put the product in a cool and dry place to avoid deformation caused by high temperature.
  • 3.Good insulation,corrosion resistance,tear resistance and wear resistance it have waterproof function.
  • 4.Safe and stable,better protection to avoid battery shorts,easy to peel and paste.
  • 5.Insulating ring Outer ring diameter: Φ18mm. Inner ring diameter: Φ10mm the thickness is 0.18MM.
Check Stock

XmucTech 120 Pcs 10#, 22-16 16-14 12-10 AWG Heat Shrink Ring Wire Connector Terminals Kit, Electrical Connectors - - Automotive Marine Ring Connectors

  • You gey 120 pcs: 40pcs 16-14 AWG(Blue), 40pcs 22-16 AWG(Red), 40pcs 12-10 AWG(Yellow).
  • Suitable wire: 0.5-1.5mm²/22-16 AWG (Red), 1.5-2.5mm²/16-14 AWG (Blue), 4-6mm²/12-10 AWG (Yellew).
  • The ring terminal is made of high-quality pure copper to ensure maximum current and minimum resistance. The thick heat shrinkable tube ensures that your wires can be tightly connected, and the combination of the two ensures that your use is safe and convenient.
  • The heat-activated adhesive in the heat shrinkable tube can provide a good environment for preventing wire corrosion and waterproofing, which can be reduced to 1/3 of the original size, and the wires can be tightly combined.
  • Heat shrink connectors work for any electrical application including marine, auto, home, audio, and trailer wiring.
Check Stock

3/4 18FT Heat Shrinkable Braided Tubing Tightly Woven Shrink Sleeve Flexible for Bundles Automobile & Marine Rubber Hoses Harness Wiring

  • 【Shrinkable Braided Material】 Our heat shrinkable braided tubing consists of tightly woven polyester multi-fibers and specially modified polyolefin filaments, making it the only shrinkable fabric of its kind. This unique weave structure makes it very flexible and can be bent and deformed at will without affecting its use. It is particularly suitable for installation on irregularly shaped or oddly shaped objects, providing secure wire loops or end protection for braided sleeve items..
  • 【Tight & Strong Shrinkage Performance】 Our heat shrink braided tube automatically shrinks to 1/2 of its original size when it reaches shrinkage temperature, increasing the inner wall thickness of the tube and greatly enhancing the tightness and protection of the tube. No additional fixing is needed to tightly bind the cable bundle and effectively prevent it from slipping off. Excellent firmness and protection for the parts to be enclosed..
  • 【Exceptional Abrasion & Cut Resistance】 Our heat shrink tubing has a tightly woven structure that makes the product highly flexible and provides excellent protection against abrasion, chaffing and cutting. This special weave structure will not come apart at the cut even if it needs to be cut or slit. Ideal for protect....
Check Stock

Ignition Switch with Key, 4 Position Universal Key Ignition Switch 12v for Car, Truck, Tractor, Trailer, Forklift, and More, Acc/Off/IGN/Start

  • 【Ignition Switch with Key】Universal Key Ignition Switch compatible with car, truck, tractor, trailer, forklift, and more equipment. Rated 30A at 12v DC..
  • 【4 Position Acc/Off/IGN/Start】4 Position Ignition Key Switch controls 4 functions, Acc/Off/IGN/Start. Come with a pack of heat shrinkable sleeves, easy to connect wires..
  • 【Premium Quality】The ignition switch is made of high-performance ABS and high-quality brass, with safety, durability and excellent conductivity..
  • 【Easy to install】Designed with a screw lock-nut, simply connect wires to the appropriate stud. Note: this switch does not need to be grounded. Your loads connected to the switch need to be grounded..
  • 【Package List】Package includes 1* ignition switch, 2* keys, 1 pack of heat shrinkable sleeves. pls contact us freely if you have any questions for our ignition switch with key..
Check Stock

Ameda Dual HygieniKit Milk Collection System w/One Hand Breast Pump Adapter

  • Includes 2 silicone diaphragms, 2 breast flanges (25.0 mm), and 4white valves.
  • Includes 1 tubing adapter, 2 adapter caps, and 2 silicone tubings.
  • Comes with 1 one-hand breast pump adaptor and 4 oz. bottles with lock-tight sealing lids.
  • Silicone diaphragm works as a barrier between tubing and the bottle.
Check Stock

DIY Battery Pack PVC Heat Shrink Wrap Tube,Length 3M Flat Width 150±1MM for Big Battery Pack Power

  • 1.Heat Shrinkable Tubing Thicknessl is 0.15MM,Length is 3M..
  • 3.Warm Reminder :Battery Heat shrink Tubing Width is 150±1MM .So Pls calculate ur battery pack or mechine size exactly,IF not ,it will too big or small .coz I hope i dont waste ur time and hope u have a Happy Shopping..
  • 4.PVC Heat Shrink Tubing is a thin-wall, low cost material offering good electrical and mechanical characteristics. When exposed to heat in excess of102 degree for a few seconds, the specially formulated polyvinyl chloride material will shrink rapidly andȀ㯸Ȁ㯸 ⾯Ȁ䃸Ȁ䃸 クȀ磸Ȁ磸 ㆯȀ铸Ȁ铸 ㊯Ȁ꛸Ȁ꛸ ㎯Ȁ췸Ȁ췸 㒯Ȁ铹Ȁ铹 㖯Ȁ당Ȁ당 㚯Ȁ볹Ȁ볹 㞯Ȁ퓹Ȁ퓹 㢯 㢯.
  • 5.Shrinkable Plastic Tube Sleeve ,Applications include insulation and jacketing of batteries, capacitors and similar objects-a vast range of applications in the production of industrial equipment, toys, sporting goods, electronics, and consumer products..
Check Stock

Ks-Tek 5pcs GL45 Screw Caps with Pouring Ring for Laboratory Glass Bottles, Polypropylene, 45 mm (Blue)

  • Screw cap with 2 silicone plugs, fit GL 45 neck size bottle.
  • Cap Material: Polypropylene(PP) and PTFE insert, autoclavable.
  • Silicone adapter is elastic and seals both bottle and tubings tight.
Check Stock

DIY Water Cooling PETG Hard Tube Bending Kit for 16mm OD Rigid Tubing Hose

  • DIY bending tools for 16mm OD PETG rigid tubings / hose..
  • Includes Mandrels for 45/90/180 degree bends.
  • Silicone rod insert prevents kinks and to help promoting smooth bends while keeping inner wall diameter.
  • Recommended to use soapy water assists with tube insertion and tube heating..
  • Pre-drilled holes allow easy mounting of mandrels to flat surface.
Check Stock

Heat Shrink Tubing Kit,Mini Heat Gun + 328 PCS Heat Shrink Wrap Tube　2:1.

  • 328Pcs Heat Shrink Tube Shrinkage - It is 2:1 heat shrink ratio, and will shrink up to 1/2 of original, just use the mini heat gun heating for it 5 second..
  • High-quality heat gun: The hot air gun has two heat dissipation ports, and the service life can reach more than 5 years. 300W power is suitable for many DIY productions and can dissolve hot melt glue sticks and glue. Of course, it is definitely suitable for heat shrinkable tube..
  • Eight sizes high-quality heat shrink tubing for your choose, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. First turn on this mini hot air gun switch,then glue inside will soften and seal the connection..
  • [Product parameters] Heat gun ：The length is 22 cm, which can produce high temperature of 200 degrees Celsius, and the US plug. Heat-shrink Tubing: 8 sizes, 5 colors, the sizes are 1mm, 2mm, 3mm, 4mm, 6mm, 8mm, 10mm, 14mm..
  • [Product warranty:] The heat gun can be used for five years. If it is broken under normal use, it will be replaced for free within five years. The heat shrinkable tube is RoHS compliant and free of formaldehyde. VETIN only produces safety products..
Check Stock

Pastall Non Insulated Butt Connectors Kit 200pcs 22-10 Gauge Uninsulated Butt Connector 22-18AWG, 16-14AWG, 12-10AWG, Electrical Wire Crimp Ferrule Terminals with 45pcs Heat Shrink Tube

  • Good non insulated butt connectors: Made by high quality red copper, has good electrical conductivity. with tin plated on the surface, better anti-oxidation and corrosion resistance performance..
  • High Performance Wire Ferrule Cable Crimp Terminal : These butt connectors easy to connect with electrical wire, Wire stop structure is nice to insertion wire in right space, and make sure the effect of compression..
  • Easy to use: Make the wire connection easier and stronger, no matter whether you use it in home circuits, car repairs, motorcycle repairs, etc., making the work easier and more efficient..
  • 45pcs heat-shrinkable tubes: this connector kit has three sizes of connectors with 45pcs heat-shrinkable tubes..
  • Package Include: include 80pcs 22-18AWG, 60pcs 16-14AWG, 60pcs 12-10AWG total 200pcs Non-Insulated Butt Connectors packed in a plastic box, easy to store and carry..
Check Stock