ReviewsSidewall Register Supplier

Air Flow Decor 10x4 HVAC Vent Cover Sidewall/Ceiling Adjustable Register, Outside Dimensions: 11.75\w X 5.75\h

  • Air Flow Decor 10x4 HVAC Vent Cover Sidewall/Ceiling Adjustable Register, Outside Dimensions: 11.75"w X 5.75"h.
  • Measure the wall/ceiling open to determine which size grille you should be ordering..
  • All grilles comes with 1/4" phillips head white head screws.
  • Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment.
  • Heavy Duty steel with durable white powder coating..
Check Stock

ELIMA-DRAFT174 Magnetic Solid Vent Cover for HVAC Commercial Vents 24 X 24

  • ABS Plastic: The vent cover is made of high quality ABS plastic material. Decorates your room with smooth and shine surface, also easily cleaned..
  • 3-Way Design: The opening grille covers is 3-way design, air blows in three directions with manual adjustment..
  • Manual Adjuster: A manual adjuster is on the right side of the register, you can push up / down the button to adjust..
  • Easily Installed: Packed with two screws (Please check before installation). Check your square duct size before purchasing. Panel size: 300mm x 200mm....
  • Wide Application: Ceiling / sidewall mounting is allowed to connect your HVAC, air ventilation system. Ideal as an inlet vent cover to exhaust bad....
Check Stock

24 X 18 Steel Return Air Filter Grille for 1 Filter - Fixed Hinged - Ceiling Recommended - HVAC Duct Cover - Flat Stamped Face - White [Outer Dimensions 26.5 X 19.75]

  • Removable hinged face accepts nominal 1-in thick filters for easy installation and cleaning.
  • The number of louvered columns and mounting holes will vary based on the size of the grille ordered.
  • Listed product sizes refer to the duct opening measurements, not the register itself.
Check Stock

DGQ Unbreakable Air Deflector 10

  • Unbreakable & Durable - DGQ heat and cold air deflectors are made of quality policarbonate material, high transparent, unbreakable and durable, heat resistant up to temperature 212F / 100C..
  • 10" to 14" Width Adjustable - 2-3/4 inch tall, this air deflector can be adjusted from 10 to 14 inches to fit on a variety of metal vent covers and registers..
  • Powerful Magnets - Held in place over your vent with the powerful magnets, which allows you to easily install on any metal vent registers, like steel floor vents..
  • Energy & Money Saving - Save on your heating and cooling costs all year round with this register deflector, redirects cool and warm vent air from under your bed, chair or sofa and into the room for your comfort..
  • Widely Use - It will come with 1 set of DGQ air deflector for only 1 vent. The transparent material makes it suitable for any scene, DGQ air deflector works as a vant deflector for floor vents, sidewall, ceiling registers and can be used all around the home, office, work place, super market, etc..
Check Stock

Double Edge Safety Razor

  • Unique design from the original designers of the DE8 Edwin Jagger Double Edge Safety Razor range, offers a very close, comfortable shave, with very low cost blade replacement it saves you money every day.
  • Comfortable weight and balance for accurate, close shaving. This is an ideal razor, with a blade angle perfectly suited for both new and experienced Double Edge wet shavers.
  • Smart polished cream acrylic handle. Collar clearly clearly branded Edwin Jagger for authenticity.
  • A genuine Edwin Jagger design Double Edge Safety Razor from an internationally renowned supplier, based in Sheffield England. Register your new razor with the manufacturer for authenticity and years of excellent product support.
  • The two-part DE razor head is compatible with all standard Double Edge Safety Razor Blades and includes a FREE 5 blade pack of blades. Delivered in smart Edwin Jagger packaging, with instructions, traditional wet shaving advice and product registration information.
Check Stock

Edwin Jagger Double Edge Safety Razor

  • Unique design from the original designers of the DE8 Edwin Jagger Double Edge Safety Razor range, offers a very close, comfortable shave, with very low cost blade replacement it saves you money every day.
  • Comfortable weight and balance for accurate, close shaving. This is an ideal razor, with a blade angle perfectly suited for both new and experienced Double Edge wet shavers.
  • Smart polished black acrylic handle, with the Edwin Jagger name embossed into the chrome plated collar, a guarantee of authenticity.
  • A genuine Edwin Jagger design Double Edge Safety Razor from an internationally renowned supplier, based in Sheffield England. Register your new razor with the manufacturer for authenticity and years of excellent product support.
  • The two-part DE razor head is compatible with all standard Double Edge Safety Razor Blades and includes a FREE 5 blade pack of blades. Delivered in smart Edwin Jagger packaging, with instructions, traditional wet shaving advice and product registration information.
Check Stock

Magnetic Vent Cover –8 x 15.5 Extra Thick Wall/Floor/Ceiling Vent Covers 4-Pack That Will Reduce Sound Very Flexible and Will Stick to Your Vents – Made from Premium Magnets by Kelbert

  • Steel construction for sidewall or ceiling application.
  • Three-way air deflection with multi-shutter damper.
  • The number of louvered columns and mounting holes will vary based on the size of the grille ordered.
  • Listed product sizes refer to the duct opening measurements, not the register itself.
Check Stock

24 X 24 Adjustable AIR Supply Diffuser - HVAC Vent Cover Sidewall or Ceiling - Grille Register - High Airflow - White [Outer Dimensions 25.75 w X 25.75 h]

  • 24"w X 24"h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 25.75"w X 25.75"h - SEE BELOW IN DESCRIPTION....
  • LOUVERED Adjustable Register Grille for Sidewall or Ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and....
  • QUALITY PACKAGING - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment - Hand Inspected for Quality.
  • EACH INDIVIDUAL FIN IS ADJUSTABLE FOR MAX AIRFLOW CONTROL – Adjust The Fins To Open or Close From the Front - Easy Unrestricted Air Flow Deflection....
Check Stock

Edwin Jagger Double Edge Safety Razor

  • Unique design from the original designers of the DE8 Edwin Jagger Double Edge Safety Razor range, offers a very close, comfortable shave, with very low cost blade replacement it saves you money every day.
  • Comfortable weight and balance for accurate, close shaving. This is an ideal razor, with a blade angle perfectly suited for both new and experienced Double Edge wet shavers.
  • Smart chrome handle with precise lined patterning for improved wet grip and the Edwin Jagger name embossed into the chrome plated collar, a guarantee of authenticity.
  • A genuine Edwin Jagger design Double Edge Safety Razor from an internationally renowned supplier, based in Sheffield England. Register your new razor with the manufacturer for authenticity and years of excellent product support.
  • The two-part DE razor head is compatible with all standard Double Edge Safety Razor Blades and includes a FREE 5 blade pack of blades. Delivered in smart Edwin Jagger packaging, with instructions, traditional wet shaving advice and product registration information.
Check Stock

Edwin Jagger Double Edge Safety Razor, Chrome, Regular Handle, 5 blades

  • Unique design from the original designers of the DE8 Edwin Jagger Double Edge Safety Razor range, offers a very close, comfortable shave, with very low cost blade replacement it saves you money every day.
  • Comfortable weight and balance for accurate, close shaving. This is an ideal razor, with a blade angle perfectly suited for both new and experienced Double Edge wet shavers.
  • Flawless, smooth chrome handle. Collar clearly branded Edwin Jagger for authenticity.
  • A genuine Edwin Jagger design Double Edge Safety Razor from an internationally renowned supplier, based in Sheffield England. Register your new razor with the manufacturer for authenticity and years of excellent product support.
  • The two-part DE razor head is compatible with all standard Double Edge Safety Razor Blades and includes a FREE 5 blade pack of blades. Delivered in smart Edwin Jagger packaging, with instructions, traditional wet shaving advice and product registration information.
Check Stock

10" x 4" ADJUSTABLE DIFFUSER - Vent Duct Cover - Grille Register - Sidewall or Cieling - High Airflow

  • 10″w X 4″h Is The Size For The Duct Opening Measurement Only Actual Front End Frame Outer Dimensions Are 11.75″w X 5.75″h – SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE.
  • High Quality Steel Construction, No Scuff Powder Coat Durable Finish, Smooth, Shiny, Scratch-Resistant, No Sharp Edges, 2 Recessed Screw Holes On Each Side with Screws Included, Screws Same Color As Vent Cover, EASY INSTALLATION.
  • LOUVERED Adjustable Register Grille for Sidewall or Ceiling Application, Easy Opening and Closing Back Dampers For Better Airflow Control, Quiet and Smooth Control Lever, Noise Free Components.
  • QUALITY PACKAGING – Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment – Hand Inspected for Quality.
  • EACH INDIVIDUAL FIN IS ADJUSTABLE FOR MAX AIRFLOW CONTROL – Adjust The Fins To Open or Close From the Front – Easy Unrestricted Air Flow Deflection For Your HVAC System.
Check Stock