ReviewsSight For Glock

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Batte....
Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of thos....
Check Stock

Universal OWB Holster Fit Glock/ /Beretta / Taurus/EAA / IWI / HK / Ruger / Springfield / CZ.Outside Waistband Carry Holster Adjustable Retention Index Finger Release,Right Hand

  • FOR GLOCK PLATFORMS: Comprehensive armorer gun multitool is compatible with any Glock pistol..
  • FRONT SIGHT TOOL: Magnetic 3/16" hex driver fits stock and custom front sights, compatible with Glock night sights, aftermarket tall height sights,....
  • 3MM PUNCH DOWN TOOL: Essential Glock armorer tool fits all pins on any Glock gun.
  • aids gun disassembly for gun cleaning, pin removal and custom Glock....
  • REAR SIGHT TOOL: . 050" Allen wrench allows for adjusting aftermarket rear sights for your Glock..
  • COMPACT GUNSMITHING TOOL: Small flat blade screwdriver helps prying slide lock spring & locking block. Also perfect for other accessories such as....
Check Stock

Real Avid 4-in-1 Tool for Glock Handguns, Compact Gun Multitool with Front & Rear Sight Tool, Punch Tool & Gunsmithing Screwdriver for Cleaning & Maintaining Glock Pistols

  • FOR GLOCK PLATFORMS: Comprehensive armorer gun multitool is compatible with any Glock pistol..
  • FRONT SIGHT TOOL: Magnetic 3/16" hex driver fits stock and custom front sights, compatible with Glock night sights, aftermarket tall height sights, Truglo Glock sights, Trijicon Glock sights and more..
  • 3MM PUNCH DOWN TOOL: Essential Glock armorer tool fits all pins on any Glock gun.
  • aids gun disassembly for gun cleaning, pin removal and custom Glock accessories pin installation.
  • REAR SIGHT TOOL: . 050" Allen wrench allows for adjusting aftermarket rear sights for your Glock..
  • COMPACT GUNSMITHING TOOL: Small flat blade screwdriver helps prying slide lock spring & locking block. Also perfect for other accessories such as light, laser or red dot and Holster maintenance..
  • ERGONOMIC DESIGN: Sleek, lightweight frame stores all the tools and features push button release to snap open the tools..
  • COMPATIBLE: With Glock models, 19,17, 43, 26, 22, 48, 27, 45, 21, 42, 30, 34, 20, 44 and more..
Check Stock

ADE Optic Mounting plate for Glock(Non-MOS,Non-Aftermarket Slide), Taurus GX4,G3C, Canik TP9SF to fit Vortex Venom/Viper, Burris Fastfire, ADE RD3, Sightmark Minishot, Doctor Red dot

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium), Vortex venom/viper, burris fastfire, meopta, shield, docter, insight Red dots..
  • This optic mounting plate also fits other red dot brands such as Vortex Venom/Razor/Viper, Burris Fastfire,Meopta,Docter, Insight. Does Not fit trijicon rmr/holosun/shield footprint red dots..
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if user has gunsmith experiense, or hiring a gunsmith to install this optic plate. Unprofessional installation such as improper torque will ....
Check Stock

HIVIZ Glock Overmolded Fiber Optic Tactical Front Sight Green

  • fits: all glock's, except for ported or compensated models.
Check Stock

Ade Advanced Optics RD3-012-G Green Dot Micro Mini Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn bright up and one to turn down. Hold the down button for 3 secs to power off. Every time you turn on the dot it stays the same brightness level last time it was turned off.
  • Comes with a picatinny mounting base. It is also compatible with varies handgun mounting plates(SOLD SEPARATELY) that replace rear sight dovetail. It is also compatible to Optics Ready pistols such as Glock MOS, Springfield OSP, Taurus TORO using Pistol manufacturer provided optic mounting plate(SOLD SEPARATELY)..
  • This GREEN dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight. This glock MOS #01 plate need to obtain from glock, not included in this green dot purchase..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo..
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was turned off.
Check Stock

Swampfox Kingslayer Pistol Cut RMR Foot Print 1x22 Micro Reflex Dot Sights 3 MOA (Red Dot)

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • Does NOT fit glock with AFTERMARKET slide with optic cut. We have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • The included optic plate for glock also fits Taurus GX4, G3C & G3 with steel rear sights.
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture. Fully windage and elevation adjustable and lockable.
  • 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • 【Designed to Last】Made of tough and durable steel with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
Check Stock

3D Metal Rear Slide Cover Back Plate for Gen 1/2/3/4/5 Glock 9mm/10mm/.40/.45/.357/.380/.22lr Magazine Accessories, Black Skull Red Eyes

  • Glock red dot base plate fits for Glock 17 19 22 23 26 27 34 35 37 41. This highly durable,lightweight,low profile.
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight Fits Vortex Viper/Venom micro red dot sight.
  • Fits Burris Fastfire micro red dot sight(Notes: the screws included in the package are not long enough for some Burris red dot sights, you can use the screws in the red dot).
  • Replace the rear sight slot with mini red dot base plate. Note: Not fit for RMR, RMS, DOCTOR..
  • Attaches firmly to your firearm for sure performance in tactical situations.
Check Stock

PTOUGE Glock Tool Kit, Front Sight Tool, Magazine Disassembly Tool Pin Punch Tool for Glock 19 26 27 43 Accessories (Glock Tool kit)

  • Magazine Disassembly Tool: Removal and installation of Glock front sights.
  • Front Sight Installation Hex Tool to aid in the installation and removal of front sights on Glock pistols.
  • Pin Punch Tool is a disassembly tool for removing pins on all Glock pistols.
  • Made of durable metal, Tool set compatible with Glock: Magazine Disassembly / Front Sight Installation Hex Tool / Disassembly Tool.
  • Tool Kit Compatible with Standard Glock 9/40mm, Models: G17, G19, G20, G21, G22, G23, G24, G25, G26, G27, G28, G29, G31, G32, G33, G34, G35, G36, G37, G38, G39, G40, G41ect. Please note: The Tool kit does not work on the Glock 30 round magazines or extended type base plates..
Check Stock