ReviewsSight Glass Flow Rate Meter Gauge

DAE MJ-100 1\ NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons

  • Horizontal mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer to DAE PD-100 (B08D7356MY), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards..
  • Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website..
  • Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
  • Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also....
Check Stock

PneumaticPlus SAU430-N04G-MEP 3 Stage Compressed Air Filter Dryer System - Particulate Air Filter Coalescing Air Filter Compressed Air Pressure Regulator Combo 1/2 NPT - Metal Bowl Manual Drain

  • Max. Supply Pressure: 250 PSI/ Max. Operating Pressure: 0-150 PSI.
  • SAF: 10 Micron Particulate Element, SAFM: 0.1 Micron Coalescing Element / Flow Rate: 37 SCFM @ 90 PSI.
  • Manual Drain, Metal Bowl w/ Sight Glass, Port Size: 1/2" NPT.
  • Use Metal bowl in pressure exceeding 150 PSI or when solvents harmful to polycarbonate is present.
Check Stock

Argon CO2 Regulator - Welding Gas Flowmeter For TIG MIG - Brass Construction Flow Meter For Argon and CO2 Welder Tanks CGA580

  • ARGON/CO2 REGULATOR FOR WELDING: Terrabloom Argon Gas Flow Meter Regulator is Designed for Professional TIG/MIG Welding Applications. It Provides an....
  • ARGON FLOWMETER WITH PRESSURE GAUGE: In addition to allowing to adjust gas flow rate, our Argon CO2/Argon flowmeter contains a pressure gauge that....
  • TIG/MIG FLOWMETER INSTALLATION: TerraBloom Welding Pressure Regulator Seamlessly Connects To Standard Argon/Helium/CO2 Tanks with CGA-580 Inlet....
  • VERSATILE APPLICATIONS FOR CGA-580 Tanks: This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet).
  • WARRANTY: Covered by TerraBloom's 30-day money back guarantee. 1 Year Warranty Against Manufacturing Defects.
Check Stock

DAE AS200U-75 Water Meter, 3/4\ NPT Couplings, Measuring in Gallons

  • Horizontal Inline mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer toDAE V-75. Or DAE PVM-75, DAE VM-75P which can be installed in any position, vertically or horizontally, water flowing downwards or upwards, dial facing upwards, downwards or side-way..
  • For upgraded AS200U-75P, Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone..
  • For upgraded AS200U-75P, ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also use with DAE AMR130 (Auto Meter Reading Module for single water meter) and AMR (for 16 water meters) for remote reading (5th picture)..
  • For product description, you can also refer to “Specification Sheet” in “Product guides and documents”. To install the DAE 3/4" water meter with the 3/4" garden hose at both ends (or one end with hose bibb and the o....
Check Stock

DERNORD Sanitary Sight Glass 1.5 Tri-clamp with Stainless Steel 316 Cage Protection

  • In-light Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
  • Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
  • In-line Sight Glass with Clamp End, SUS316 body material.
  • Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal....
  • The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.
Check Stock

DERNORD Tri Clamp In-Line Sight Glass with Flow Sanitary Straight Sight Glass SUS316 1.5 Inch Tri Clamp Clover Type (Flow Pipe OD 38MM)

  • In-line Sight Glass Flow Pipe OD:38MM, Ferrule OD:50.5MM, Fits Tri-clamp:1.5".
  • In-line Sight Glass Max Pressure: 120 PSI,Max Temperature: 300 Fahrenheit.
  • In-line Sight Glass with Clamp End, SUS316 body material.
  • Full bore design,Sight Glass Flow Indicators provides a full 360 to observe fluid flow in any direction. Can be used in vertical or horizontal position.
  • The Sanitary Sight Glasses are designed for sanitary applications used in the food, dairy, and pharmaceutical industries.
Check Stock

BETOOLL HW9003 Argon/CO2 Mig Tig Flow Meter Gas Regulator Gauge Welding Weld

  • Brand New BETOOLL Argon / CO2 regulator and flow meter..
  • Flow Meters are more accurate than the flow gauge regulators..
  • The pressure gauge which shows how much gas is left in the tank goes from 0 to 4000 psi..
  • And this flowmeter does not use a diaphragm, so it is more reliable than the flow-gauge style regulators..
  • The output flow is adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube..
Check Stock

Genuine TERA PUMP 33.5-49" IBC Totes Plug-in Electric Drum Barrel Pump with Flow Meter and Telescopic Tube for DEF/Diesel/Kerosene/Antifreeze/Agricultural Chemicals

  • Electric 12V power drum pump with flow meter and telescopic suction tube.
  • Flow Meter measures flow rate of liquid running through our pump.
  • Application: Engine oil, Hydraulic fluid, DEF, Diesel, Kerosene, Washer Fluid, Antifreeze, Non-Potable Water and more.
  • Flow Rate: 7.1 Gallon per Minute or 26 Liters per Minute.
  • Attention: Pump is NOT Compatible with Acids, Alkalis, Corrosive media, Solvents, Acetone, Lacquer, Mineral Oils, Solvents, Turpentine, Heavy Oil or Drinking Water.
Check Stock

PneumaticPlus SAU2000M-N02DG-MEP Mini Three-Unit Combo Compressed Air Filter Regulator Lubricator FRL, Air Preparation Unit 1/4\ NPT - Metal Bowl, Auto Drain, Gauge

  • HEAVY DUTY 1/2" COMBINATION FILTER-REGULATOR-LUBRICATOR. PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER..
  • COMES EQUIPPED WITH WALL MOUNTING BRACKET AND BACK MOUNT PRESSURE GAUGE..
  • FILTER: 250 PSI MAX - 5 MICRON FILTER - 5oz METAL BOWL CAPACITY AND VISUAL SIGHT GLASS..
  • REGULATOR: 7 - 225 ADJUSTMENT PRESSURE - 250 PSI MAX..
  • LUBRICATOR:OIL FILL ADJUSTMENT TO REGULATE OIL FLOW - 5.1oz OIL CAPASITY AND VISIBLE SIGHT GLASS..
Check Stock

Goplus 1/3HP 4CFM Single Stage Rotary Vane Vacuum Pump and R134a Manifold Gauge Set, HVAC A/C Refrigeration Kit, Including Vacuum Pump, A Bottle of Vacuum Pump Oil, Suitable for R12, R22, R134

  • ...y. This AC system requires 500 microns ultimate vacuum delivering better than 150 microns to meet your vacuum requirements..
  • 【Multifunction Manifold Gauge】The HVAC service gauge set is excellent for diagnosing and repairing AC systems. The manifold comes with oversized sight-glass for easy viewing the refrigerant flow, and the high-quality gauge ensures high accuracy of the reading. It’s ideal for R12, R22, R134, and could be suitable for R410a after configuring the adapters. It does not include the adapter, but you can easily buy it locally or on Amazon..
  • 【Three-Color Coded Hoses】There are yellow, blue, and red hoses, each equipped with brass fittings. The fittings are 45 degrees on one hand and straight on the other, providing a leak-proof seal. The three hoses are 36" in length. All hoses comply with the SAE-J2196 standard. The working pressure of the hoses is 800PSI - 4000PSI and its acceptable refrigerant are CFC, HCFC, and HFC..
  • 【A Complete Refrigerant Tool Kit】This tool kit is a complete set for Mini-split/ HVAC and AUTO AC refrigerant recharging, including a vacuum pump, a pressure gauge set, 3 mu....
Check Stock

1' Inline Air Compressor In Line Water Moisture Filter Trap Separator Auto Drain

  • 185 CFM Flow Rate 1" FPT Air Inlet port 1" FPT Air Outlet port 5 micron filter element. Wall mounting bracket included Sight Glass on Metal bowl to view your moisture level & Auto drain 250 PSI Max Input pressure Drain capacity 300ml Oil capacity 350ml.
Check Stock