ReviewsSight Shield

Mbus Generation 2 Backup Sights Front and Rear Flip Sights-Black

  • Protective wings shield the spring-locking A2 front sight post.
  • Elevation adjustment tool included, but most aftermarket A2 front sight adjustment....
  • Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 rail and provides the same height-over-bore as standard A2 irons.
  • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc..
  • Spring-loaded flip up sight easily activated from either side or by pressing the top.
  • Impact resistant polymer construction provides light weight and resists operational abuse.
Check Stock

BUtterfield 8 (Penguin Classics)

  • Universal handgun sight pusher tool makes a perfect fit for square slides,not for angles or notched slides like XD, XDM or Shield..
  • Sight pusher tool have vertical adjustment and a Ridged solid jaw to support the slide and not allowing it to easily move in a vertical or horizontal direction while in use..
  • Sight pusher tool is designed to adjust or replace dovetail handgun sights..
  • Easy to use, recommend you wrap your slide in a folded up paper towel or other material to protect your slide..
Check Stock

Rexka 10pcs Sight Shield & Trim Push-Type Retainer Compatible with GM 10382313 Cadillac STS, Pontiac Solstice and Saturn Sky 2009-05 Land Rover LR024316 Range Rover Evoque Jaguar XR812941

  • Other Names/GM:Partition Panel Clip. Radiator Support Access Cover Clip. Radiator Support Air Deflector Clip. Radiator Support Air Deflector Screw. Sight shield,retainer. Access Cover. Air Deflector Screw.
  • Other Names/Land Rover/Jaguar:Cowl Grille Panel Clip. Cowl Panel Clip. Engine Air Intake Hose Clip. Radiator Support Access Cover Clip. Radiator Support Splash Shield Clip. Side Cover,retainer Clip. Battery retainer. Cowl Grille Panel. Engine Air Intake Hose. Intake duct. Mount bracket retainer. Pin. Radiator Support Access. Radiator Support Splash Shield. Side retainer. Sight Shield..
  • Fits Cadillac STS, Pontiac Solstice and Saturn Sky 2005 - On.
  • Fits Defender 110, Defender 90, Discovery, Discovery Sport, Range Rover, Range Rover Evoque, Range Rover Sport: Fits all S-Type, X350, X150, X351, XF, F-Type, E-Pace models.
  • Meet or Exceed OEM Specification. Direct Fitment.Head Diameter: 24.5mm Stem Length: 13mm Fits Into 9mm Hole.
Check Stock

M&P 380 Shield EZ Holster, IWB Kydex Holster Fit: S&W M&P 380 Shield EZ Pistol, Inside Waistband Appendix Concealed Carry Holster for M&P Shield 380 EZ, Adj. Cant & Retention, Left Hand

  • 【M&P Shield 380 EZ Holster, US KYDEX&Design】 .08” US KYEDEX Custom for: S&W M&P Shield 380 EZ pistol, both comfortable and durable. Inside waistband concealed carry holster, preserve your shield 380 ez in perfect condition. (Note: Not fit M&P Shield 9mm EZ, Not Fit Any sight/laser/light).
  • 【Full Cover Mag Button, No Scratch, No Jitter】 The holster for S&W M&P Shield 380 EZ full covering all access to the trigger, which can avoid all possible accidents. 380 ez holster all edges are polished and smooth designed be exceptional consistency and accuracy. Smooth inside instructure can avoid scratching your love handgun. Full length sweat guard and rear sight shield to protect your weapon from sweat.
  • 【Adjustable ‘Posi-CLICK’ Retention, Fits Like A Glove】 Smith and Wesson 380 ez holster possess ‘Posi-CLICK’ Adjustable Audible Retention, you would hear a “CLICK” sound when your s&w shield ez 380 is securely holstered.
  • 【1.5’’ Belt Fit Perfect】 Smith & Wesson M&P Shield 380 EZ Holsters’ belt clip is suitable for 1.5’’ belt, with hook in buttom, it stick firmly in your belt while drawing and holding.
  • 【Adjustable Cant & Retention Pressure】 The Carry Angle (Cant) can adjust from -5° to 20°, use phillips screwdriver to custo....
Check Stock

Magpul Flip-Up Backup Sights, Olive Drab Green, Rear Sight

  • Impact resistant polymer construction provides light weight and resists operational abuse.
  • Spring-loaded flip up sight easily activated from either side or by pressing the top.
  • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc..
  • Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 rail and provides the same height-over-bore as standard A2 irons.
  • Protective wings shield the spring-locking A2 front sight post.
  • Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be used as well.
Check Stock

vikofan Universal Handguns Sight Pusher Tool Fit for Glocks 1911 Sig and Others

  • Fitment：Universal handgun sight pusher tool fit for square slides,not for angles or notched slides like XD, XDM or Shield..
  • Sight pusher tool have vertical adjustment and a Ridged solid jaw to support the slide and not allowing it to easily move in a vertical or horizontal....
  • Material：Sight pusher tool made of 6061 Aluminum..
  • Sight pusher tool is designed to adjust or replace dovetail handgun sights..
  • Note：You wrap your slide in a folded up paper towel or other material to protect your slide..
Check Stock

Compatible with M&P Shield 380 EZ Holster, IWB Kydex Holster Fit: S&W M&P 380 Shield EZ Pistol, Inside Waistband Appendix Concealed Carry Holster for M&P Shield 380 ez, Adj. Cant & Retention, Right

  • 【M&P Shield 380 EZ Holster, US KYDEX&Design】 .08'' US KYEDEX Custom for: S&W M&P Shield 380 EZ pistol, both comfortable and durable. Inside waistband concealed carry holster, preserve your shield 380 ez in perfect condition. (Note: Not fit M&P Shield 9mm EZ, Not Fit Any sight/laser/light).
  • 【Full Cover Mag Button, No Scratch, No Jitter】 The holster for S&W M&P Shield 380 EZ full covering all access to the trigger, which can avoid all possible accidents. 380 ez holster all edges are polished and smooth designed be exceptional consistency and accuracy. Smooth inside instructure can avoid scratching your love handgun. Full length sweat guard and rear sight shield to protect your weapon from sweat.
  • 【Adjustable 'Posi-CLICK' Retention, Fits Like A Glove】 Smith and Wesson 380 ez holster possess 'Posi-CLICK' Adjustable Audible Retention, you would hear a "CLICK" sound when your s&w shield ez 380 is securely holstered.
  • 【1.5’’ Belt Fit Perfect】 Smith & Wesson M&P Shield 380 EZ Holsters’ belt clip is suitable for 1.5’’ belt, with hook in buttom, it stick firmly in your belt while drawing and holding.
  • 【Adjustable Cant & Retention Pressure】 The Carry Angle (Cant) can adjust from -5° to 20°, use phillips screwdriver to customize the CANT....
Check Stock

Mbus 2nd Generation- Black Flip Sight Group Front and Rear Spare Sight Group

  • Impact resistant polymer construction provides light weight and resists operational abuse.
  • Spring-loaded flip up sight easily activated from either side or by pressing the top.
  • Detent and spring pressure keeps sight erect but allows for unobstructed folding under impact, etc..
  • Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 rail and provides the same height-over-bore as standard A2 irons.
  • Protective wings shield the spring-locking A2 front sight post.
  • Elevation adjustment tool included, but most aftermarket A2 front sight adjustment....
Check Stock

Ade Advanced Optics NUWA (RD3-021) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO

  • Designed to fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365X/P365XL/P365XL SPECTRE COMP, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a di....
Check Stock

Cyelee CAT Shake Awake Micro Green Dot Sight, 3.5 MOA Reflex Sight for RMS/RMSC Footprint Optics Ready Pistol

  • Micro red dot sight fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, S&W Equalizer, SCCY DVG-1 RDR, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • EASE OF USE: Cyelee CAT Green Dot Sight is always powered on with shake awake function. After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting..
  • RUNTIME: Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 200 microampere powers to give a very long battery life.It is perfect for daily carry..
  • RELIABLE:Reliable Design, a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT Green Dot Sight is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options..
  • DURABLE: Constructed from aerospace grade alum....
Check Stock

Ade Advanced Optics Compact RD3-009 Red Dot Reflex Sight + Optic Mounting Plate for SW Smith Wesson MP/MP 2.0 Shield SD9VE,SD40VE Pistol and Also a Standard Picatinny Mount

  • Comes with an removable standard picatinny mount and handgun mount(replace rear sight) fits CERTAIN SW models such as Smith & Wesson M&P Full Size, M&P 2.0 Full Size, M&P 22 Full Size, M&P Compact, M&P 2.0 Compact, M&P Shield, SD9VE, SD40VE..
  • The pistol mount included for SW does NOT fit Smith & Wesson M&P C.O.R.E Series (Already optics ready), M&P Shield EZ .380, M&P .22 Compact, SW9VE, SW40VE, Sigma, 1911.
  • The pistol mount included for SW does NOT fit any EZ, 380, EZ 380 models, such as M&P SHIELD EZ, M&P 380 SHIELD EZ. Any Shield or MP model that is EZ or 380 this Optic Plate WILL NOT FIT..
  • This ADE RD3-009 Crusader have made several improvements since it's initial release in 2016. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon..
  • Waterproof/Shock/Fog Resistant. Lenses are precision ground and polished to exacting geometries to virtually eliminate parallax and to provide a very clear, crisp sight picture..
Check Stock