ReviewsSights For Glock 2

XS SIGHTS Glock Sight Pusher Tool, Inline Rear Sight Pusher Install Kit, Compatible with All OEM Glock Slides, DIY Series

  • FITS ALL OEM GLOCK SLIDES: Compatible with all Glocks and optic/suppressor height sights.
  • Can also be used for sight installation or windage adjustment on sights with an optic mounted on the pistol.
  • ALL-IN-ONE-KIT: Includes Inline Rear Sight Pusher for Glock Pistols.
  • Lucas Oil Products Extreme Duty Gun Oil (0.135 FL. OZ. / 4ml).
  • Vibra-Tite 131 High Strength Threadlocker (0.06 FL. OZ. / 1.8ml).
  • LIGHTWEIGHT & COMPACT: Lightweight aluminum and compact design makes it easy to carry and use on the go or at the range for sight adjustments.
  • SUPERIOR CRAFTSMANSHIP: Non-marring brass bit prevents any scratching of sights or slides.
  • Built-in centering scale with a 1/16" scale ensures precise sight adjustments.
  • EASY TO INSTALL & MAINTAIN: Tool lifespan up to 50-100 installations with proper care and maintenance.
  • With no need for pads, springs, or knob tightening, our kit helps you get the job done with just simple physics.
Check Stock

Suppressor Height Sights Set, Suppressor Sights for Precise Targeting, Front and Rear Sights Compatible for Glock 17 17L 19 26 27 33 34 38 39 All Models Except 42 and 43.

  • 【Designed to Last】Made of tough and durable steel with a fortress finish coating for maximum protection. The matte black will reduce any glare with some standard sights. The front sight comes with a mounting screw and the rear sight has a co-witness setup combo, which improves stability and visibility during the day..
  • 【Higher Brightness & Precise Shooting】These suppressor height Glock sights set are raised up allowing you to see over the top through the window, which largely help increase higher brightness and precise shooting..
  • 【Special Three-dot Sight Design】Sits just high enough over the body to see but not overly high that it would take too much real estate in glass window. The front sight is slim and the rears are wide which are great for fast sight acquisition..
  • 【Easy to Install】These suppressor height sights set works well with all optics co-witness and is very easy to install. Step1.Loosen the allen head on the glock with the hex key allen wrench and then clean the holes up. Step2. Pull the hex nut screw off and install the front sight. Step3. Put your finger on the front sight and put the screw back. Step4. Slide and push the rear sight. Use the sight pusher tool if you rear sight is tight, do not try to use a hammer and punch..
Check Stock

TRUGLO Glock Sight Installation Kit Glock Sight Installation Kit

  • Front and rear sight installation tools for Glock pistols.
  • Remove, install, or adjust factory or after-market sights.
  • Approved for use with tritium night sights.
  • Compatible with suppressor height sights.
  • Compatible with pistol Red-Dot sight mounts.
Check Stock

Real Avid Armorer’s Handgun Sight Pusher Sight Tool for Gunsmithing, grey/red

  • ACCURATE: Sight pusher sight adjustment advanced, precision tool to push, change, install and adjusts press fit dovetail front and rear sights on most striker-fire handguns and 1911 pistols.
  • ADJUSTABLE: reversible metal Press Block provides multiple pushing surfaces to accommodate a variety of sights..
  • works on dovetail slots down to 5/32” (4mm) wide.
  • accommodates tall sights up to ½” high.
  • 60-degree surface works with most common rear sight profiles.
  • LEVERAGE: Heavy Duty Torque Handle makes sight adjustments work more comfortable.
  • the integrated 3/8” rachet receiver gives additional leverage if you lack hand strength.
  • SECURE FIT: optional plastic clamps and protective pads help protect finish, while aligning, holding and securing slides. Reduce risk of marring..
  • VERSATILE: Slide cradle accommodates most makes and models of striker-fire handguns and 1911 style pistols Ideal for flat side slides.
  • compatible with Glock style slides, M&P, SIG Sauer P320 style and more. See Compatibility Chart for more information..
  • WORKBENCH TOOL: the Master Sight Tool can be secured directly to your workbench with included bench vise attachment ridge to accommodate numerous work space set-up p....
Check Stock

LIRISY Glock Tool Kit Front Sight Tool Magazine Disassembly Tool and Pin Punch Tool for Glock

  • Front Sight Tool: it is a 3/16’’ hex thin wall nut driver to install and remove the front sights on Glock pistols.
  • Pin Punch Tools: a disassembly tool for removing all pins on Glock pistols.
  • Magazine Disassembly Tool: Safely and easily disassemble your Glock magazines for cleaning and inspection without damaging.
Check Stock

Rear Sight Pusher Tool for Glocks Sight Removal Installation Adjustment Press Tool for Dovetail Sights

  • This sight pusher is designed, built, and assembled by hand in the United States. Each pusher is inspected for faults or errors, ensuring the highest quality product is being delivered directly to the consumer..
  • High grade polymer construction that won't scratch your new gun sights or your slide like metal pusher will.
  • Works for angled sights, flat sights, and suppressor height sights.
  • Portable design(6.13” x 3.5” x 1.06”) perfect for windage adjustments at the range.
Check Stock

Glock Gen 1-4 Factory OEM Night Sights 17, 19, 22, 23, 24, 26, 27, 33, 34, 35

  • ❤WIDE COMPATIBILITY - Our 3-Dot Night Sights apply to for Glock 17 17L 19 22 23 24 25 27 33 34 35 38 and 39 model..
  • ❤EASY TO ASSEMBLE - Standard 6.5mm rear guide pressed into a crosshair, The rear sight is ready to use by tightening it with the provided Allen key. The high precision altitude sight can work at night or during the day without batteries or switches, Unmatched Visibility in low light shooting conditions or complete darkness..
  • ❤PRECISION SHOOTING - Glow in the dark with 3 green dots(No Battery Required), allowing you to shoot more accurately when using the gun in the dark. When first used, a longer light source is needed to illuminate, When used again, it only needs 2-3 minutes of illumination to be used. Higher brightness after daylight or other strong light exposure..
  • ❤HIGH QUALITY - Made of Safer aluminum alloy material (No Tritium), lightweight and solid. The surface is covered with a high-grade anodic oxide layer, corrosion-resistant. with maximum protection..
  • ❤PERFECT CUSTOMER SERVICE - If you have any other questions about this custom Glock Night Sights product before or after the sale, please feel free to contact us, well reply you within 24 hours..
Check Stock

Recover Tactical GR19L Rail Adapter for Glock 19 and 23 Generation 1 and 2 No Modifications Required Installs in Under 3 Minutes

  • Magazine Disassembly Tool: The easiest and fastest way to remove base plates from the standard Glock magazines without any damage to the plates and....
  • Front Sight Installation Hex Tool: Magnetized hex tool to aid in the installation and removal of front sights on Glock pistols.
  • Armorers Disassembly Tool: Aid in the removal of pins and base plates on Glock pistols.
  • Comes with a handy pouch to storage these Glock tools.
Check Stock

Disassembly/Reassembly of the Glock Pistol

  • Lightweight and rugged injection molded polymer frame with durable aluminum alloy slide.
  • Fully licensed by GLOCK with complete rollmarks on the slide and logos molded to the frame.
  • Features the same ergonomics, function, and handling as the original.
  • Powered by a 12-gram CO2 cartridge (CO2 NOT included).
  • Features traditional GLOCK sights and a GLOCK Gen4 style frame with finger grooves removed.
  • Shoots 6mm plastic airsoft BBs at up to 300 fps.
  • Great for use in airsoft play, target shooting, and as a training tool.
Check Stock

DeSantis Gunhide Holsters Thumb Break Scabbard, Right, Black, Glock 19, 19X, 19 GEN 5, 45, 23, 32, 19 MOS, 19X MOS, 19 GEN 5 MOS, 45 MOS, 23 MOS, 32 MOS

  • Designed to fit the following firearms: GLOCK 19, 19X, 19 GEN 5, 45, 23, 32, 19 WITH REFLEX SIGHTS, 19X WITH REFLEX SIGHTS, 19 GEN 5 WITH REFLEX SIGHTS , 45 WITH REFLEX SIGHTS, 23 WITH REFLEX SIGHTS, 32 WITH REFLEX SIGHTS.
  • Presented at an optimum draw angle while offering an adjustable cant and retention level.
  • Its thumb break and exact molding, together with a tension device, allow for a secure and highly concealed carry.
  • Recommended carry position on hip or behind the hip.
Check Stock

Outerimpact Red Dot Adapter/Mount for Glock Pistol - M.R.A

  • Compatible Guns: All Glock models except MOS verions.
  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1272.
Check Stock