ReviewsSignal Emitter

SafBbcue 3 Pack Stainless Steel Cooking Grid for Charbroil 463242715, 463242716, 463276016, 466242715, 466242815

• Fits Charbroil 463242715 463242716 466242715 466242815.
• Char-Broil 463280219 463280419 Performance TRU-Infrared grill G530-B700-W1 cooking grate & emitter tray.
• Dimensions: 17 3/16″ x 10″ each, Total measurement of 17 3/16″ x 30″.
• charbroil grill replacement parts 463242716.
• Replaces Char-Broil cooking grate & emitter tray #G533-2200-W1.
• FITS CharBroil 463242715 463242716 463255020 463255721 463257520 463276016 466242715 466242716 466242815 466242816 grill replacement parts infrared.
• Replacement grates for Charbroil emitter plates 463242715 463242716 Charbroil grids 466242715 466242815.
• Replacement for char grill parts 463242716.

RetroDepth LT Lightweight Rechargeable DLP Link 3D Glasses for all DLP 3D Projectors (Benq, Optoma, Acer, Vivitek, Dell Etc) by Evolv3Dimensions (4 Pack)

• Improved signal receiver- virtually eliminates sync issues! and Light weight! Low cost!.
• Sturdy- built to last, but incredibly lightweight and comfortable!.
• Also works with Samsung DLP 3D TVs (2007-2010) and Mitsubishi DLP 3D TVs (2005-current).

Chanzon 10pcs TIP120 TO-220 NPN Darlington Transistor 5A

• High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
• Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
• Collector-emitter saturation voltage - VCE (sat) = 2 V (maximum) at IC = 3 A.
• Low collector-emitter saturation voltage.

Texas Instruments CD4017 CD4017BE CMOS Decade Counter with 10 Decoded Outputs DIP16 1 Pack

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

• IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
• Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
• Place the IR emitter blaster near the source sensor to repeat the signal to the source.
• Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
• IR Tx and Rx cables have adhesive circles on the back for mounting.
• USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
• Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
• Compatible with most A/V equipment with infrared sensors (not RF).

Cocar RF 3D Glasses Rechargeable Active Shutter RF 3D Eyewear Suitable for RF 3D TV & Projectors for Sony Epson Samsung JVC Compatible with SSG-5100GB TDG-BT500A Pack of 2

• [RF 3D Glasses] The active shutter 3D glasses use RF to transmit signals, works without emitter. Compared with traditional IR signal transmission, the....
• [Compatible Devices] The RF 3D active shutter glasses suitable for most of RF 3D signal TVs and 3D projectors. Compatible 3D RF projector: EPSON,....
• [Easy to Use] Rechargeable design 3d RF glasses, with ON/OFF switch. Auto 5 seconds Stand by and 5 minutes Shut Off. Not throwaway 3D glasses. High....
• [Quickly Pairing] When pairing, please make sure that the distance between the 3D glasses and the 3D device is less than 19.5 inches/50 cm. Press the....
• [RELIABLE AFTER-SALES SERVICE] Our company provide 12 months warranty. If the product has any problems, please feel free to contact us at anytime. We....

Sewell Direct BlastIR Wireless Pro Emitter Only Remote Control Extender (IR Emitter),SW-32988-TX

• Control any IR device from a distance. Blu-Ray Players, Cable and DVR Boxes, AV Receivers, Logitech Harmony Devices, Anything else that uses an IR signal!.
• 10-channel system that gives you the ability to interact with your devices without needing to worry about your Wireless Extenders interfering with one another.
• Included USB and AC power cables, extra IR cables, and mounting adhesive.
• Warning: Similar products do not support as many devices as the genuine BlastIR Wireless Pro. This kit is the only kit with the compatibility and accessory package that simply works out of the box.

Wall Pipe Blockage Detector 30Meters Pipeline Blocking Clogging Scanner Plumbers Instrument Diagnostic Tool for Steel Iron and PVC Pipes (UT661B)

• 【Premium Material】Made of high quality and durable ABS material, it has impact resistance and scratch resistance and has a long service life. Equipped with 4 spare probes, which can be replaced at any time, which can extend the service life of the product and improve work efficiency..
• 【Strong Signal Penetration】 The pipe plugging tester can pass through a wall with a thickness of 50 cm, reducing the removal area. It can accurately locate invisible blockages, detect the inside of blocked pipes, accurately locate..
• 【Waterproof Design】 Pipe plugging detector adopts IP67 waterproof probe, which can be used to detect various environments..
• 【Working Methods】 The pipeline blockage detector uses the principle of electromagnetic induction. The pipe blockage emitter probe emits electromagnetic waves, and the pipe blockage receiver receives electromagnetic waves. The blockage location is determined according to the signal strength..
• 【Wide Range of Applications】 it can be used for wall nails, metal pipes, PVC pipes, and even water pipes. Solve the problem of pipe blockage faced by construction engineers and home users..

4389102 Refrigerator Icemaker Emitter Sensor Control Board Kit Compatible for Whirlpool Maytag Kenmore Replace 2198586 2220398 W10757851 AP5956767 ADC9102 PS557945 AP3137510 by TOPEMAI

• 4389102 Refrigerator Icemaker Emitter Sensor Control Board Kit Replace Part Numbers: 2198585, 2198586, 2198588, 2220398, 2220402, 2255114, 4388635, 4389102R, AP5956767, AP3137510, PS557945, PS10064583, TJ4389102R, W10193666, W10193840, W10290817, W10757851..
• Refrigerator Ice Maker Emitter and Receiver Control Board 4389102 designed to fit specific Whirlpool manufactured refrigerator models including Maytag, Kenmore, Amana, Jenn Air and Magic Chef..
• 4389102 Refrigerator Control Board also know as 4389102 Ice Maker Emitter,4389102 icemaker emitter, 2255114 ice maker emitter board,2255114 sensor board,AP5956767 whirlpool,W10193666 kenmore,w10290817 kitchen aid,w10757851 ice level control board kit,w10757851 optic sensor,w10757851 whirlpool,w10757851 kenmore,w10757851 sensor board..
• While this is NOT a genuine Whirlpool part, it is a direct replacement and it will fit and work like the factory part. Excellent quality, fast delivery, simple after-sales. We make every effort to provide customers with satisfactory service..
• NOTE: Any use of any brand name or model designation for this product is made solely for purposes of demonstrating compatibility. We provide carefree return, and 90 days money back guarrantee! Feel free to contact us by emails for solution i....

NTE Electronics MJ10012 Silicon NPN Power Darlington Transistor, 400V, 10 Amp

• High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
• Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 60 Vdc (Min) TIP120, TIP125.
• Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
• Monolithic Construction with Built-In Base-Emitter Shunt Resistors.

DLP LINK 144 Hz Ultra-Clear HD 2 PACK 3D Active Rechargeable Shutter Glasses for All 3D DLP Projectors - BenQ, Optoma, Dell, Mitsubishi, Samsung, Acer, Vivitek, NEC, Sharp, ViewSonic & Endless Others!

• [RF 3D Glasses] The active shutter 3D glasses use RF to transmit signals, works without emitter. Compared with traditional IR signal transmission, the RF signal connection is faster, and the continuity is more stable. Pack of 2, super saving!.
• [Compatible Devices] The RF 3D active shutter glasses suitable for most of RF 3D signal TVs and 3D projectors. Compatible 3D RF projector: EPSON, Sony, JVC, xiaomi2, Lenovo and other more.
• Compatible 3D HD TVs: Epson, Samsung, Sony, Panasonic, Sharp, Toshiba, Konka, TCL, Haier and more. Can replace these models of 3D glasses: TDG-BT500A, TDG-BT400A, SSG-5100GB, TY-ER3D4MU, AN3DG40 and more. [PLEASE NOTE: Device before 2012 is not compatible with this remote control.].
• [Easy to Use] Rechargeable design 3d RF glasses, with ON/OFF switch. Auto 5 seconds Stand by and 5 minutes Shut Off. Not throwaway 3D glasses. High definition, no ghosting images, no flickering, clearer and more stable than IR signal connection. Providing you a superior 3D visual experience!.
• [Quickly Pairing] When pairing, please make sure that the distance between the 3D glasses and the 3D device is less than 19.5 inches/50 cm. Press the switch button, the green LED indicator will stay on for 3 seconds, the glasses are in the power-on state, then s....