ReviewsSignal Relay Modules

Flasher Relay 3 Pin Adjustable LED Flasher Relay LED Flasher Blinker Turn Signal Light Blinker Universal for 12V 24V Automobiles and Motorcycles

12V 24V Flasher Relay: This is a superfine quality LED flasher relay universal for 12V 24V automobiles and motorcycles.
Practical and Durable: The LED flasher blinker is helpful in solving problems related to turn signal LED light, such as rapid flashing, no flashing or....
Stable Performance: This LED flasher relay adopts advanced SMD technology, features short circuit automatic protection, overload automatic protection,....
Easy Installation: The turn signal light flasher with standard 3-PIN connector design, easy to install, plug and play.
Working Parameters: The size of this turn signal flasher is 5.3 x 3 x 2.6cm / 2.1 x 1.2 x 1 inches, and its applicable power is 0.1-150W.

Check Stock

ELECTRONICS-SALON DPDT Signal Relay Module, 12Vdc, RY12W-K Relay. Has Assembled.

This item has been assembled, and electrical test passed..
Size: 50 x 34.9 x 16 mm (approximately 2" x 1.37" x 0.64"), PCB thickness: 1.6mm..
high quality signal relay, FR-4 Fiber glass PCB, darlington transistor driving relay, LED indicator for relay action..
Relay Contact Material: Gold Overlay Silver-Palladium..

Check Stock

AOICRIE 12V 16-Channel Relay Interface Board Module Optocoupler LED LM2576 Power for Arduino DIY Kit PiC ARM AVR

★12V 16-Channel Relay interface board, and each one needs 15-20mA Driver Current.
★Equipped with high-current relay, AC250V 10A.
★The control signal voltage range: the trigger signal is low 0-2V.
★Standard interface that can be controlled directly by microcontroller (for Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP433, TTL logic).
★DC 12V 16 Channel Relay Module Interface Board With Optocoupler Protection LM2576 Power for Arduino DIY Kit.

Check Stock

12 Volt Timer Relay, DROK 0.1s to 999min 50mA 4-Mode On-Off Automotive Digital Delay Relay, Electric Delay Timer Switch, Cycle Time Delay Module with LED Display

4 MODE TIME DELAY RELAY: DROK 12V relay is provided with 4 different settings and supports various triggering signal source, like positive side of power supply triggering, Button, PNP sensor, PLC signal, which is available for most of applications..
WIDE ADJUSTABLE TIMING RANGE: This off delay relay supports widest timing range, 0.1 seconds to 999 minutes adjustable, which can fulfilled your various need..
STRONG ANTI-INTERFERENCE ABILITY: The output of digital timer relay adopts optocoupler isolation, which enhances the capacity of resisting disturbance power consumption..
SUPER SIMPLE OPERATION: Our relay board is operated by buttons and the delay module is equipped with LED digital display which is convenient for you to check the set value..
AUTOMATIC SAVING FUNCTION: After you finish the setting, you can cut off the power and then the parameters will be saved automatically, handy and convenient..

Check Stock

4 Pcs 12V 2 Pin Electronic Turn Signal Flasher Relay LED Flasher Relay Speed Adjustable Fix for Motorcycle LED Turn Signal Indicator Flasher Relay Orange

Product Specifications: the flasher relay for LED turn signal is designed with 2 pins, with nice workmanship.
Operating voltage is 12V, switch power....
Easy to Install: the turn signal relay is plug and play, convenient to install, saving your time and effort.
Please correct the pin position during....
Adjustable Speed: you can adjust the flashing frequency of the LED flasher relay to achieve the speed you want, the clockwise direction means slow,....
Wide Applications: the 2 pin electronic LED flasher relay is suitable for most motorcycles and bikes, to solve the problem of abnormal function of LED....
Enough to Use: you will receive 4 pieces of electronic LED flasher relays for motorcycle, abundant in quantity, enough for you to use or replace,....

Check Stock

NOYITO 2-Channel 5V Computer USB Control Switch Relay Module Drive-free relay module Plug and Play Suitable for PC Smart Controller

The module uses HID technology, without any driver, plug and play. Support WIN7,10, XP 32-bit, 64-bit system, easy to use simple..
Onboard square USB interface, stable connection.
use of high-performance USB control chip.
use dedicated relay driver chip ULN2803, relay work more stable.
Power outlet and terminal, two access power mode convenient and flexible. After connecting the power, even if the computer shut down or USB from the computer pull out, the relay can also maintain the set state..
【NOTE: The 1-Channel 2-Channel module does not require an external power supply. 4-Channel 8-Channel modules require an external module power supply. 】PCB size: 56.5mm * 40.6mm, fixed hole size: 3mm, fixed hole center moment: 52.2mm * 36.6mm..

Check Stock

Electronics-Salon DIN Rail Mount 8 DPDT Signal Relay Interface Module. (Operating Voltage: DC 24V)

DIN Rail Mount 8 Channel DPDT Signal Relay Interface Module, DC 24V Version..
RYxxW-K high quality signal relays, LED indicator for each relay channel. Darlington transistors circuit driving relay, improve the reliability of action..
DIN rail mount carrier: High quality Taiwan DINKLE fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail. FR-4 fiber glass dual layers PCB..
Pitch 3.81mm / 0.15" screw terminal block, wire range 26-16AWG, strip length 5mm / 0.2", Metric M2 slotted screw..
Datasheet: https://images-na.ssl-images-amazon.com/images/I/A1vg1+5HA8L.pdf.

Check Stock

Hilitand AD22B04 12V Signal Decoder 4 Channel DTMF Tone Relay Phone Remote Control PLC

【12V】Working voltage is DC 12V, you can easily find suitable power for this relay..
【reverse polarity protection.】This signal decoder relay ahs reverse polarity protection which can extend the service life..
【8 modes】8 modes of operation: Non-locking (Momentary ), self-locking (Toggle), inter-locking(Latch), 5/20/60/120/250-second delay..
【default control】The default control command is 1/2/3/4. Example: Dial 1 to control relay 1, dial 2 to control relay 2, dial 3 to control relay 3, dial 4 to control relay 4.
control commands can be changed any 1-4 bits. (For more details, refer to "AD22B04_4 channel DTMF controller commands setting manual ")..
【operating current】Standby 11-13 MA, 1 relay "open" 44MA, 2 relays "Open" 77MA, 3 relays "Open" 110MA, 4 relays"open" 140MA..

Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..

Check Stock

Topping PRE90 Preamplifier Preamp Amplifier Pre-amp Ultra-High NFCA Modules RCA Balanced XLR Output for D90se D90 A90 EXT90 Audio DAC with Remote Control (Black)

...ch output. More easy operation with the remote controller..
► Selectable XLR / RCA output: The output of Pre90 could be config to “XLR only”, "RCA only" or "XLR + RCA ". Therefore, the amplified signal can be connected to two different amplifiers. Good combination with EXT90 D90..
►Ultra-high Performance NFCA modules: It provides excellent DC and AC performance. Ultra-low noise of 0.3uv is milesahead of the competition, giving an absurdly high dynamic range of 145db and no audible noise and darkest background..
►Ext90 could extend you more inputs: A standard Pre90 provide you 1 x RCA and 1 x XLR stereo inputs. But when it working with a Ext90, they could provide totally 2 x RCA and 4 x XLR stereo inputs. This is enough for multi source systems..
►Relay volume control: A large number of high quality Japanese small signal relayIsed fovolume control of Pre90. Brings the advantages of precise control remote control, longevity, and complete channel balanceIf the volume was set high while turn on or switch in, Pre90 will automatically reduced to a safe volume to avoid your speakers/headphones blown by sudden high volume..

Check Stock

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..

Check Stock