ReviewsSilicon Carbide Ceramic

MJR Tumblers Refill Grit Kit for 6 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 6 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 6 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 3 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 3 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

MJR Tumblers Refill Grit Kit for 3 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 3 ounces of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 3 ounces of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 1.5 ounces of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 1.5 ounces of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

Juvielich Bench Grinding Wheel Green Silicon Carbide Grinding Wheel 1.26 Arbor 0.98 Thickness 120 Grit for Surface Grinding

  • 【DIMENSION】- Green silicon carbide grinding wheel outer diameter 150mm/5.91",center hole 32mm/1.26", thickness about 25mm/0.98",120 Grit..
  • 【HIGH QUALITY MATERIAL】- Green silicon carbide grinding wheel is made of Green silicon carbide,with high hardness and toughness,wear-resistant,durable..
  • 【FEATURES】- Green silicon carbide grinding wheel,high hardness,high brittleness,sharp abrasive grains and good thermal conductivity.It is not easy burning to the cutter head and the workpiece..
  • 【APPLICATION】- Works exceptionally well on tools like drills,mills or disposable tips for burring,grinding,stock removal,blending,rust removal, cleaning and finishing..
  • 【EXPLANATION】- Newly installed or used wheels every other day should be idling for more than one minute before use. Note:Do not stand in front of the wheel..
Check Stock

MJR Tumblers Refill Grit Kit for 15 LB Rock Tumblers Silicon Carbide Aluminum Oxide Media Polish

  • 16 ounces (1 pound) of 60/90 Graded Silicon Carbide Grit (Step 1).
  • 16 ounces (1 pound) of 120/220 Graded Silicon Carbide Grit (Step 2).
  • 8 ounces (1/2 pound) of 500/600 Graded Silicon Carbide Grit (Step 3).
  • 8 ounces (1/2 pound) of 1200 Aluminum Oxide Polish (Step 4).
Check Stock

6 LBS Large Weight 4 Step Rock Tumbler Grit Set Tumbling Media Refill-Coarse / Medium Grit / Pre-Polished / Final Polish Works with Any Rock Tumbler Rock Polisher Stone Polisher

  • ★【4 Steps】Be Patient. There are 4 total cycles, 7 days each to have pretty rocks / gems. Step 1, 60 Coarse Silicon Carbide Grit. Step 2, 220 Medium Silicon Carbide Grit. Step 3, 500 Fine Silicone Carbide Grit. Step 4, 1200 Aluminum Oxide Grit. Just measure in the grit, add enough water to cover the stones, seal the barrel, and tumble. The only variable is how much of the product to use in your rock tumbler. We suggest 2 tbsp of grit per pound of stones, which is a good rule of thumb..
  • ★【Large Amount of Grit】This is a large amount of each size grit for the price. This kit comes with enough grit to complete approximately 16-20 lbs of rocks. This kit contains 2 lbs 60 Coarse Silicon Carbide Grit, 2 lbs 220 Medium Silicon Carbide Grit, 1 lb. 500 Fine Silicone Carbide Grit, 1 lb. 1200 Aluminum Oxide Final Polish Grit. COMPATIBLE WITH ALL BRAND TUMBLERS..
  • ★【Jars, Labels & a Scoop】Nice hard plastic jars with lids (as opposed to plastic bags). Bottle caps are very secure. Definitely they will not leak. Use the amount you need and set it back on the shelf for the next round. A scoop is included for the correct dose. No need to pour the material out, which possibly make a mess while doing so. They are neatly packaged and easy to read labels....
Check Stock

Sandpaper | 25 Sheets | Grit 800 | 9x11 | Waterproof Silicon Carbide Abrasive

  • Silicon Carbide – Strong sharp abrasive for fast sanding.
  • Waterproof – Resin over resin bond. Use wet or dry.
  • C-weight paper backing – strength flexibility balance.
  • Best sanding hard materials: metal, hardwood, glass, granite, ceramic, plastic, fibreglass, stainless steel, cooper, automotive body repair.
  • Woodworking: Widely used in combination with aluminium oxide abrasives.
Check Stock

Sandpaper | 50 Sheets | Grit 240 | 9x11 | Waterproof Silicon Carbide Abrasive

  • Silicon Carbide – Strong sharp abrasive for fast sanding.
  • Waterproof – Resin over resin bond. Use wet or dry.
  • C-weight paper backing – strength flexibility balance.
  • Best sanding hard materials: metal, hardwood, glass, granite, ceramic, plastic, fibreglass, stainless steel, cooper, automotive body repair.
  • Woodworking: Widely used in combination with aluminium oxide abrasives.
Check Stock

Savio WMS5000 - Water Master Solids 5,000 GPH Submersible Pump

  • Ceramic coated drive shaft. Precision manufactured motor with thermal overload protection and hardened wear resistance..
  • Triple silicon carbide mechanical seals. 18 month warranty. Handles up to 1" solid..
  • Dimensions: 16" x 6" x 6". Amps 7.6. Watts: 870. Volts: 115. Outlet: 1-1/2" (1-1/2" w/elbow)..
  • Hertz: 60. Maximum Flow: 5000 GPH. Optimal Operating Range: 2000 GPH - 4500 GPH. Maximum Head: 29'. Average Monthly Operating Cost: $71.70.
  • Oil-Less - Safe for environments with fish and plants.
Check Stock

Polly Plastics Rock Tumbler Tumbling Media Grit Kit & Plastic Filler Pellets

  • COMPLETE KIT - 4 Step grit pack and plastic filler for use in 15 lb. tumbler or five 3 lb. tumbles..
  • CONTAINS - 1 lb. 60/90 Coarse Silicon Carbide Grit, 1 lb. 180/220 Medium Silicon Carbide, Grit, ½ lb. 500 Fine Silicon Carbide, ½ lb. 1200 Aluminum Oxide Polish and 1 lb. of premium high-impact polypropylene plastic filler pellets. Protect and cushion fragile stones and reduce tumbling noise..
  • GRIT SOLD BY WEIGHT NEEDED FOR EACH STEP – Steps 1 & 2 are 1 lb. each and Steps 3 & 4 are ½ lb. each but all are sold in the same size jars for packaging consistency. The different weights, along with different densities, will mean that jars will not have equal amounts of fullness..
  • PREMIUM POLISHING MATERIALS, COMPATIBLE WITH ALL BRAND TUMBLERS - Proven to produce a beautiful polish. Made in the USA..
  • BEGINNER FRIENDLY - Complete, easy-to-follow instructions included. 100% satisfaction guarantee on all our products..
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

  • Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

RJ-Modini-Propane Melting Furnace Jewelry Casting Forge Metal Copper Gold Silver-6KG -HQ

  • Heavy-duty steel exterior heated up to 1800 °C / 3272 °F.
  • GRAPHITE CRUCIBLE Silicon carbide Graphite.
  • The propane furnace can be melted: 6 KG copper, 2.2 KG gold,1.8 KG aluminum, 2.2 KG silver.
  • Furnace interior is fully lined with ceramic wool.
Check Stock