ReviewsSingle Emitter Laser

NTE Electronics MJ10012 Silicon NPN Power Darlington Transistor, 400V, 10 Amp

  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 60 Vdc (Min) TIP120, TIP125.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • Monolithic Construction with Built-In Base-Emitter Shunt Resistors.
Check Stock

IR Emitter Remote Control Extender Cable, 4 Heads 3.5mm Plug Infrared Red Transmitter Blaster Blink Eye IR Extending Cable for IR Repeater/TV/DVD/Bluray Player/Xbox One (4 Heads, 10FT)

  • PASSES IR communication: used with an IR repeater kit to control a device.
  •  Remote control ability to stretch to any room in the house.
  •  Self-adhesive back allows the spotlights to be attached to the IR eye by a device.
  • Quad heads allow you to control over several pieces of devices with only one IR output.
  •  For use with IR extender extension system, Xbox One, IR connector blocks and home automation controller.
  • The mini stick-on emitter includes a 10 m cable between the emitter heads and the mini-plug.
  • Can you through the existing IR controller, control A / V components such as amplifier, cable box, HD DVR, stereo receiver, SAT TV receiver, CD player, DVD player, BluRay player or other components By IR signal.
Check Stock

Bridgold 20pcs TIP127 PNP BJT Transistors Darlington Bipolar Power Transistor 5A -100v 3Pins

  • Collector-Emitter Sustaining Voltage @ 100 mA VCEO(sus) = 100 Vdc (Min) TIP122, TIP127.
  • Low Collector-Emitter Saturation Voltage VCE(sat) = 2.0 Vdc (Max) @ IC= 3.0 Adc = 4.0 Vdc (Max) @ IC= 5.0 Adc.
  • High DC Current Gain - hFE = 2500 (typ) @ IC = 4.0 Adc.
  • Monolithic construction with built-in base-emitter shunt resistors.
Check Stock

WenkeDigi IR Infrared Repeater System kit, IR Repeater Extender, Max 100 Feet Efficient Receiver Range - IR Remote Control Hidden Devices -10 Feet IR Receiver Cable (Can Run 400 Feet by Your Cat5e)

  • This IR kit is a device that only passes on the infrared signal . It is used to control Four (4) IR devices out of sight that are kept in a closed cabinet or in anther room ( expandable up to 18, and 4 x single emitter provided in the package , Additional IR Emitters sold separately, One emitter one device ) . Strong Compatibly , It is compatible with almost all the IR electronic appliances like SKY STB and CISCO DVD player , SONY receivers ,Amplifier, Xbox, TV , Blu-ray player,etc with its wide frequency range 20 KHz to 60KHz ..
  • Mini Block Size , Dual Sensors Mini Bar IR receiver , One Sensor 38KHz , the Other 56KHz, with long effective remote control distance up to 100 FEET @38KHz and 23 FEET at 56KHz , High sensitivity, Real time transmission without any delay . It allows you to control your home theater with your existing IR remote controller. NOTE : NOT support RF and Bluetooth Remote Control ..
  • This IR Repeater system kit supplies with an ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet door for a clean, stylish look. It makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight ..
Check Stock

Bridgold 10pcs TIP102 102 Bipolar BJT Single NPN Darlington Transistor 100 V/8 A,3-Pin TO-220

  • High DC Current Gain − hFE = 2500 (Typ) @ IC = 4.0 Adc.
  • Collector−Emitter Sustaining Voltage − @ 30 mAdc VCEO(sus) = 100 Vdc (Min) − TIP102, TIP107.
  • Monolithic Construction with Built−in Base−Emitter Shunt Resistors.
  • Low Collector−Emitter Saturation Voltage − VCE(sat) = 2.0 Vdc (Max) @ IC = 3.0 Adc = 2.5 Vdc (Max) @ IC = 8.0 Adc.
  • We have undergone rigorous testing and stable performance.
Check Stock

SureFire Fury DFT 1500 Lumen Tactical Single-Output LED Flashlight Bundle with 4 Extra CR123A Batteries and Lightjunction Battery Case

  • Virtually indestructible LED emitter regulated to maximize light output and runtime.
  • Single high output level of 1,500 lumens on one 18650 lithium-ion rechargeable battery, strong enough to also serve as a searchlight.
  • Dual fuel light powered by either two 123A lithium batteries or a single 18650 lithium-ion rechargeable battery.
  • Press tailcap slightly for momentary-on, or fully press or click for constant-on.
  • Includes 4 extra Surefire CR123A batteries (One SF18650B Factory Installed) and Lightjunction battery box.
Check Stock

EasiBBQ Emitter Plates for Charbroil Grill 463242515, 463367016, 463242516, 466242515, 466242615, 463243016, 463367516, 466242516, 466242616, 463346017, Stainless Steel

  • Replacement for Charbroil Commercial Infrared 3 Burner 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616, 463346017, 463246018..
  • Package includes 3 pack Premium Stainless Steel Emitter Plates. Easy to install and replace..
  • Dimensions: 17" x 8-1/16" per emitter. Make sure you measure the size of your original part and compare with ours before you order..
  • There are many holes in the surface of the Emitter Plate, the heat from the burner tube can be distributed better through the entire grill..
  • Improved the grilling by reduces flare-ups. It brings more flavorful food at a time..
Check Stock

SZBJ IR Emitter Extender Cable Extension 3.2 Feet - Dual Head 3.5mm Infrared Red Transmitter Pure Copper Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 2 IR Emitter

  • Passes IR communication: Used with an IR Repeater kit or other electronics has emitter output to control a device.Adhesive backing allows the emitter....
  • 3.2 ft overall length of Infrared Emitter cable between the emitter heads and the mini-plug, extend remote control ability to any room any where in....
  • Control A/V component by the existing IR controller: such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD....
  • Easy to use : Sticks directly onto the AV equipment, and quad Heads allow you to control multiple pieces of equipment with only one IR output..
  • Plug into IR OUT port for use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers..
Check Stock

Cast Iron Grill Grate & Stainless Steel Emitter Plate Replacement Kit for Charbroil 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616,463346017,3PCS Set

  • The cast iron grill grates and stainless steel grill emitters plates set fit Charbroil Commercial Infrared 3 Burner 463242516, 463242515, 466242515, 466242615, 463243016, 463367516, 463367016, 466242516, 466242616, 463346017, 463246018 perfectly..
  • The non-stick grates are made from sturdy cast iron which can prolong grill life expectancy and cast iron grates sit well on the stainless steel grill emitter plates for your charbroil grill.
  • Great replacement for original Char-Broil Infrared grates/emitters!.
  • Easy to clean and easy to install!The holes are drilled on the other side of the flame diffusers, so you can just flip it over to be almost exactly like the factory diffuser. The diffuser will work fine flipped over..
  • Specification: Material:Emitters are made from stamped stainless steel.
  • Cooking grill grid grates are made from sturdy matte enamel cast iron.
  • Package includes: 3-pack grill emitter plates and 3-pack grates.
  • Note: Please compare our cooking grates & emitter plate set with your original parts and check your original size before purchasing to avoid buying mistakes..
Check Stock

EasiBBQ Stainless Steel Cooking Grid for Charbroil 463242715 463242716 463276016 466242715 466242815 Gas Grill 3 Pack

  • Compatible with Char-Broil Commercial TRU-Infrared 463242715, 463242716, 463276016, 466242715, 466242716, 466242815, 466242816 Gas Grill. Compatible....
  • Compatible with Char-Broil Original Part Number: CHRG533-0009-W1, G5330009W1, G533-0009-W1, CHRG533-0009-W1A, G533-0009-W1A..
  • Package includes 3-pack Premium Stainless Steel Emitter Plates. Easy to install and replace..
  • Dimensions: 17" x 9 7/8" per emitter. Make sure you measure the size of your original parts and compare with ours before you order..
  • There are many holes in the surface of the Emitter Plate, the heat from the burner tube can be distributed better through the entire grill..
Check Stock

CRONHAWK Green Laser Weapon Light Combo 420 Lumens Pistol Flashlight and Gun Light Sight with Picatinny Rail Mounted and GL Rails for Shotgun Airsoft Handgun Glock

  • High optical performance: Green emitter output is.
  • Great compatibility: Attach directly to gun with GL rail and all standard pictinny MIL-STD-1913 rails. It can be adjusted between 20-22mm with adjustable rail clamp, making it more compatible with other similar accessories rail. Only one bolt is needed to mount and release light in seconds..
  • Rechargeable: Conveniently recharge your light's 400 mAh rechargeable battery on the built-in charging port with the included charging cable. Can be charged through power banks and wall chargers. Fully-charged in approximately 2 hours. Green laser has 3 hours runtime, ledx light for 1.5 hours and both for 1 hour..
  • Wide application: Commonly used as a pistol flashlight ,compatible with wide range of tactical weapons & firearms e.g. lights for glock shotgun, airsoft rifle accessories and attachments, perfect for compact mini gun light for home defense, law enfocement, personal defense, security personnels and hunting..
  • Sturdy construction: The led light laser combo with disorienting strobe is made of aircraft grade aluminum and black hard anodizing coating, extremely durable, shock and water resistant for use in the rain. Compact and sleek design make it easily stored in most universal holsters..
Check Stock