ReviewsSingle Fiber Cable

SHARP LC-37D40U LOGIC BOARD CPWBX3333TPZY 3508

  • LC fiber keystone insert is compatible with Single Mode OS2, 9 microns or Multimode OM1, OM2, OM3, OM4 and 50 microns or 62.5 microns fiber patch....
  • LC fiber coupler joins two duplex multimode fiber patch cables with Low profile LC connectors.
  • Protective caps on the adapter prevent dirt from....
  • Duplex LC adapter with a flangeless design, phosphor bronze sleeve, and stainless steel retention clip accommodates zipcord fiber cables.
  • Sturdy snap-in construction of LC fiber feed-thru coupler keystone provides a secure connection.
  • Installation of female to female keystone insert....
  • Cost-effective 5-pack provides spare keystone jack inserts for last minute cable connections.
  • Re-usable keystone jack inserts with caps can be easily....
Check Stock

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

  • FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
  • Cleaving angle: 0.5-0.8 degrees with single fiber..
  • Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
  • Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
  • High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
  • Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..
Check Stock

LC to LC Fiber Patch Cable Single Mode Duplex - 3m (9.84ft) - 9/125um OS1 LSZH - Beyondtech PureOptics Cable Series

  • Beyondtech high-quality LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) – LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

Single Mode LC WDM Single Fiber Bi-Di Gigabit Media Converter - Built-in Fiber Module 20km 12.42 Miles - to UTP Cat5e Cat6 10/100/1000 RJ-45 - Auto Sensing Gigabit or Fast Ethernet Speed -1 Pair

  • AUTOMATICALLY adapts to 10 Mbit/s, 100 Mbit/s (Fast Ethernet) or 1000 Mbit/s (Gigabit) Speed And Extends Ethernet over Single Mode Single Fiber to up....
  • NO MORE Integration Hassles, simply plug in Ethernet cable to any Ethernet port, whatever speed it is! UPC (Blue) Type Fiber Patch-cords Supported.....
  • SUPPORTS Jumbo Frame & LLF feature - for increased end-to-end TCP performance - Configured on demand using Dip-Switches.
  • PLUG & PLAY - Simply plug in fiber optical port and UTP RJ-45 port, and it will work immediately.
  • WHAT YOU GET: 1 pair (2 units) media converters and FREE UTP Cat5e Patch Cable (1m - 39in) Comes In The Set With Every Unit! - Colors May Vary....
Check Stock

Fiber Patch Cable, VANDESAIL 10G Gigabit Fiber Optic Cables with LC to LC Multimode OM3 Duplex 50/125 OFNP (1M, OM3-5Pack)

  • Beyondtech Pre-terminated connectors on both ends LC to LC Fiber Patch Cable Single mode 9/125 OS1 fiber is specially designed for fast Ethernet, Fiber Channel, Gigabit Ethernet Speeds, data center, premises, educational, LAN, SAN, commercial, 10GBASE-L (1310 nm), 10GBASE-E (1550 nm), 1000BASE-LX (1300 nm) and Asynchronous Transfer Mode (ATM) applications. It supports video, data and voice services..
  • This fiber OS1 LC LC 1 Meter LSZH Fiber Patch Cord conforms with TIA/EIA 492AAAA and IEC60793-2-10 A1b standards and complies with RoHS specifications..
  • This SM singlemode fiber has an yellow color jacket with a 3.00mm diameter. OS1 cables have a 0.25 dB/km attenuation at 1550 nm and 0.35 dB/km at 1310 nm..
  • This LC to LC Single mode Duplex OS1 fiber patch cords operate at -20ºC to +70ºC and have a minimum installation bending radius of 5.0 cm and a minimum long term bending radius of 3 cm..
  • OS1 patch cords allow for connections between patching panels and network and server equipment. OS1 9/125 patch cords are commonly used in passive applications (GPON, FTTX and LANs) - LC duplex connectors are joined with a plastic clip, easy to remove in case you need to separate the connectors..
Check Stock

Mini 3G-SDI Video Extender with SDI Loop Output 1080P 3G-SDI Fiber Converter Extension of Distances Up to 20km Over Single-Mode Optical Transceiver with Tally or Reverse RS485

  • 3G-SDI Optical Transceiver supports 1-channel 3G/HD-SDI Video (audio embedded) & Tally or Reverse RS485 signal transmitted via fiber optical cable, and monitor the signal locally over a 3G/HD-SDI loop output.
  • HD Fiber Converters includes one transmitter and one receiver for 1080P 3G/HD-SDI signal, transmits video signals up to 20km over a single fiber optic cable.
  • Each channel includes 8-channel audio embedded, automatic cable equalization, used for all rate below 3.2 Gb/s (Belden 1694A).
  • Directly compatible with 3G/HD-SDI camera systems, support hot swap and hot plug.
  • Handle all Pathological patterns, fully digital non-compression broadcast level transmission.
Check Stock

FTTH Fiber Optical Cable Cold Connection Tool Kit 16 in 1 with FC-6S Fiber Cleaver Aluminum10KM Visual Fault Locator Cable Tester Stripper Tool Kevlar Scissors Equipment

  • Fiber Optic Cleaver FC-6S(Coating Diameter: 0.25- 0.9 (Single)).
  • Fiber cable Stripping CFS-2 Plier 250 coated fiber of 125 fiber.
  • visual fault locator,Universally connector for test different ST,SC,FC interfaces.
Check Stock

GloFX Cosmic Cable [PROGRAMMABLE LED Fiber Optic Light Cable] 6 Ft 360° Swivel 8 mm Diameter - Bright Light Up Rave Toy | EDM Flow Toy Light Painting

  • COSMIC CABLE Fiber Optic Space Whip. The #1 Best Selling Whip features a single fiber bundle to use for space whip and rope dart flow techniques,....
  • PROGRAMMABLE COLORS: Now Featuring 18 Animated Light Modes – Including 5 Rainbow Modes, 35 Vibrant Colors with 3 Brightness Settings, and a Low....
  • SUPER DURABLE & VERSITILE: 360 Degree Swivel Ball Bearing and Flexible Fiber Cable will withstand new flow techniques, light painting photoshoots, and....
  • PERFECT FOR DANCING: Great for Raves, Parties, Concerts, Flow Toys, Dance Accessories, Costumes, Light Shows, EDM Music Festivals, Light Painting and....
  • LIFETIME WARRANTY: Water Resistant, Durable, and Rave-Proof Powerhouse. Assembled in the USA and Covered Under the GloFX Lifetime Warranty [Plus....
Check Stock

StarTech.com Singlemode (SM) LC Fiber Media Converter for 1Gbe Network - 10km - Gigabit Ethernet - 1310nm - with SFP Transceiver (ET91000SM10)

  • ETHERNET OVER FIBER EXTENSION: Use this full / half duplex fiber media converter to convert and extend a Gigabit Ethernet connection up to 10km (6.2mi) using singlemode LC fiber cable..
  • INCLUDES SFP: For added convenience, this IT-grade network fiber media converter includes an SFP transceiver (mini gbic), enabling an 1310nm LC single mode Gigabit fiber connection..
  • MAXIMUM DURABILITY: Built to withstand harsh environments, this rugged media converter has a durable steel housing, and has an operating temperature range of 0°C-50°C (32°F-122°F)..
Check Stock

StarTech.com HDMI Over Fiber Extender (LC) - 4K 60Hz HDMI 2.0-3300ft (1km) Over Single Mode - 1000ft (300m) Over Multimode Fiber Optic Cable - Transmitter/Receiver AV Converter Kit (ST121HD20FXA)

  • HDMI OVER FIBER EXTENDER KIT: Extend an Ultra HD (UHD) 4K 60Hz HDMI 2.0 signal + 7.1 CH audio up to 3280ft (1km) over single mode or up to 985ft (300m) over multimode fiber cabling w/ an LC connector.
  • RELIABLE VIDEO TRANSMISSION: Fiber connection allows for uncompressed and uninterrupted video transmission & Electromagnetic interference (EMI) immunity and optical isolation for reliable signal integrity.
  • 3x Status LEDs for power/optical link/HDMI link.
  • SERIAL AND IR EXTENSION: Extend serial or IR signals over the fiber cable.
  • IR control extension kit includes 2x IR Receivers & 2x IR Blasters (IR remote not included).
  • RS-232 terminal block connectors for device or display control (up to 115.2Kbps).
  • EASY INSTALLATION: Point to Point connection between AV transmitter and receiver.
  • No IP configuration/drivers/network equipment required.
  • Durable steel housing w/ built-in mounting hardware for a tidy installation.
Check Stock

Fujikura FSM-70S Fusion Splicer Welding Splicer with CT-30 or CT50 Cleaver and Other Standard Accessories Multi Language

  • Package Accessories: FSM-70S fusion splicer Battery BTR-09 Battery Charge Cord, DCC-18 Fujikura Fiber Cleaver, CT-30 AC Adapter, ADC-18 AC Cord,....
  • Splices all known types of fibers. Fiber core alignment. Typical average splice loss for single mode cable with G.652D fiber is only 0.02 dB. Reduced....
  • Multi language, include 17 kinds language.
  • Reduced splicing time – 7 seconds only..
Check Stock