ReviewsSingle Sided Pcb

Lanzar Amplifier Car Audio, 2 Channel, 2,000 Watt, 2 Ohm, Bridgeable 4 Ohms, MOSFET, RCA Input, Low Pass Filter, High Pass Filter, Bass Boost, Amplifier for Car Speakers, Car Electronics (OPTI500X2)

  • AUDIO EVOLUTION: The Lanzar car speakers amp features regulated Pulse Width Modulated MOSFET power supply that maintains rated power over a wide range of battery voltage..
  • SOUND SPECIALIZATION: This high-powered amplifier monoblock is cutting edge technology at its finest. Gold-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and speakers that allow distortion-free sound..
  • INTELLIGENT DESIGN: The class amplifier features include a double-sided epoxy PCB circuit board, soft turn-on/off.
  • as well as an electronic crossover network, and low and high pass filter controls..
  • FULL SOUND: This car amp is equipped with single-channel class-D amplifiers for greater power efficiency, meaning you'll get a bigger sound with less power..
  • ADDITIONAL FEATURES: The competition amplifier includes added optimal features such as power and protection LED indicators, subwoofer remove level control, gold plated RCA inputs, and bridgeable at 4 Ohms..
Check Stock

YaeCCC 110V Ultrasonic Cleaner Power Driver Board with 2PCS 50W 40K Transducers

  • -The ultrasonic generator can monitor the power system frequency ultrasound power..
  • -According to different requirements of users, real-time adjustment of various parameters: The power, amplitude, and running time..
Check Stock

Patriot Signature 4 GB PC3-10600 (1333 MHz) DDR3 Desktop Memory PSD34G13332

  • Non-ECC Unbuffered 240-Pin 2 Rank Double-sided in-line memory module.
  • PCB height: 1181(mil) and 1.5V Power Requirement.
  • 100% Tested, RoHS Compliant, JEDEC Compliant.
Check Stock

FormulaMod 120mm ARGB High Performance with Low Noise Water Cooling Case Fan CPU Fan Radiator Fan FM-FANYH01

  • High wind pressure and high air volume design for optimal cooling performance in water cooling systems.
  • 11 large-size fan blades rotate smoothly, up to 68.65 CFM air volume.
  • Four-sided double-sided anti-vibration rubber pad, effectively reducing noise during fan operation.
  • The motor PCB integrates 6 luminous 5V full-color lamp beads, which can be adjusted by light and synchronized by external controller..
  • After-sales service: If you purchase our company’s products, the warranty period is half a year, and we provide technical support. If you encounter any problems when using our products, please feel free to contact us..
Check Stock

LANTRO JS 5pcs EMC EMI Near Field Probe Set, Near Field Magnetic Field Probe, Anti Interference RF Explorer SMA Conductive Radiation Test Antenna Kit, SMA Male Thread

  • Product Material----PCB adopts 1.6mm thick double‑sided board, 1.5 oz copper thickness, and the whole process of spraying tin to make sure good passing performance of large and small currents..
  • Fully Shielded Magnetic Field Probe----Greatly suppresses electromagnetic clutter interference in the external environment, improves the dynamic range of the entire system, and helps to improve the accuracy of position detection..
  • Function----Phase noise and spectrum components can be combined with a low‑noise preamplifier for measurement. It can help you find and identify potential sources of interference within the components of electronic components..
  • 5PCS Probes---- There are 5pcs probes, can meet your use and replacement needs, convenient and practical. Small size, with case, easy to carry and store..
  • Note----When using, the PCB board should not be touched by hands ,Vertical use at frequencies exceeding 2 GHz..
Check Stock

Optical Laser Lens Head for Game Cube NGC Gamecube Replacement Repair Parts

  • Best ChoiceGreat replacement for your broken or defective DVD drive.Compatible with Nintendo Wii models.
  • Compatible WithComplete Unlocked D2A D2B D2C D2E DVD Drive For Original NINTENDO WII With PCB Board Already Installed (2 PCB Board)..
  • Plug-and-Play UnitHigh Quality DVD Drive Replacement Repair Part for Nintendo Wii . Please note:It can load DVD game ONLY. (cannot read DVD movies)..
  • Easy to InstallSuper easy to install, even kids can single install.Try-Wing Screwdriver Is Required To Open Up a Console..
  • Buy it Risk-FreeComes with 24 months quality warranty and 30 days money back.We will do everything we can to ensure you are COMPLETELY satisfied with your purchase. Refunds , exchanges and all. You are Guaranteed to be happy. If you meet any issues, please let us know. We are always available to help you..
Check Stock

Alla Lighting NCP CANBus HIR2 9012 LED Headlights Bulbs, Dual High Beam and Low Beam Headlights Conversion Kits PX22d Base 9012LL CANBUS Replacement, 6000K~6500K Xenon White

  • (Sold by pair) HIR2 9012 LED CANBus error free headlights bulbs, plug-n-play for most vehicles, easy installation. High Illumination light output: up to 5000 lumens per 9012 LED headlight bulb, total 10000lms for 2pcs 9012 LED headlights bulbs..
  • Advanced heat sink: adopted dual-sided copper PCB for rapid heat transferring, equipped with fast speed fan, built-in double premium cooper pipe, aviation 6063 aluminum for the best heat dissipation..
  • Adjustable beam pattern: the best light beam pattern is to make sure the LED chips face left and right, 3 and 9 o'clock, if not, then please remove the chuck and adjust the angles to achieve the best beam pattern for high beam or low beam..
  • Working Power: 50W/LED headlight bulb, single beam pattern. Cross reference number: HIR2, 9012, HIR2/9012, 9012LL, etc.
  • Application: Used to upgrade OEM halogen, HID or damaged dual high beam and low beam headlights..
  • USA located in Chino, CA USA, Professional technicial support and best customer support. Fully one year warranty guaranteed, hassle free return..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 80mmx120mm, Green Pack of 4

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 80mm x 120mm / 3.15 x 4.72 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

MECCANIXITY PCB Board Double Sided Printed Circuit Prototyping Boards Plated Through Holes for DIY Soldering Electronic Projects, 20mmx80mm, Black Pack of 5

  • These PCB boards are great for assembly of a point to point style electronics board. Suitable for countless small electronics projects such as building a robot. If you are working with hobby electronics and want a more permanent circuit solution but don't want to design your own PCB, these are great for you!.
  • The prototyping boards we provide here are in the size of: Dimension: 20mm x 80mm / 0.79 x 3.15 inch (W*L).
  • They are made of FR-4 glass fiber, double sided with tinned through holes. This is a fast easy way to build small projects, the boards are durable and the tinned holes can take heat without lifting off..
  • Easy to cut with a rotary tool. The pre-drilled holes in each corner are great for building with two layers..
  • Please read the measurements before ordering if you are concerned about the size..
Check Stock

Patriot Signature 8GB DIMM DDR3 CL11 PC3-12800 (1600MHz) PSD38G16002

  • 7.8US Refresh Interval (8192 CYCLES/64MS).
Check Stock

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

  • This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
  • The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
  • Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
  • Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
  • Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..
Check Stock