ReviewsSingle Wire Lock Pin

Gate Keeper Multiple Lock System

The Bulldog Pedestrian Gate Lock secures walk-through gates in a locked position. The Bulldog lock is mounted horizontally, and it locks the swinging pedestrian gate to a post or column.
Includes Gate Lock, Keypad, Push Button Control, 2 Keys for Manual Release, Lock Receiver w/ Clevis Pin and 4 AA Batteries. Lock also includes 20’ of 16 Gauge Low Voltage Wire.
Compatible with a variety of Mighty Mule access controls, including the Mighty Mule Wireless Gate Entry Intercom/Keypad System (FM136).
Solar Compatible with Mighty Mule Solar Panels including the 5 Watt Solar Panel Kit (FM121) or 10 Watt Solar Panel Kit (FM123).
Backed by a 12 month Might Mule Warrant and Technical Support.

Check Stock

MENKEY Terminal Removal Tool Kit for Car, 39 Pieces Wire Connector Pin Release Key Extractor Tools Set for Most Connector Terminal

Package Include- This pin removal tool kit includes 12Pcs Single Pin Extractor, 20Pcs Double Pin Extractor, 1Pcs Three Pin Extractor, 6Pcs Casing Tool.
High Quality - The depinning tools are made of premium quality steel and plastic, strong and durable, would not easily get out of shape, can be used repeatedly. The O ring handle make it more safe to operate the terminal pins connectors.
Easy to Use - No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage.
Wide Application -The electrical pin removal tool kit includes 39 Pcs different types car plug terminal extraction repair tools, can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal (such as cars ,wiring harness and household appliances).
Convenient - This set of electric pin remover tool is light weight and compact shape, coming with 3 pieces of stainless steel beaded ball chain, easy to use and carry.

Check Stock

HiLetgo 120pcs/3x40pcs Breadboard Jumper Wires Prototype Board Dupont Wire Male to Male Male to Female Female to Female 2.54mm to 2.54mm 20CM Wires Assortment Kit for Arduino Raspberry PI DIY

0.127mm, 36 AWG/ single root, 20cm(7.87inch)/axis.
The cables can be separated to form an assembly containing the number of wires you require for your connection and to support non-standard odd-spaced....
Including 40 pin male to female jumper wires,40 pin male to male jumper wires, 40 pin female to female jumper wires..
10 different colors, 120units copper cable in total, for making prototypes with arduino boards, stepper motor 3D printer etc, The combinations provide....
Factory directly, 10 tiny copper wires inside of single jumper wire: high-level copper wire inside, durable for conductive connection..

Check Stock

JacobsParts PCI Express Power Splitter Cable 8-pin to 2x 6+2-pin (6-pin/8-pin) 18 AWG (5-Pack)

Connect any graphics card to a single 8-pin PCI Express power connector..
Connectors: 8-pin PCIe Female, 2x 6+2-pin PCIe Male.

Check Stock

USA Flag Co. Flag Pole Free-Spin Anti-Wrap Residential or Commercial 6ft Outdoor Flagpole (Classic Black)

QUALITY - No Rust Pin-Lock Telescoping flag pole (11 gauge aluminum!) Compare our 11 Gauge poles to our competitors thinner 16 Gauge.
FINISH - 25' Black Electroless Plated Finish Telescopic Flagpole - Increases corrosion protection, Provides greater wear resistance and enhances appearance - Includes "Honoring Those that have Served" Plaque.
BOX INCLUDES - Gold Ball Flagpole Topper 3'x5' Printed USA Flag All Hardware Required to Fly two Flags!.
WIND TESTED - 100+ Sustained MPH Wind rated with a single flag.
PIN LOCK DESIGN - 25' 2 7/8" Diameter Secure-Lock Plus Design.

Check Stock

Maerd Terminal Removal Tool Kit, 76Pcs Terminal Ejector Kit for Car, Pin Extractor Tool Set Release Electrical Wire Connector Puller Repair Key Removal Tools

【Portable Safety Protective Bag】This set of tools is sharp and can be placed in a protective box for easy carry and prevent children play as toys.
【Package Include】 76Pcs pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 18Pcs Casing Tool.
【High Quality】The terminal extractor tool is made of premium quality stainless steel and plastic, not easily get out of shape, can be long term use. The pin removal tool has different sizes fit any terminal.
【Easy to Use】 The electric pin remover tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage.The O ring handle make it more safe to operate the terminal pins connectors.
【Wide Application 】This set of electric pin remover tool is light weight and compact shape, Split into multiple portable sets, which can be used in different places, The wire extraction tool is perfect for cars, motorcycles, household appliances and other electronic devices.

Check Stock

16AWG GPU VGA 8 Pin PCIE Splitter to Dual 8 Pin(6+2) Power Adapter Cable,Pci Express Graphics Card GPU 8Pin Extension Power Sleeved Cable 9inch 6 Pack

...ed copper wire, and the thicker core has lower resistance. Even if your graphics card is running at full load, our 8 pin to dual 8 pin pcie cable can safely provide power to the graphics card, and will not heat up and become soft..
【upgrade】Does your GPU exceed the capacity of the pcie power cable? want to use a single 8 pin pcie cable to drive the GPU in a low to medium wattage power supply? This is very simple. Only need to replace 18awg 8 pin pcie cable with 16awg. After repeated calculations, the peak value of the 18awg pcie 8 pin cable is about 23a, and the peak value of the 16awg 8pin pcie splitter is about 33a. Even if your GPU reaches 400w power consumption, our GPU power cable The lines can be easily adapted..
【Durable】This 8pin pcie power cable uses standard UL1007 16awg copper wire, plus braided net protection, the product length is 9 inches, 100% brand new tinned copper core，Compatible with common non-modular psu and semi-modular psu.
（NOTE:This 8 pin to dual 8 pin pcie cable is not suitable for fully modular power supplies）.

Check Stock

Fms Ravenox Heavy Duty Barreloc Cord Lock | Cord Locks for Drawstrings, Rope | Clamp Toggle Stop Slider for Paracord, Bungee Cord, Accessory Cordage, Drawstrings and More (Black)(6 Pack)

...E CORD ENDS DURABILITY: Designed for the toughest environments including salt water, dirt, mud, indoor or outdoor use. Excellent addition to outdoor essential as these double hole cylinder barrel cord locks perform well in extreme temperatures – hot or cold. Each toggle stopper measures 13.46 mm x 29.71 mm (W*H). Single hole that accommodates two pieces of cord that power holds a ¼-inch cord or two pieces of 4 mm/ 0.157-inch rope..
ACCESSORY CORD AND STOPPER USES: Perfect for indoor use including gloves, jackets, storage, securing luggage, tie down straps, securing tools, and creating shock cord end webbing. It is also perfect to use outdoors with boating, kayaking, camp, traveling, hunting, and tactical gear..
BARREL LOCKS AVAILABILITY: In black with a range of packs from 6-packs, 10-packs, 25-packs, 50-packs, 500-packs, and 1,000-packs. Ravenox also has cord locks such as the toaster ellipse, standard, double hole kettle drum, SurMount CL, Micro, Bowling Pin, Square Block Cube, Dual Circle, Turtle, Oval, Wheeled, Round Bubble Ball, Dual Hole Detachable, Dual Hole Bow, Single Hole Bow, CSL, Sliploc, Extra Large, Cylinder and Miniloc..

Check Stock

IQ Bowsights Pro Hunter RH - New for 2021 Multicolor IQ00359

NEW & IMPROVED - With 50% thinner improved bladed pin construction, the IQ Pro Hunter just got better. An enhanced fiber optic containment continues....
GREATER VERSATILITY - The IQ Pro Hunter features two slimmer fixed pins for shots at shorter distances and a third slimmer "floater" pin that can be....
OPTIMUM PERFORMANCE - The 3-pin, all-aluminum sight offers top-end performance and precision adjustments that comes standard with IQ’s patented....
PATENTED TECHNOLOGY – IQ’s exclusive Retina Lock alignment and rapid-drive pin adjustment mark the sights features while a single pin rapid....
ULTIMATE PRECISION - Tool-free micro-adjust windage and elevation knobs and dials with an angled mounting bar offer multiple bow and quiver attachment....

Check Stock

Roadmaster 520 Falcon 2 Tow Bar - 6000 Pound Capacity

8,000 pound weight capacity motorhome mounted tow bar using a 2" receiver.
One person can easily connect or disconnect the Sterling All-Terrain in seconds.
Telescoping, independently-adjustable inner arms are easy to maneuver into position. Simply pin them in place and then drive your motorhome away and the arms automatically center and lock in place.
Solid stainless steel inner arms for smooth, trouble-free operation and easy maintenance.
Weighs 35 pounds and includes safety cables and a 6-wire power cord with one wire plug and one 7-wire plug. Crossbar not included.

Check Stock

Tens Lead Wires 3.5mm Plug to 2 2mm Pin Connectors 2 Discount Tens

Bifurcating Lead Wire Splitters allow you to double the pads used off each TENS lead wire or EMS lead wire..
Standard connector size of 2mm will fit most TENS machine electrodes and lead wires. Will also work with EMS Muscle Stimulators..
Easy to use – just attach splitter to your machine lead wire, then plug pins into electrodes..
Converts a single lead wire pin into 2 pins. This pair will convert 2 lead wire pins into 4 pins..
Sold in pairs – 1x Red and 1x Black in a pair. Each Splitter is 9 inches long..

Check Stock