ReviewsSingle acting Hydraulic Cylinders

20 ton Ultra-Thin Hydraulic Lifting Cylinders 20 Ton Stroke 0.52\ Hydraulic Cylinder Industrial Lifting Jack Ram Low Height

*Low height:20 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 13 mm（0.52"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit..
*Stopping ring: protect the cylinder when the stroke get to top, absorbing heaviness from the other side.
*Plated steel plungers:hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
*Single-acting spring return: provides fast and complete retraction.
* Corrosion resistance:hard chrome plated high quality steel plungers and cylinder wall for increased corrosion resistance.

Check Stock

Maxim TC Double Acting Hydraulic Tie Rod Cylinder - 2 Bore Hydraulic Cylinder - Tie-Rod Cylinder for Double Acting Applications - 2” Bore, 6” Stroke, 2500 PSI, 16.25'' Retracted - 3/8 NPT Ports

SPECIFICATIONS: Maxim’s hydraulic cylinders has a 2” bore with 1” pin, 1.125” rod with a maximum stroke length of 6,” 3/8 " NPT Ports with 2500 PSI and column load of 7850 lbs. It measures 16.25” when retracted and 22.25” when fully extended..
HEAVY-DUTY: With a maximum working pressure of 2500 PSI and column load capacity of 7850 lbs, this tie-rod cylinder for double acting applications is made for rugged agricultural applications that require reliable and consistent performance..
EASY TO USE: Our double acting hydraulic cylinder has a simple but compact design that can be easily installed and disassembled. These tie-rod hydraulic cylinders are manufactured per strict NFPA standards and are interchangeable..
VERSATILE: This double action hydraulic cylinder is adaptable - it comes in customizable bore sizes from 2” to 4” and stroke lengths from 4” to 48”. Although made for rugged agricultural use, the tie-rod cylinder can be used in exacting applications..
LONG LASTING: Made from top-grade ductile iron with hard-polished chrome plating, this 6 stroke hydraulic cylinder is equipped with Buna N O-ring and zinc seals. It is durable and not susceptible to damage from wear and tear..

Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..

Check Stock

Hydraulic Valve 2 Spool, Hydraulic Directional Control Valve, 11GPM Hydraulic Joystick Control Valve for Tractors Loaders, Double Acting Cylinder Spool

Hydraulic directional control valve comes with 2 spool and #8 BSPP in/out ports, and the 2 spool hydraulic joystick fits for small tractors, tractors loaders, log splitters, and so on..
Hydraulic control valve 2 spool for operating double acting cylinders. Durable cast iron construction provides long-term usage..
The hydraulic valve 2 spool, hydraulic control valve for tractor loader, all spools standard come with spring return, which can return to the neutral position..
The hydraulic spool control valve's relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM. The hydraulic valve 2 spool replacement for hydraulic control valve 2 spool, hydraulic directional control valve, hydraulic spool control valve, joystick hydraulic valve, 2 spool hydraulic joystick, hydraulic control valve for tractor loader, hydraulic joystick control, hydraulic loader valve joystick, hydraulic loader control valve joystick..
You will get 1pcs 2 spool hydraulic control valve. We provide the best after-sales service, if you have any questions, please feel free to contact us, we are happy to serve you..

Check Stock

Hydraulic Multiplier 2 Circuit Kit,SCV Splitter/Diverter Manifold Valve Kit with Couplers and Switch Box Control, Turn 1 Circuit into 2 Circuits, for John Deere, for Case,for Kubota,for Ford

This solenoid operated valve multiplies your existing Hydraulic Outlets and allows you to control 2 circuits from the lever in your cab. It works on all ISO Hydraulic Systems and is easily transferable to multiple units.Save money versus expensive factory add-ons!.
Allows tractor float operation on selected circuits.Works with Double or Single Acting Cylinders.Can be used on Open, Closed or FPC hydraulic systems.Capacity for up to 20 GPM Hydraulic Flow & 3000 PSI Hydraulic Systems.12 Volt DC is required to operate the Electric Solenoids. 24 Volt coils are also available..
Heavy duty chemical and weatherproof Solenoid Valves.Anodized body provides long lasting protection from corrosion..
This kit comes with Custom Eccentric Fittings which will allow you to plug the valve directly into your tractors outlet. Since there is no standard for female ports on tractors, the fittings adjust to accommodate center to center dimensions as narrow as 2″ and as wide as 2-1/2″.The kit can also be mounted in a remote location on your tractor or implement by running two hydraulic lines from your unit to the multiplier valve..

Check Stock

Hydraulic Adjustable Variable Flow Control Valve, 0-30 GPM, 3/4” NPT Port Size

SPECIFICATIONS: Chief’s front end loader control valve has 1 spool, 3 position spring-center with 4th position float detent, a 25 GPM flow rate, and 3000 PSI maximum working pressure. It has 1/2" NPT work, 3/4" NPT inlet/outlet port, and weighs 16 lb..
VERSATILE: The RLD Series 1 spool 4 way directional control valves can be used to forward, retract, or hold the position in double-acting hydraulic cylinders. Their versatility means these hydraulic valves can be used in most hydraulic circuits..
ROBUST: Our hydraulic control valve 1 spool has a precision machined construction and is extremely sturdy. Dynamic and high performing, the control valve operates easily at pressures as high as 3000 PSI and can be actuated in multiple ways..
ENERGY EFFICIENT: Equipped with a float detent, this hydraulic valve 1 spool, allows the hydraulic fluid to pass over the center of the valve to the other port. These valves are energy and effort efficient..
HIGH UTILITY: This loader valve control can effortlessly shift into three positions per requirement. Our hydraulic directional control valves offer enhanced directional control of actuators, even in cramped spaces, and prevent excess heat build-up..

Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..

Check Stock

Mophorn Hydraulic Pump 4 Quart Hydraulic Power Unit Double Acting Hydraulic Pump Unit with Steel Oil Tank 12V DC Hydraulic Pump for Dump Trailer Car Lifting (Steel,Double Acting)

Displacement of Hydraulic Pump: 0.825 GPM .Relief Valve Pressure: 22 MPA ( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port ).
Single Acting Power-Up/Power-Down. Hand Held Pendant With About 15 Foot ( 4.5m) Removal Cord And Start Solenoid.
Application: This Hydraulic Power Unit Is Suitable For Control Of A Set Of Single-Acting Cylinder. Widely Used In Small Dump Truck, Hydraulic Winch, Etc..
Notice: A New Electronic Instruction Will Send To You Through Your E-mail Coming With The Order. Pls Feel Free To Contact Us When You Have Problems On Installation About That..

Check Stock

3 Wire Dump Trailer Remote Control Switch for 12V DC Single Acting Hydraulic Pump Power Supply Unit Dump Trailer Fit for Lift Unloading

[Feature] 3 wire single acting hydraulic power unit 12V DC, small area, use widely, easy to carry..
[Wide Use] Fits most single-acting hydraulic pumps power units..
[Reasonable Design] 2-button pendant control is most commonly used as a dump trailer remote, which is built of a high-impact, highly visible plastic....
[Wire Connection] For 3 wires (single -acting) dump trailer control: Use wire with round metal head connect to lower valve. Use wire with circle....
[Package Include] Comes with Mounting Holster +Magnetic Back + 3 Wires--Red (power) ,Black(down) ,Blue(start). Notice: If you have any problems,pls....

Check Stock

Mophorn 3 Spool Hydraulic Control Valve 11GPM Hydraulic Directional Control Valve Double Acting Hydraulic Valve for Tractors Loaders Tanks

Double Acting: Hydraulic control valve for operating double acting cylinders..
Durable Quality: Come with 3 spools and #8 SAE O-ring in/out ports, with cast iron construction for long-time use..
High-efficiency: The relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM..
Spring Return: All spools standard come with spring return, which can return to the neutral position..
Widely Used: Fit for small tractors, tractors loaders, log splitters, and etc..

Check Stock

Mophorn Hydraulic Valve 2 Spool Hydraulic Directional Control Valve 11gpm Hydraulic Control Valve Double Acting for Tractors Loaders Tanks

Durable Quality: Come with 2 spool and #8 SAE O-ring in/out ports, with cast iron construction for long-time use..
Double Acting: Hydraulic control valve for operating double acting cylinders..
Spring Return: All spools standard come with spring return, which can return to the neutral position..
High-Efficiency: The relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM..
Widely Used: Fit for small tractors, tractors loaders, log splitters, and etc..

Check Stock