ReviewsSingle phase Generators

Leviton 51120-1 120/240 Volt Panel Protector 4-Mode Protection Light Commercial/Residential Grade In NEMA 1 Enclosure

  • 120/240V Single Phase Panel Mount Surge Protective Device, 4-Mode Protection, 50kA Max Surge Current Rating, NEMA 1 Enclosure, UL 1449 4th Edition....
  • Type 2 Single Phase Surge Panel with 4-Mode Protection.
  • Real-time diagnostic visual indicator shows power and suppression status for each protected phase.
  • Standard J-Box enclosure with pre-punched standard knock-outs can be easily surface mounted in typical frame construction.
  • Features a low VPR to ensure protection of sensitive electronic devices including LCD TVs and computers.
Check Stock

Grizzly Industrial G0449-37\ 10 HP Drum Sander

  • Sanding drum motor: 10 HP, 240V, single-phase, TEFC, 1725 RPM.
Check Stock

Grizzly G9933 Three Spindle Shaper

  • Motor size: 3 H.P. TEFC Single Phase 220V.
  • Working size of table: 15-Inch x 32-Inch.
Check Stock

PACKARD 3.3 Inch Diameter Vent Fan Motor Direct Replacement For Nutone / Broan

  • Shaded pole, 120 Volts, .95 Amps, 1/50 HP, 60 Hertz,.
  • Automatic overload - Motor Rotation Counter Clockwise - CCWSE.
  • 60 Hertz, SIngle Phase, 1550 RPM, 1 Speed.
  • Single phase - Shaft Dimensions ¼” X 1”.
Check Stock

Grizzly Industrial G0791-12" X 36" Combination Gunsmithing Lathe/Mill

  • Lathe motor: 2 HP, 220V, single-phase, 8.5A.
  • Mill motor: 3/4 HP, 220V, single-phase, 4.5A.
Check Stock

Testing Meter Handheld Megohmmeter Resistance Tester Auto Range Data Logger Insulation Tester for Industry for Indoor Outdoor for Electrician

  • It is an ideal test instrument for measuring insulation resistance of transformers, transformers, generators, high voltage motors, power capacitors, power cables, lightning arresters, etc.
  • LCD display 1999 digits count, over limit indication.
  • PI polarization index and DAR insulation absorption ratio measurement, automatic calculation of resistance ratio.
  • Mainly used to check the insulation resistance of electrical equipment, household appliances or electrical lines to the ground and phase to ensure that these equipment, electrical appliances and lines work in a normal state, to avoid accidents such as electric shock, injury and equipment damage..
Check Stock

Grizzly Industrial G0958-8" Combo Planer/Jointer with Helical Cutterhead

  • Motor: 1.5 HP, 120V/240V, single-phase, 15A/7.5A, prewired 110V.
Check Stock

GOULDS Water Technology 10GBC10 High Pressure Multi Stage Booster Pump, 1 hp, Cast Iron, 1 Phase, Open Drip Proof Motor, 60 Hz, 115-230V, 10 Stage

  • Multi-stage Design: Provides steady, quiet, vibration free, operation.
  • O-Ring Casing Seal: Reliable high pressure sealing with easy disassembly for maintenance or repair.
  • Motors: Close coupled NEMA 56J motors in open drip proof or totally enclosed design. Single phase and three phase available.
  • Single phase motors have built-in capacitor and overload with automatic reset.
Check Stock

Superior Electric SW56 Large Table Saw Push Button Switch for Table Saws 35A/20A -120V/230V

  • Voltage/ amperage: 120 volts - 35 amp - 2 HP - single phase.
  • Voltage/ amperage: 230 volts - 20 amp - 3 HP - single phase.
Check Stock

LAPOND High Performance VFD Inverter VFD Drive 2.2KW 220V 3HP 9.6A,Variable Frequency Drive for Motor Speed Control,SVD-PS Series

  • This is single phase VFD with single phase 220V INPUT and three phase 220V OUTPUT,ONLY work with 3 phase 200-250V asynchronous motor,If your motor is heavy load, pls choose a higher Horsepower vfd than your motor's or contact sales for model selection suggestion..
  • SVD-PS Series VFD has better performance Vector controlled and stability to enable motor to achieve high torque in low speed rotation to increase motor working efficiency.
  • support fast accelerate/deccelerate with external optional braking resistor(100W ≥70Ω) and external potentiometer(10K).
  • Rich of digital and analogy control terminals for versitile control, well controlled fans produce low acoustics noise.The fan only work in VFD running status..
  • Application : spindle motor,lathe,milling,pumps,treadmills,conveyors,winding machine, mixer, extruder, slitter, compressor, ventilator,elevator,centrifuger and other machines..
  • We are the original factory,any technical issues do not hesitate to contact us.
Check Stock

VFD 220V 0.75KW 1hp Variable Frequency Drive CNC VFD Motor Drive Inverter Converter for Spindle Motor Speed Control HUANYANG HY-Series(0.75KW, 220V)

  • IMPORTANT NOTE: this VFD is applicable to THREE phase motor and NOT support external resistor.Fan runs all the time even though the motor isn't (fan functions need to be customized)..
  • This drive is very suitable for HIGH-SPEED ROTATION motors,such as spindle motor, engraving machine CNC.Work with 220V single phase input and 220V three phase input.you can just connected L1/L2 to any two of VFD input R/S/T.
  • This VFD can be used for constant torque loads (such as hard starting: Air compressors, HVAC units) and variable torque loads (such as pumps, fans, etc). It can be used as a motor speed control and a phase converter.This item use Sine wave PWN(SPWM) for the control system.It is designed which also could use USA 60hz single phase input.Can work well with the Mach 3 controller.
  • Application: Spindle motor.CNC router, CNC machine, milling machine, drilling machine, wingding machine, mixer, extruder, slitter, winder, compressor, ventilator, pump, grinder, conveyor, elevator, centrifuger and other speed control machines.
  • If there are problems in use after you receive,please don't give us negative or natural feedback.Please contact us as soon as possible, we will help you solve problems or help you replace new one ..
Check Stock